Diesel oil en 590 10 ppm & other grades, food stuff, textiles, gloves, masks, waste management machineries & plants, metal scrap, chemicals, water treatment plants, sewage treatment plants, waste water treatment plants, filtration systems, waste to energy plants, msw, e waste, metal recycling, lithium ion recycling, plastic waste to energy, tyre recycling, bio gas, biodiesel, diesel blending plants, waste sludge recycling,, waste heat recovery boilers .
Latex based products like latex examination gloves, surgical gloves, household gloves, pvc and leather gloves, condom, and petroleum products: en590 10ppm ulsd diesel.We are the seller mandate of a well established refinery in kazakhstan.
Tire cord fabrics are used as reinforcement for all categories of tyres - be it cycle, passenger car, light commercial vehicles, heavy commercial vehicles, tractor and off-the-road (OTR) tyres. It has the entire range of textile reinforcement including wicking and non-wicking chafer for heavy-duty tyres and tubeless radial tyres.
High quality medical grade gloves made from low allergic natural rubber latex, rigorously inspected and tested to exceed the requirements of the European Specification EN455 Part 1 (Freedom from holes), EN455 Part 2 (Physical Properties) and EN455 Part 3 (Biocompatibility) and ASTM D-3578. Lightly powdered with corn starch for bio-absorbability. * Natural Rubber Latex * Ambidextrous * Manufactured in Accordance with ASTM D3578/ EN 455/ FDA Specifications * Maximum Comfort and Protection * Lightly Powdered with USP Absorbable Dusting Powder * Fitting Beaded Cuff for easy donning and to prevent roll down * Available in a smooth surface or an exclusive textured surface * High tensile strength to minimize tearing
SteriMed Powderfree Latex Examination Gloves provide yet another complimentary alternative to meet the stringent demands of diverse users Ideal for medical use these gloves undergo an advanced halogenation washing process which minimizes sensitivity to allergic reactions * These lowprotein gloves also feature a specially textured surface to improve grip Pigment free with no fillers or waxes they offer better protection as they are less likely to absorb body fluids * Natural Rubber Latex * Ambidextrous * Manufactured in accordance with ASTM D3578 EN 455 FDA specifications * Low levels of soluble protein to further reduce incidences of skin sensitivity reactions * Micro roughened nonslip surface for optimal sensitivity * Fitting Beaded Cuff for easy donning * Continuous polymer coating buffers wearer from direct contact with latex to further reduce the risk of skin irritation
SteriMed Nitrile Gloves contain butadieneacrylonitrile a synthetic copolymer containing no natural rubber latex protein This eliminates the potential for Type I allergic reactions among NRL sensitive individuals and is chemically toughened for resistance in most solvents including petroleum * High flexibility and comfort * Excellent resistance against punctures water permeability * Superior chemical and solvent barrier protection * Textured fingertips for wet and dry grip * Fitting Beaded Cuff for easy donning and to prevent roll down * Excellent tactility with minimized hand fatigue
SteriMed Sterile Surgical Gloves are anatomically designed to provide maximum comfort and grip while reducing hand fatigue to the user The extractable NR latex proteins content is kept to the minimum thereby reduce skin allergic reactions In addition the gloves contain moderate dusting powder level which facilitates swift removal of powder prior to surgical procedures * High Strength Natural Rubber Latex * Low Modulus * Maximum Comfort and Protection * Micro roughened nonslip surface for excellent grip * Softer latex reduces hand fatigue and stronger latex reduces glove tearing * Conform to ASTM D3577 and EN 455 Specifications * Hypoallergenic minimizing potential allergic risks * Sterilized by Gamma Irradiation * Fitting beaded cuff * Punctureresistant design
* Another alternative to meeting the stringent demands of industry Designed to perform like a premium synthetic glove SteriMed Poly Chloroprene Gloves are without the associated risk of adverse reactions to proteins inherent in natural rubber latex * An effective hand protection barrier against contamination and infectious diseases the glove is also chemically toughened to provide extra protection against a broad range of chemicals and oils making it ideally suitable for handling acids caustics and alcohols * Chloroprene formulation allows for enhanced barrier protection of a synthetic glove with the comfort fit and feel of natural rubber * Being of latexfree nature thus eliminating potential Type I allergic reaction elicited by natural rubber proteins * The formulation offers low modulus allowing greater dexterity tactile sensitivity and reduced hand fatigue * The polymer coating not only facilitates ease of donning but also offers greater resistance to fluid permeation * Ambidextrous with textured fingertips for enhanced wet and dry grip * Low modulus for minimized hand fatigue
Household Gloves
Polyester yarn Polyester textured yarn:50d to 600d, semi dull, bright trilobal, black Polyester filament yarn:50d to 600d, semi dull, bright trilobal, black Preoriented yarn(poy):85d to 500d High twist yarn Grey and finished fabric Open end yarn Ring spun yarn Semi dull and bottle grade chips Carton and pallet
Polyester yarn, nylon yarn & fabric in greige and dyed.
[Product Information] 1. Dissolved non-woven mask filter - 100% polypropylene - White. - 0.1 to 0.3 micron - 20 to 50 gsm. - TSI8130 paraffin oil, TSI8130 NaCl (0.1 - 0.4 micron) - Roll. - Foundation (210-260mm) 2. Spunbond non-woven fabric - 100% polypropylene - White. - 10 to 60 gsm. - Roll (100mm to 2400mm) - Foundation (210-260mm) [Product Rating] Separation/MB / Basic Weight (g/m2) / Filtering Efficiency (%) / Pressure Loss / Test Method(mmAq) BFE 95 20 85 2.2 NaCl, 32l/min BFE99 22 90 2.5 NaCl, 32l/min N95 25 95 11.0 NaCl, 85l/min N99 25 99 13.0 NaCl, 85l/min Repeater(Vibration Level 1) , P2 35 94 15.0/12.0 paraffin, 95 l/min Repeater(Vibration Level 2) , P1 30 80 13.0 paraffin, 95 l/min KF94 40 94 14.0 paraffin oil, 95 liters/min KF80 30 80 12.0 paraffin oil, 95 liters/min Instrument: TSI 8130, Particle size: 0.3 micron Applications: 1. Filter material Gas filter: medical masks, room air conditioners filter material Liquid filter: beverage filtration, water filtration 2. Medical & Health Material Surgical Mask: inner and outer layers with spunbond material, in the middle is melt blown fabric. 3. Environmental protection material (oil absorbent material) Meltblown nonwovens used mainly PP material. It can absorb 17-20 times bigger than its own weight of oil, in environmental protection, you can make absorption felt, oil filter, etc., are widely used in marine oil spill, plant equipment ,sewage treatment and so on. 4.Clothing Materials meltblown nonwovens by the microfiber into a net, so its very soft feel. And the fabric of small aperture, high porosity, with very good wind resistance and good air permeability, light weight, is currently doing the best material for clothing insulation materials.
We are recognized as a reliable Manufacturer, Exporter and Supplier of Non Woven Fabric. We can provide Non Woven Fabric in any gram/sq. mtr and any color required by customer. Non Woven Fabrics are broadly defined as sheet or web structures bonded together by entangling fiber or filaments (and by perforating films) mechanically, thermally or chemically. PP Spun bonded Non woven Fabrics are produced using a precise extrusion-based technology. The polymer is stretched into a continuous filament and loosely spread onto a conveyor belt to form the web. Air is used to form and lay the fabric filaments. On the other hand, some non woven fabrics can be recycled after use, given the proper treatment and facilities. For this reason, Non woven fabrics is consider as a more ecological fabric for certain applications, especially in fields and industries where disposable products are important, such as hospitals, schools, nursing homes, hotels and luxury accommodations. Non woven fabrics have various Properties such as Stretch ability, Flame retardancy, Wash ability, Strength, Absorbency, Liquid repellency, Resilience, Softness, Cushioning, Filtering, Bacterial barrier and Sterility. These characteristics are frequently combined to make fabrics suitable for exact jobs.
Full grain 1.2mm cowhide leather suit which offer moto gp track tested protection , the suit features ergonomically positioned frontal zipper and strategically positioned accordion leather kevlar stretch panels to enhance comfort and promote an optimized racing fit 1.2mm grained, 5 to 6 kg, knee elbow , shoulder including plastic protection
Leather motor bike racing jacket made with cowhide 1.3mm kevlar under arms. Speed hump complete ce approved body armours in back/shoulders %26 elbows, 100% polyester quilting lining, original ykk zippers, connecting zip 8 inch to attach with trouser zipout lining (optional) 2 to 3.5 kg. Cowhide dimension
Brown Fused Aluminium Oxide (BFA)Â is widely used in production of Sand Paper, Sand Cloth, Sanding Belts etc. Our BFA is pure, angular, brown in colour, sharp-edged, low in magnetic content and clean. It\'s an ideal synthetic corundum for coated abrasive tools. It is roller milled material and it has sharp edge for removing dust, rust, oxide layer, paint on surface of metal and non-metal.Ã?Â
Meltblown and spunbond nonwoven suitable for producing medical PPE such as face mask and apron. We have various type of meltblown and spunbond. Serious Buyer may contact us directly via email with detail requirements. Price may vary depending on the requirements from Buyer. Delivery to any safe port of the world.
Note: The specifications mentioned are for common varieties of nitrile gloves. Specifications may vary based on color, size, and varieties of nitrile gloves Anti germs & bacteria, anti-dust & air particles Glass fiber-free Breathable High filtration capacity Adjustable nose bar Design & Features Disposable 3 ply face mask Storage Condition The face mask shall maintain its properties whilst in a closed pack and stored in a cool dry condition Shelf-life The face mask shall have a shelf life of 6 months from the date of manufacture based on the above storage condition Main varieties Non-Medical Disposable Face Mask, Non-sterile Material Polypropylene Spunbond Non-Woven Fabric & Polypropylene Meltblown Non-Woven Fabric Common colors Black, Blue, Others (based on requirements)
Unsaturated polyester resin, fiber glass.
Almandine Garnet is the heaviest and hardest of all abrasives in this world. � Garnet is a relatively hard mineral with a hardness that ranges between 6.5 and 7.5 on the Mohs scale. It could withstand in highest cutting speed and maintain low dust levels, with its crystalline shape giving a fast cutting action and longer life span. Garnet has served primarily for its many dimension applications i.e. blast media, water jet cutting, coated abrasives, surface preparation, grinding media, water filtration and so on.
