Vinyl gloves are economical as compared to latex and nitrile examination gloves. Latex Free Vinyl Gloves can withstand IPA washing and are widely used in the food industry. These gloves are ideal for doctors with latex allergy.
Latex-free, odour-free and powder-free
Can Withstand IPA washing (ISO Propyl Alcohol).
Can be used in food industry
Ideal for doctors with latex allergy
Product Information
Material 100% Synthetic Poly Vinyl Chloride (PVC), No Natural Rubber Latex Color Clear Design Ambidextrous, non-sterile, beaded cuff and smooth external finish Powder Content< 2.0 mg max per one piece of gloves
Sterilization : Non Sterile
Labeling : Shall comply with the corresponding labeling specification and customer requirement
Shelf Life : 3 years from the date of manufacture
Storage condition : Shall be stored in cool dry place and away from direct light
Naturally can be used for modern gasoline engine and diesel engine s in passenger cars and light truck. Low emission passenger car and light duty vehicle engines fitted with latest catalytic converter or diesel particulate filter technology.
53 Canned Vegetables Suppliers
Short on time? Let Canned Vegetables sellers contact you.
This product naturally can be used for modern gasoline engine and diesel engines in passenger cars and light truck. Low emission passenger car and light duty vehicle engines fitted with latest catalytic converter or diesel particulate filter technology.
Our company can supply a varieties of copper piping, copper bar, plate , strip and even rivets to name a few. Material wise we are able to cater for copper, brass, copper nickel, nickel silver and also stainless steel.
Kristall Ultimate Film is designed for glass surfaces. With its unique 3D curved technology, phones can be protected from edge to edge, even with curves. It provides a long-lasting shine that is easy and quick to use and will repel tiny particles of dirt and other environmental contaminants.
Nitrile gloves are manufactured using synthetic latex, contain no latex proteins, and are more puncture resistant than natural rubber. Powder Free Nitrile Gloves are anti-static in behavior, good solvent resistant, odour free, and hence useful in food and dairy industry.
Latex-free, odour-free and powder-free
Can Withstand IPA washing (ISO Propyl Alcohol).
Can be used in food industry / clean room enviroment
Product Information
Material Nitrile Rubber, This product does not contain protein found in Natural Rubber Latex
Colour : Lavender Blue Design Ambidextrous, sterile, beaded cuff and Extra rough (textured) at fingertip surface Powder Content< 2.0 mg/dm2 Extractable Protein Level<200 �µg/ dm2
Sterilization : Non Sterile
Labeling : Shall comply with the corresponding labeling specification and customer requirement
Shelf Life : 3 years from the date of manufacture
Storage condition : Shall be stored in cool dry place and away from direct light
Nitrile gloves are manufactured using synthetic latex, contain no latex proteins, and are more puncture resistant than natural rubber. Powder Free Nitrile Gloves are anti-static in behavior, good solvent resistant, odour free, and hence useful in food and dairy industry.
Latex-free, odour-free and powder-free
Can Withstand IPA washing (ISO Propyl Alcohol).
Can be used in food industry
Ideal for doctors with latex allergy
Product Information
Material Nitrile Rubber, This product does not contain protein found in Natural Rubber Latex
Colour : Lavender Blue Design Ambidextrous, sterile, beaded cuff and Extra rough (textured) at fingertip surface Powder Content< 2.0 mg/dm2 Extractable Protein Level<200 Aµg/ dm2
Sterilization : Non Sterile
Labeling : Shall comply with the corresponding labeling specification and customer requirement
Shelf Life : 3 years from the date of manufacture
Storage condition : Shall be stored in cool dry place and away from direct light
Description :
MS-601 is based upon Hybrid Silyl Modified Polyether Technology. It is suitable in wide range of industrial applications and it has excellent primerless adhesion to various types of substrates of dissimilar porosity, and surface textures. It also can be over painted with most of the types of paints. It is a technology that combines the unique features of Silicone and Polyurethane Sealants. It is a moisture cure system adhesive sealant and “NON” bubbling when apply in high humidity or to moist substrates. It is not suitable for structural glazing.
In today’s world, the smartphone is of course the device that we old most. Smartphone’s, in and of itself is not invulnerable, therefore, Kristall offers a solution; Kristall’s Ultimate Protector. With its unique 3D curved technology, phones can be protected from edge to edge, even with curves. Even though it is only 0.125mm in thickness, it is shatter resistant, and air bubble free. It’s easy to apply, allowing you to remove or reposition the protector yourself. On top of that, it has anti-dirt and dust properties so that you may always enjoy a clean smartphone.
Production :
From leaf sheath to plate is a whole process and consists of a few steps. Below the different steps are expained from harvesting the material till the disposal of the final product.
1. Harvest
Areca palms leaves with the sheaths attached to it fall naturally from the trees three four times a year. By simply picking them up from the ground they are harvested.The amount of sheaths that can be collected from one tree at a time is two - three pieces. The average Areca palm plantation has around 2000 trees. One Areca sheath weights between 200g and 300g and has dimensions of 0,30 m by 1m.
2. Drying
After harvest the sheaths need to be dried properly as the sheaths are prone to mold and fungus due to humidity. Normally the sheaths are dried in the open sun. However the time to dry will be approximately 6 months. For speeding up this process a Solar/ LPG drying unit will be designed. The use of an alternative form of fuel, such as LGP, makes it possible to continue production during periods of little sunlight.The dryer unit uses heated air to dry the sheaths. Also an effective drying storage facility will be designed to limit the drying time.
3. Cleaning
After the drying process the sheaths need to be cleaned thoroughly in water to remove dirt and dust. This is done manually with a brush. During cleaning the sheaths will absorb water, which will make the sheaths more flexible for pressing.
4. Pressing with heat
The sheaths are laid in the machines, whereas it will be pressed into the shape of the dies. These dies will be customizable to make plates of various shapes and sizes. They are heated by an external energy source and will be pressed with a certain amount of pressure, this changes the structure of the sheath particles making them fixed in their shape during pressing. A moisture content above 5% needs to be maintained during pressing or else cracks will appear in the products. Depending of the size of a sheath, multiple products can be pressed.
5. Finishing/ post cure
After pressing the plates contain too high moisture content, this means that the plates need to be used immediately or need to be dried. After drying the plates can be stored up to 11 to 12 months.
Rm hard drawn low carbon wire is made of cold drawing of wire rods. We produce sizes ranges from diameter 2.00mm to 9.80mm.
Sizes:
2.00mm ----------- 9.80mm
Weight:
200kgs ----------- 800kgs
Inside dia:
400mm ----------- 750mm
Tensile strength:
Min 500 n/mm2 ----------- 1050 n/mm2
Application:
Hard drawn low carbon wire can be used in variety range of general application
1) for galvanised wire coating
2) manufacture of steel fabric
3) nails manufacturing
4) basket, market trolleys, racks, chains, fasterners, fences.
5) bicycles manufacturing
6) steel wire for prestressed concrete product
7) others general industry applications
.jpg?format=webp)
