CONCENTRATE STORAGE CAPACITY: For Vertical Tank 140 litres to 7500 litres (36 TO 2000 Gallon (US), For Horizontal Tank 140 litres to 15000 litres (36 to 4000 Gallon), MATERIAL: Carbon Steel/Stainless Steel(ASME Standard), ASME STAMP: Optional, BLADDER: Buna-N, AVAILABLE MOUNTING TYPE: Vertical and Horizontal bladder tanks, DESIGNED AND CONSTRUCTED IN ACCORDANCE WITH: ASME Code Section Vlll Div.1, MAXIMUM WORKING PRESSURE: 12 Bar (175 PSI), FACTORY HYDRO TEST: As per ASME code TEST PRESSURE, VENT AND DRAIN: Ball valve, RATIO CONTROLLER: Wafer type with Stainless Steel 304/CF8 standard supply - Optional: Stainless Steel 316/CF8M or Bronze - Optional - Flanged Type, CE MARK: Optional, FINISH: Red, FOAM PROPORTIONING RATIO: 1%, 3%, 6% with AFFF foam concentrate
SPECIFICATIONS: - UL Listed and FM Approved - Require less space than foam pump skid - Designed for maximum agent discharge - Permanently welded lifting lugs for easy tank movement and positioning - Tanks are Externally Red enamel-coated AVAILABILITY: - Material: Carbon Steel/ Stainless Steel (ASME Standard) - Finishing: Red CAPACITY: - Vertical Type: 36 - 2000 Gallons (140 - 7500 Liters) - Horizontal Type: 36 - 4000 Gallons (140 - 15000 Liters)
We supply PVC Coated tarpaulin Stocklot. 4 FCL per month.
Steel Grit
PS Ball
Steel Shot
2-4 meters wide weight 90gs - 350gsm
Waterstop is " A section of flexible waterproofing material placed at any joint in concrete to prevent passage of water ". Joints in concrete structures, one side is subject to hydrostatic load, are provided with waterstops bridging the joints and embedded in concrete on either side. In concrete joints where expansion and contraction cause the joints to close and open, waterstop then are designed to accommodate itself to such movements. Flexijoint PVC Series Waterstop is extruded from specially formulated and blended high grade PVC compound. It meets local " SIRIM " standard specification and international standard and widely applied in construction industry. Flexijoint PVC " W " Series :- 150mm ~ Good application to construction joints commonly use in floors,walls and underground slabs; 200mm ~ Good application to walls and under slabs where water pressure is higher than " W " series 150mm; 250mm ~ Good application to reservoirs, dams and under tunnel. Flexijoint PVC Waterstop Application: Dams, Canals, Aquaducts, Large Reservoirs, Irrigation Projects, Bridges, Roads, Tunnels, Water Tanks, Swimming Pools, Water Filteration Plants, Sewerage Disposal System Neutralization Tanks, Basements, Foundation Floor Slabs, Retaining Walls, Effluent Treatment Plants, Thermal Power Stations, Shipyards, Docks, Cooling Towers.
Waterstop is " A section of flexible waterproofing material placed at any joint in concrete to prevent passage of water ". Joints in concrete structures, one side is subject to hydrostatic load, are provided with waterstops bridging the joints and embedded in concrete on either side. In concrete joints where expansion and contraction cause the joints to close and open, waterstop then are designed to accommodate itself to such movements. Flexijoint PVC Series Waterstop is extruded from specially formulated and blended high grade PVC compound. It meets local " SIRIM " standard specification and international standard and widely applied in construction industry. Standard packaging of 200mm (FXJ - RR200) and 250mm (FXJ - RR250) width available to accommodate concrete contraction joints. 150mm width packing available upon request. Flexijoint PVC Waterstop Application: Dams, Canals, Aquaducts, Large Reservoirs, Irrigation Projects, Bridges, Roads, Tunnels, Water Tanks, Swimming Pools, Water Filteration Plants, Sewerage Disposal System Neutralization Tanks, Basements, Foundation Floor Slabs, Retaining Walls, Effluent Treatment Plants, Thermal Power Stations, Shipyards, Docks, Cooling Towers.
Waterstop is " A section of flexible waterproofing material placed at any joint in concrete to prevent passage of water ". Joints in concrete structures, one side is subject to hydrostatic load, are provided with waterstops bridging the joints and embedded in concrete on either side. In concrete joints where expansion and contraction cause the joints to close and open, waterstop then are designed to accommodate itself to such movements. Flexijoint PVC Series Waterstop is extruded from specially formulated and blended high grade PVC compound. It meets local " SIRIM " standard specification and international standard and widely applied in construction industry. Flexijoint PVC " H " Series :- 150mm ~ Good application to expansion joints of low water pressure; 200mm ~ Good application to expansion joints where water pressure and displacements are greater than the " H " Series 150mm; 250mm ~ Good application to high water pressure like in reservoirs, dams, sewerage plants and water gates. Flexijoint PVC Waterstop Application: Dams, Canals, Aquaducts, Large Reservoirs, Irrigation Projects, Bridges, Roads, Tunnels, Water Tanks, Swimming Pools, Water Filteration Plants, Sewerage Disposal System Neutralization Tanks, Basements, Foundation Floor Slabs, Retaining Walls, Effluent Treatment Plants, Thermal Power Stations, Shipyards, Docks, Cooling Towers.
Urea, fertilizer, polymer, PVC, HDPE, LDPE, bitumen, wax, fuel oil, cement, food stuff.Sale and purchase
Thermal insulation material for hvac system .Manufacturer/oem
R.C.S. Manufacturing Sdn. Bhd. uses selected silica sand coating with phenolic resin to produce high grade Resin Coated Sand by using Hot Mixing Method, which contains 0.8% to 4% of Resin, with an AFS number ranging from AFS 40 to AFS 90. The bending strength of the product ranges from 12kg/cm�² to 150kg/cm�². Each and every resin coated sand formulation can be customized so you can optimize your operation\'s unique capabilities. Resin coated sand can produce the shell core and shell mould for the following parts: 1) Automobile and motorcycle engine parts 2) Aluminium alloy casting 3) Grey iron casting 4) Brass and copper casting 5) Stainless steel casting
River Sand Sea sand available, 2,000,000MT can be supply monthly long term worldwide, FOB very low price.
River Sand available, 3,000,000MT can be supply worldwide, FOB price, very low price.
River / Estuary Sand Sand saiz, quality and grade is upon requested Quantity : Minimum 30,000 or 50,000 Mt / Cbm per month Packing : In Bulk / Mother Vessel / STS / Upon Requested Payment : LC Noted : Price offer will be base upon standard international market price, distance country to shipment, and upon grade,quality and sizing of the sand..
Malayia River Sand
CPP (Cast PolyPropylene) Film is produced simply by extruding resin onto a chill roller. there is no stretching but the film does have to be "cured" so allowing the slip additives to migrate to the surface. It can be produced as a mono or coex film with different copolymer combinations to alter rigidity and mechanical properties. It normallly comes as standard with 1 side corona treatment.
We provide FOB riversand in 9.50usd..
New-Unused (Old Stock) Commodity: Genset Model: C18 Caterpillar Serial Number: (GPN00113) Power : 514Hp AT 1500RPM Available: 2 Unit only Location: Malaysia
