Pipes, beams, plates, high tensile plates, oil gas pipes, boiler plate, mesh brc, stainless steel shafts, carbon steel plate, special design iron & stainless teel grill pipes, engineering & construction pipes..
Hot-rolled steel plates or steel sheets in various thickness and size. Thickness 1.2mm~75mm. Max width 8ft. Max length 12192mm. Standard size or customized size available for request. Specs: ASTM / JIS G3101 / JIS G 3131 / JIS G3132 / JIS G3113 / BSEN 10025 or equivalent / as per requested. Grade: A36, A516, A588, A283, SS400, SS490, S275, S355, SPHC, SAPH or equivalent / as per requested. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
In addition to our stainless steel distribution, we also have a wide variety of coil and sheet process services located in johor bahru (malaysia), our coil center is managed by our fully own subsidiary excel metal industries sdn bhd. equipped with state of art technology and long experienced personnel, we manufacture products from slitting, cut to length and grinding to specific polished finishing..
Carbon steel & stainless steel pipes, fittings & flanges.
Steel products, steel sheets, steel coils, steel plates, wire meshes, steel pipes, hollow sections, steel tubes, scaffolding, concrete reinforcement fabric, expanded metal, fencing meshes, chequered plates.
Welded ERW Mild Steel Rectangular Hollow Sections. Various thickness & size available. Size range: Rectangular: 38x19mm ~ 150x250mm, Thickness 1.2~9.0mm. Square: 19x19mm ~ 200x200mm, Thickness 1.2~9.0mm. Length: 6M, 12M or as requested. Spec: BSEN10255 / BSEN10219 / ASTM A500 or equivalent / as per requested. Grade: S195T / L275 / S275J0H or equivalent / as per requested. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
Welded ERW Mild Steel MS Pipe / ERW Pipes / Circular Hollow Section in various thickness & size. Size range:'' ~ 10, Thickness 1.2~9.0mm. Length: 6M, 12M or as requested. Spec: BSEN10255 / BSEN10219 / ASTM A500 or equivalent / as per requested. Grade: S195T / L275 / S275J0H or equivalent / as per requested. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
Rm hard drawn low carbon wire is made of cold drawing of wire rods. We produce sizes ranges from diameter 2.00mm to 9.80mm. Sizes: 2.00mm ----------- 9.80mm Weight: 200kgs ----------- 800kgs Inside dia: 400mm ----------- 750mm Tensile strength: Min 500 n/mm2 ----------- 1050 n/mm2 Application: Hard drawn low carbon wire can be used in variety range of general application 1) for galvanised wire coating 2) manufacture of steel fabric 3) nails manufacturing 4) basket, market trolleys, racks, chains, fasterners, fences. 5) bicycles manufacturing 6) steel wire for prestressed concrete product 7) others general industry applications
Cold-rolled steel coil in various thickness, may request to slit to desired width or cut to desired sheet length. Thickness 0.2~3mm Width max 1220mm. Specs: JIS G3141 or equivalent (Such as EN / ASTM / AS / NZS) / as per requested. Grade: SPCC-SD, SPCC-1B, SPCD-SD or equivalent / as per requested. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
Steel mesh for concrete reinforcement manufactured from cold-worked reinforcement bar. Size range: A142, A193, A252, A318, A393, A565 (A6~A12) Width 2.2M x Length 6M or as per requested. Specs: MS145 / SS561 or equivalent. Grade: B500A or equivalent. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
Hot-rolled steel coil in various thickness, may request to slit to desired width or cut to desired plate length. Thickness 1.2mm~25.4mm. Width max 2.428mtr, subject to thickness. Specs: ASTM / JIS G3101 / JIS G 3131 / JIS G3132 / JIS G3113 / BSEN 10025 or equivalent / as per requested. Grade: A36, A516, A588, A283, SS400, SS490, S275, S355, SPHC, SAPH or equivalent / as per requested. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
Welded ERW Galvanized Pipes or Galvanized Tubes in various thicknesses and size. Size range: up to 10, Thickness 1.2~9.0mm. Length: 6M, 12M or as requested. Spec: BSEN10255 / BSEN10219 / ASTM A500 or equivalent / as per requested. Grade: S195T / L275 / S275J0H or equivalent / as per requested. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
Soap noodle, palm oil, cocoa, soap bar, gloves, furniture, animal feed.Ocean freight, road freight, custom clearance, warehouse, transload
1) Hard drawn low carbon wire, 2) common wire nails, 3) reinforcement concrete mesh, 4) ribbed steel bar, 5) cut to sizes round bar (2mm - 12mm).
Wide range of international brands for synthetic sling (webbing sling & round sling), wire rope sling, chain sling, steel wire rope, lifting chain, lashing system, shackle, hooks, tackle blocks, chain hoists, cargo net, pilot ladder, mooring system and marine equipments which are considered new to ecommerce..
Nitrile gloves non powder.
Bolts & nuts, anchor bolts, u bolts, double nnd stud bolts, hex bolts, stud bolts, hex nuts, flat washers, spring washers, , material, alloy steels: b7, b7m, b6, l7, l7m, l43, etc., stainless steels: b8, b8m, 660a, etc., super duplex: s32750, s32760, etc, , coating system, , electroplated coatings, zinc plating as per astm b633 or astm f1941, cadmium plating as per astm b766 or astm f1941, zinc nickel plating as per astm b841 or astm f1941, , fluoropolymer coatings, whitford xylan 1014.
Copper scrap.
Waste tire, scrap tire, tire derived material.
Production : From leaf sheath to plate is a whole process and consists of a few steps. Below the different steps are expained from harvesting the material till the disposal of the final product. 1. Harvest Areca palms leaves with the sheaths attached to it fall naturally from the trees three four times a year. By simply picking them up from the ground they are harvested.The amount of sheaths that can be collected from one tree at a time is two - three pieces. The average Areca palm plantation has around 2000 trees. One Areca sheath weights between 200g and 300g and has dimensions of 0,30 m by 1m. 2. Drying After harvest the sheaths need to be dried properly as the sheaths are prone to mold and fungus due to humidity. Normally the sheaths are dried in the open sun. However the time to dry will be approximately 6 months. For speeding up this process a Solar/ LPG drying unit will be designed. The use of an alternative form of fuel, such as LGP, makes it possible to continue production during periods of little sunlight.The dryer unit uses heated air to dry the sheaths. Also an effective drying storage facility will be designed to limit the drying time. 3. Cleaning After the drying process the sheaths need to be cleaned thoroughly in water to remove dirt and dust. This is done manually with a brush. During cleaning the sheaths will absorb water, which will make the sheaths more flexible for pressing. 4. Pressing with heat The sheaths are laid in the machines, whereas it will be pressed into the shape of the dies. These dies will be customizable to make plates of various shapes and sizes. They are heated by an external energy source and will be pressed with a certain amount of pressure, this changes the structure of the sheath particles making them fixed in their shape during pressing. A moisture content above 5% needs to be maintained during pressing or else cracks will appear in the products. Depending of the size of a sheath, multiple products can be pressed. 5. Finishing/ post cure After pressing the plates contain too high moisture content, this means that the plates need to be used immediately or need to be dried. After drying the plates can be stored up to 11 to 12 months.
