Computer, RUVO Brand.
Cpu - intel pentium.
Computer.
Computer parts.
Computer accessories.
Notebook parts and tie batik.
Computer.IT Services
IBM/lenovo, HP/Compaq and DELL spare parts.
Agriculture product, computer accessories.
Computers.
Computer part.
Computer.
Denatured ethanol 96%, a4 paper, scrap motherboard, power supply, used cooking oil, face towel.
Active Components (ic Integrated Circuits, Memory Chips, Diodes, Transistors, Etc.), Passive Components (capacitors, Resistors, Inductors, Etc.), Electromechanical Components (connectors, Switching Devices).
Complete elevator, parts and motors.
Mobile, tablet, notebook, printer, TV, aircond, fridge, washing machine.Trading
The MM7025 is an ideal two-channel power amplifier with whopping 140W RMS into 8 ohms per channel. Use it in an AV setup to give your front channels an earth-moving boost or in combination with a HiFi Pre-Amplifier to create a high quality 2 Channel System. Current Feedback Current Feedback amplification is a well known, Marantz original circuit technology. The Current Feedback amplifier technology fits perfectly with the high requirements set for Super Audio software providing wide-bandwidth, high-speed reproduction. The impedance at the Current Feedback point is limited resulting in a very low phase shift. Marantz receivers and amplifiers equipped with Current Feedback can keep the phase compensation via Negative FeedBack (NFB) to a minimum, resulting in high through-rate, excellent transient response and superb sonic transparency for the full bandwidth. Unlike conventional Voltage Feedback amplification, the Current Feedback amplification makes the power amplifier in-sensitive to difficult loudspeaker loads. Customized Components On paper an electrical component might look excellent but the result may fall short of the combined design expectations. Marantz selects the appropriate components for the specific design application. In some cases its simply not possible to use standard components that meet the high Marantz standards. These components will then be specially made for Marantz in close cooperation with the Marantz engineers. DC-Trigger A DC trigger is an assignable voltage output which can automatically control for example an electrical projection screen, lowering it when the DVD input is chosen on the receiver. IR Flasher IN The IR-Flasher IN is a standardized connection to control the AV system by external IR receivers independent of the infra red control format used. On the IR-Flasher OUT an IR-Emitter can be connected to controlled third brand components. The third connection link to this is the IR-Receiver INPUT which is similar to the IR-Flasher In, but it outputs a voltage to directly feet an external IR-Receiver eye. Please check capability per product in the specification section. Linear drive power supply LDPS Marantz own technology to design a power supply capable to follow all details of an audio signal to reproduce the finest sound quality.
Designed as the perfect Partner to the Marantz AV8802A processor it,s 7 channels deliver 150W (8 ohm) of RMS power (20Hz-20kHz). Designed for the ultimate music and movie surround sound experience, the MM8077 7-channel power amplifier is equipped with the same amplifier technologies that are incorporated in our reference class hi-fi amplifiers, including our unique current feedback discrete power amplifier stage design, which features a high slew rate that provides a wide bandwidth for the utmost enjoyment of today,s high resolution audio formats. All output stages feature identical topology for uniform high quality sound across all channels, and the MM8077 provides the option to choose between balanced (XLR) and unbalanced (RCA) inputs for each channel, for maximum system configuration flexibility. High current, high bandwidth discrete power transistors can handle short term musical bursts with aplomb, even into difficult low impedance speaker loads. 7x 150W (8 ohm), 7x 180W (6 ohm) RMS power (20Hz-20kHz) Current feedback discrete power amplifier High current power supply with toroidal power transfomer Marantz reference-grade power supply filter capacitors and high speed, high current discrete power transistors Low impedance continuous drive capability Highest sound quality design based on pure surround philosophy Copper plated chassis Gold plated, high grade speaker terminals Flasher input, DC trigger (in/out), Remote control (in/out)
Electronic specifications Total harmonic distortion 0.0015% Frequency response +/-0.5db from 4hz to 20, 000hz +0.5/-3db from 4hz to 68, 000hz (source dependent) Maximum volts out (balanced / unbalanced) 16/8 v rms Input impedance (balanced / unbalanced) N/a Phono voltage gain N/a High level voltage gain N/a Signal to noise ratio 110db Dual mono power supply No Dual mono, fully balanced Digital, fully balanced Connectivity Balanced inputs 0 Unbalanced inputs 0 Phono moving coil input 0 Phono moving magnet input 0 Digital coaxial input 2 Digital optical input 2 Digital mct (din) input 1 Digital usb input 1 (2.0, 32/192 asynchronous) 44.1khz to 384khz, 32-bit (pcm) dsd64, dsd128, dxd352.8khz, dxd384khz Digital aes/ebu input 0 Balanced fixed outputs 1 stereo Balanced variable outputs 1 stereo Unbalanced fixed outputs 1 stereo Unbalanced variable outputs 1 stereo Headphone output 1/4â?³ high drive Record processor loop No Input level match No Home theater pass through No Control Tone controls No Tone bypass and input assign No Rs232 control input No Power control output 1 Rear panel data ports 1 Rear panel ir sensor input Yes General specifications Multi-chassis or single Single Output meters No Tube or solid state Solid state On, power consumption 30 watts Weights & dimensions Dimensions (w x h x d) 17.5â?³ (44.45cm) x 3-7/8â?³ (9.8cm) x 16â?³ (40.64cm) Weight 13.5 lbs (6.1kg) Shipping weight 28 lbs (12.7kg)
2-Channel Phono Preamplifier Moving Coil & Moving Magnet inputs Analog outputs + USB for ripping to computer The MP100 is the first dedicated phono preamplifier from McIntosh and is designed to help both new and experienced vinyl lovers get the most fidelity, performance and most importantly enjoyment from their albums. Like all McIntosh products, the MP100 is packed with features designed specifically for the vinyl lover including: Moving Coil and Moving Magnet inputs; Moving Coil and Moving Magnet adjustable loading (6 settings each); balanced and unbalanced analog outputs; optical, coax and USB digital outputs; and a Mono switch for when playing mono records to decrease noise and play the signal correctly. There are many ways to integrate the MP100 into your audio system. If youre new to vinyl and just building your system, it can become the main part of your setup. Or if you already have a system with an older preamp you dont want to part with, the MP100 is an excellent way to add modern phono features. If youve got a home theatersystem and would like to add a turntable, the MP100 is an easy way to add full phono preamp capabilities without having to get a full-sized stereo preamp that would undoubtedly duplicate many of your home theater processors features. While spinning vinyl on a turntable is a great and unique way to enjoy music, theres no denying the convenience of having digital versions of the albums. When used with a properly configured conversion program, the MP100 can rip the records to a computer via USB to produce high quality digital files. The digital outputs are fixed at 24-bit/96kHz to capture the full dynamic range of a record while optimizing digital file size. If an album has a very loud section, the clipping indicator will alert you so you can lower the digital output in order to produce a distortion-free recording. Compact in size at just 3 tall, it has many ageless McIntosh design cues. It shares the same 11.5 narrow chassis design as the MXA70 Integrated Audio System, MHA100 Headphone Amplifier and MB50 Streaming Audio Player to help build a cohesive system. It can also easily be added to a system comprised of standard, wider width chassis.
