Welded ERW Mild Steel Rectangular Hollow Sections. Various thickness & size available. Size range: Rectangular: 38x19mm ~ 150x250mm, Thickness 1.2~9.0mm. Square: 19x19mm ~ 200x200mm, Thickness 1.2~9.0mm. Length: 6M, 12M or as requested. Spec: BSEN10255 / BSEN10219 / ASTM A500 or equivalent / as per requested. Grade: S195T / L275 / S275J0H or equivalent / as per requested. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
Welded ERW Mild Steel MS Pipe / ERW Pipes / Circular Hollow Section in various thickness & size. Size range:'' ~ 10, Thickness 1.2~9.0mm. Length: 6M, 12M or as requested. Spec: BSEN10255 / BSEN10219 / ASTM A500 or equivalent / as per requested. Grade: S195T / L275 / S275J0H or equivalent / as per requested. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
Cold-rolled steel coil in various thickness, may request to slit to desired width or cut to desired sheet length. Thickness 0.2~3mm Width max 1220mm. Specs: JIS G3141 or equivalent (Such as EN / ASTM / AS / NZS) / as per requested. Grade: SPCC-SD, SPCC-1B, SPCD-SD or equivalent / as per requested. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
Steel mesh for concrete reinforcement manufactured from cold-worked reinforcement bar. Size range: A142, A193, A252, A318, A393, A565 (A6~A12) Width 2.2M x Length 6M or as per requested. Specs: MS145 / SS561 or equivalent. Grade: B500A or equivalent. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
Hot-rolled steel plates or steel sheets in various thickness and size. Thickness 1.2mm~75mm. Max width 8ft. Max length 12192mm. Standard size or customized size available for request. Specs: ASTM / JIS G3101 / JIS G 3131 / JIS G3132 / JIS G3113 / BSEN 10025 or equivalent / as per requested. Grade: A36, A516, A588, A283, SS400, SS490, S275, S355, SPHC, SAPH or equivalent / as per requested. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
Hot-rolled steel coil in various thickness, may request to slit to desired width or cut to desired plate length. Thickness 1.2mm~25.4mm. Width max 2.428mtr, subject to thickness. Specs: ASTM / JIS G3101 / JIS G 3131 / JIS G3132 / JIS G3113 / BSEN 10025 or equivalent / as per requested. Grade: A36, A516, A588, A283, SS400, SS490, S275, S355, SPHC, SAPH or equivalent / as per requested. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
Rm hard drawn low carbon wire is made of cold drawing of wire rods. We produce sizes ranges from diameter 2.00mm to 9.80mm. Sizes: 2.00mm ----------- 9.80mm Weight: 200kgs ----------- 800kgs Inside dia: 400mm ----------- 750mm Tensile strength: Min 500 n/mm2 ----------- 1050 n/mm2 Application: Hard drawn low carbon wire can be used in variety range of general application 1) for galvanised wire coating 2) manufacture of steel fabric 3) nails manufacturing 4) basket, market trolleys, racks, chains, fasterners, fences. 5) bicycles manufacturing 6) steel wire for prestressed concrete product 7) others general industry applications
Welded ERW Galvanized Pipes or Galvanized Tubes in various thicknesses and size. Size range: up to 10, Thickness 1.2~9.0mm. Length: 6M, 12M or as requested. Spec: BSEN10255 / BSEN10219 / ASTM A500 or equivalent / as per requested. Grade: S195T / L275 / S275J0H or equivalent / as per requested. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
1) Hard drawn low carbon wire, 2) common wire nails, 3) reinforcement concrete mesh, 4) ribbed steel bar, 5) cut to sizes round bar (2mm - 12mm).
Carbon steel & stainless steel pipes, fittings & flanges.
Steel products, steel sheets, steel coils, steel plates, wire meshes, steel pipes, hollow sections, steel tubes, scaffolding, concrete reinforcement fabric, expanded metal, fencing meshes, chequered plates.
In addition to our stainless steel distribution, we also have a wide variety of coil and sheet process services located in johor bahru (malaysia), our coil center is managed by our fully own subsidiary excel metal industries sdn bhd. equipped with state of art technology and long experienced personnel, we manufacture products from slitting, cut to length and grinding to specific polished finishing..
Waste tire, scrap tire, tire derived material.
Pipes, beams, plates, high tensile plates, oil gas pipes, boiler plate, mesh brc, stainless steel shafts, carbon steel plate, special design iron & stainless teel grill pipes, engineering & construction pipes..
Bolts & nuts, anchor bolts, u bolts, double nnd stud bolts, hex bolts, stud bolts, hex nuts, flat washers, spring washers, , material, alloy steels: b7, b7m, b6, l7, l7m, l43, etc., stainless steels: b8, b8m, 660a, etc., super duplex: s32750, s32760, etc, , coating system, , electroplated coatings, zinc plating as per astm b633 or astm f1941, cadmium plating as per astm b766 or astm f1941, zinc nickel plating as per astm b841 or astm f1941, , fluoropolymer coatings, whitford xylan 1014.
Scrap metal (steel) .
Product Name: Ribbed wire International standard: MS 144:2001 RM ribbed wire has a ribbed ontop of plain round wire, and it is come with either in coils form or cut to sizes length. This ribbed wire are widely used in the fabrication of reinforcing mesh. It enhances the performance of structural concrete slabs and increase the tensile strength. Sizes: 6.00mm 7.00mm 8.00mm Lengths: 4 meters 12 meters Tensile strength N/mm2: Min 500 - 1275 Packing: a) Cut to sizes length, either straight or folded per bundles b) Coil form in 500 1 ton per coil. Application: 1. manufacture of wire mesh fabric of reinfocement concrete 2. prestressing of concrete 3. reinforcement for concrete slabs 4. partition panels 5. building construction 6. ties and lifting 7. general engineering or construction purposes
This Endurance Marine Drum Winch is a rugged 12V workhorse that's built to withstand the harshest weather conditions. The compact, fully-sealed gearbox with marine grade alloy is driven by a permanent magnetic motor. DC powered. What's Included (1) Drum winch (1) Hand switch (1) Solenoid Features + Benefits Dual direction solenoid and up/down switch allow for safe, easy control by a single user 1000 Watt HP 3500-lb. maximum pulling capacity 16 in. L x 16 in. W x 12 in. H size Durable stainless steel frame and drum Handles both rope and chain Key Specs Item# 29538 Brand Endurance Marine Manufacturer's Warranty 1 year Limited Warranty Ship Weight 35.0 lbs Volts 12 HP 1,000W Line Pull (lbs.) 3,500 max.; 990 lb. working load Line Speed (FPM) 65 Braking Switch Switching Method Up/down switch Battery Leads External stud w/insulator Mounting Hardware Included Stainless steel bolts Mounting Bolt Pattern L x W (in.) 3 3/8 x 3 1/2, 4 bolt staggered Dimensions L x W x H (in.) 16 x 16 x 12
Soap noodle, palm oil, cocoa, soap bar, gloves, furniture, animal feed.Ocean freight, road freight, custom clearance, warehouse, transload
Steel Slag Scarp Metal & Industrial Spare Parts.
