SiO2 above 99.0% Fe203 - 0.03% Sizing - Majority 2mm and below
Product Name: Silica Sand Specifications: 99.55% & Fe2O3 level at around 0.008% or less. Quantity Required : Trial 50,000 Metric Ton/Metric Tons ,Min 200,000 Metric Ton Monthly Shipping Terms : FOB Destination Port : Port Kuantan , Malaysia Payment Terms : LC Looking for buyer from : Worldwide Contact Yazman
We supply the best quality GYPSUM POWDER with the finest and high whiteness qualities from sophisticated screening technology for higher purity of Gypsum Powder. We make it available in two sizes: Mesh 100 and Mesh 200. Applications: Use to manufacture gypsum panel or building plaster Use to manufacture Gypsum Board, suspended ceiling, plaster ceiling, cornices,... etc Decorative coating for walls Use to make gypsum mold or statutes As grout of marble, clay, and ceiling tiles As a color additive Act as an additive to other products
Gypsum Rock extensively used as a raw material for manufacturing fertilizers, paints, construction materials. We make it available in bulk in chemical-grade packaging. We produce sized natural Gypsum with purity MIN 90% percent that general usage in cement industry and Gypsum factories. Application Use to manufacturer gypsum panel and building plaster Use for Gypsum Boards and ceiling boards Use to make Gypsum Powder (Plaster of Paris) Use to manufacturer cement Use as fertilizer Use by chemical factories
We supply Crystal Gypsum which is 99.99% pure to provide solutions for the food and medical industries.
Laira Group offers high-quality natural white barite from qualified mines and various mining exploration, we can deliver on the bulk carrier and container basis to the requested destination. Besides offering other grades of brightness according to customer requirements.
The Laira Group supplies KAOLIN (KCC - KCC-z - KCR- KCP2) in both its finest and varying sizes. It Varies from other industrial clays on the basis of its fine particle size and pure coloring. it is also called china clay, soft white clay, which is an important ingredient in the manufacture of china and porcelain. We offer it in White and Off-White colors.
Feldspar is the single most abundant mineral group on Earth. The different types of feldspar make up half of the Earth's crust. Laira group is one of the market leaders in the supply of lump, chipped & micronized feldspar with excellent quality at an affordable price to most of the ceramic, tile, glaze, sanitary & tableware factories.
Gilsonite is a natural, resinous hydrocarbon, in mass is a shiny, black substance, but sometimes it occurs as a brownish-black color that is similar in appearance to coal or a hard petroleum asphalt and is often called a natural asphalt, asphaltite, uintaite, or asphaltum. Gilsonite is used in more than 160 products, A common application of it is in bitumen blending. Laira Group offers Gilsonite with excellent quality and different sizes and meshes in the market locally and internationally.
Penetration Grade Bitumen is a standard bitumen usually used as a Paving Grade Bitumen essential for road construction and the production of asphalt pavements with superior properties, and it's very important once it bounds the aggregates and creates a unique cohesion and stability to the bituminous mix. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Grades of penetration bitumen: The most popular grades are; grades 40/50, 60/70, 80/100, 85/100, and 100/120. We are also capable of producing other grades of Penetration Bitumen upon request by our customers.
Laira Group is capable of selling bitumen to its customers based on the PG method. PG is defined as polymer-modified bitumen and pure bitumen based on environmental conditions and temperature. HIGH-TEMPERATURE PERFORMANCE LOW-TEMPERATURE PERFORMANCE PG 46 -34, -40,-46 PG 52 -10, -16, -22, -28, -34,-40,-46V PG 58 -10, -16, -22, -28, -34, -40 PG 64 -10, -16, -22, -28, -34, -40 PG 70 -10, -16, -22, -28, -34, -40 PG 76 -10, -16, -22, -28, -34 PG 82 -10, -16, -22, -28, -34
To grade the bitumen-based on viscosity BIS revised IS-73-1992 specifications (Viscosity at 60 C) and as such there are four grades VG-10, VG-20, VG-30 & VG-40. A few qualification tests like specific gravity, water content, ductility, loss on heating & fares breaking point were removed from IS:73-1992 as these tests do not have any relationship with the performance of the product. Viscosity Grade Bitumen is widely used in spraying applications such as surface-dressing and paving in very cold climates. It is also used to manufacture bitumen emulsion and modified bitumen products.
Cutback Bitumen is made by reducing the viscosity of and ordinary bitumen by adding mostly petroleum-type solvent. Cutback Bitumen is used because its viscosity is lower than that of neat asphalt and can thus be used in low-temperature applications. Cutbacks are divided into three classification: Slow Curing (SC) SC-70 SC-250 SC-800 SC-3000, Medium Curing (MC) MC-30 MC-70 MC-250 MC-800 MC-3000, Rapid Curing (RC) RC-70 RC-250 RC-800 RC-3000. Laira Group offers high quality and reasonable prices, due to several years of experience in delivering Bitumen products, the Laira sales team is dedicated and understands your requirements.
Bitumen emulsion consists of three basic ingredients: bitumen, water, and an emulsifying agent. Based on specifications it may contain other additives, such as stabilizers, coating improvers, anti-strips, or break control agents. It is well known that water and asphalt will not mix, except under carefully controlled conditions using highly specialized equipment and chemical additives. Bitumen emulsions are divided into three categories in terms of setting: 1. Rapid-setting (RS) 2. Medium-setting (MS) 3. Slow-setting (SS)
Medium/High-Density Polyethylene (MD/HDPE) is widely used for manufacturing various goods like film, containers, bottles, plastic parts, home appliances, pipes, blow molding parts, etc. Laira Group is one of the market leaders in the supply of petrochemical products with excellent quality at an affordable price per customer requirement. If you are more interested in product information or need to place an order contact or inquire about our Sales team.
Low-Density Polyethylene (LDPE) is a thermoplastic made from the monomer ethylene which is widely used for manufacturing various goods like plastic bags, film, containers, toys, plastic parts, home appliances, flexible injection parts, etc. Laira group is one of the market leaders in the supply of petrochemical products with excellent quality at an affordable price. Laira's sales team is committed to understanding your requirements as a result of many years of experience in the supply sector.
Sulfur is one of the most significant agricultural and industrial raw materials and is considered a strategic product. sulfur is a nonmetal that is an odorless, tasteless, and polyvalent which is mostly in the form of yellow crystals and is obtained from sulfide and sulfate. The Laira Group is a supply organization offering Sulphur Granules and Lumps with a degree of assurance and trust, which makes Liara stands unique. As Laira Group actively engaged in offering the finest quality, we leave no stone unturned to acquire Sulphur from the most reliable vendors
Model : STX-15F Type: Personal Watercraft Length: 104 Year: 2020 / New Capacity: 1-3 person ENGINE: Cooling System: Water-cooled Type: 4-stroke In-Line Four Displacement: 1,498 cm³ Injection System: Digital Fuel Injection Fuel Capacity: 78L Weight: 475 kg
Type : Stern drive Clutch type : Hydraulic multiple friction plate type clutch Rated Output : 370 mhp / 272 kW Reduction ratio (fwd / rev): 1.65 / 1.65 | 1.78 / 1.78 | 1.97 / 1.97 Dry weight : 112 kg (247 lbs) Direction of rotation :I/P Counterclockwise, O/P Counterclockwise Trim zone : -6 to 10
Yamaha Series: FT60GETL, F75FETL, F100GETL, F115BETX, F115BETL, F150FETX / Suzuki Series: DF60ATV, DF60ATL-A, DF90ATL, DF115ATL, DF115ATX, DF115BTX-A, DF150TX, DF150TX-A
