Malaysian Industrial And Automotive Suppliers and Manufacturers

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension: 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130- 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension: 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130- 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension: 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE Mesh 120/inch Tension: 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 -4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 -4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension: 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension: 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 110 - 135oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 -160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension: 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 -160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Silkflex Nylon Oxal

Silkflex Crosslinker

Silkflex Eco Oxal

Silkflex Part B

Silkbond 35

NON-NEGOTIABLE FOB JURONG PORT, SINGAPORE TRANSACTION PROCEDURES 1. Buyer sends ICPO along with the Company Profile to the Seller on receipt of Sellerâ??s Soft Offer (SCO). 2. Seller issues a Commercial Invoice (CI) for the Buyer to sign and returns the CI with Vessel Charter Party Agreement Contract (CPA) to the Seller acknowledging Buyer is legally binding commitment to purchase under the terms and conditions herein. 2b. Seller sends the Buyer the following POP Document for Buyers verification. a) ATSC (Authority to Sell Collect), b) Product Passport (product Analysis Report), c) Availability of the Product Letter, d) Commitment to Supply Letter. 3. Sellers provide the Storage Reservoir Company details of where the Seller product is currently stored for the Buyer to contact and sign the Tank to Vessel Injection Agreement Contract (TTVIAC) with the Reservoir Company. In Other for Buyer to pay Tank to Vessel Injection charges Fees. 4. Buyer issues and present the Tank to Vessel Injection Agreement Contract (TTVIAC) and Payment Receipt to Seller for verification and acceptance. 5. Seller issues the below POP document after the confirmation of the Tank to Vessel Injection Agreement Contract (TTVIAC) and Payment Receipt. (a) Fresh SGS report (not older than 72 hours). (b) Tank Injection Report. (c) Tank Storage Receipt (TSR) With terminal name, tank number, barcode and GPS Coordinate. (d) Company Certificate. 6. Seller issues Dip Test Authorization document (DTA), which is countersigned & sealed by the Buyer, Seller, and Reservoir Company, along with the NCNDA/IMFPA, to signs by the Seller and Buyer sides, and all Mandates and Intermediaries involved. 7. After the countersigning of DTA by all parties, Seller provides the Reservoir Receipt, a Notice of Readiness (NOR) and injection schedule to Buyer upon injecting the fuel into Buyersâ?? vessel. 8. Seller injects the total product allocation into Buyerâ??s vessel and furnishes Buyer the full Injection Report document to notify and show the Proof of the Products injected into Buyerâ??s vessel and Buyer pay the total product cost by MT 103 T/T to Seller account. The Seller transfers the Title Ownership Certificate to the Buyer. 9. Seller pays commission to Agents, Brokers and Intermediaries involved in the transaction and negotiations continue for the 12 months contract to sign with the Buyer based on this contract terms.

We are supplier of high purity quartz COO India. Capability 3000-5000MT of 99.97-99.99sio² per/month. For further inquiry please feel free to contact me a

-we can supply monthly 3-4 containers. -we do supply both white and grey. -if you are interested you can directly contact me

FOB JURONG PORT TRANSACTION PROCEDURE - (TANK TO VESSEL)  630$ ORIGIN KAZAKHSTAN 100,000 MT ( TANK FEE 200,000$ : BLOCK FUND / PARK TO LAWYER ) SELLER WILL PAY THE TANK FEE FIRST SO EASY FOR BUYER TO DO A DIP-TEST. 1. Buyer Issues ICPO addressed to the Seller through the Seller Mandate along with Charter Party Agreement (CPA) and POF 2. Seller Acknowledges Buyer ICPO and issues Commercial Invoice, Buyer signs and return back Commercial Invoice (CI). 3. Seller provides Buyer with the below listed PPOP: Transfer Agreement for Title Holder Certificate "To be signed by seller and buyer" Tank to Vessel Injection Agreement (TTVIA) "To be signed by buyer and the shipping company". Authorization to Sell and Collect (ATSC) Irrevocable Commitment Letter to Supply. Injection Payment Invoice 4. (NCNDA/IMPFA) to be signed by all intermediaries involved in the transactions and Buyer makes payment for the Injection cost from Tank to Vessel. 5. Upon confirmation of the buyer payment for the Injection cost, seller provides buyer the following POP documents below; Unconditional DTA. 24Hrs SGS Report. Injection Report. Tank Storage Receipt. Product Origin Certificate. Product Passport. Authorization to Verify (ATV) 6. Buyer SGS team re-conduct inspection on the product in seller storage tank on sellers expenses. (Optional), 7. Buyer within 24 hours after successful Dip Test in seller tanks provides Q88. Seller proceeds for tank to vessel injection and provide buyer with SGS report and injection reports upon completing injection of the product into buyer's vessel. 8. Buyer make payment for the total cost of product injected into the buyer vessel through MT103, seller transfer Title ownership to buyer with all exportation documents required of buyer for the transactions. 9. Upon the conclusion of every lift transaction seller pay all intermediaries involved in the transaction according to signed NCNDA/IMFPA and proceed with the signing of the contract with buyer. whatsapp: +60135953754