Secure dongle was built based on advanced microprocessor smart chip which has been certified by eal4+ and itsec. The smart chip based hardware architecture ensures complete security against risk of dongle hardware being cloned or duplicated. In addition to hardware advantage, securedongle was also built with a very user friendly interfaces on its bundled firmware and utilities. Securedongle feature highlights:- * built-in rsa, des and 3des encryption algorithms Smart chip is preloaded with rsa/des/3des security algorithms which ready to provide powerful encryption/decryption perform on hardware. Developers can make use of those ready security algorithms to perform advanced challenge-response authentication in their securedongle software protection. * security password Valid 2-level 64-bit password is required in order to gain access into securedongle. Developers can set and change their own security password which ensures higher privacy. Moreover, securedongle have built-in advanced password protection system that can prevent brute-force attack. * globally unique hardware id 32-bit pre-burnt and unchangeable globally unique hardware id provides unique reference on each individual securedongle. Even us - the manufacturer do not have the privilege to change it. * module zone Up to 64 secure protected module zones which facilitate unreadable memory and can also be used as the validity flags to protect up to 64 software modules, provides easy licensing management. * self definable security algorithms Up to 128 self definable security algorithms that will be executed on-board when called by protected software which will then be authenticated using the popular challenge response authentication to maximize the security level of the protection. * soft timer Built-in with innovative soft timer that requires no battery but still support protection using expiry time or date. 13cm x 13cm x 1.5cm , weight is 0.5kg
Memory modules 512m ddr400 standard, 1gb ddr400 only for via and sis
Used laptop.
Memory chips Micron MT29F128G08CBCAB, Product Xilink XCF128P Micron.Manufacturer & exporter
Built using their V-NAND 3-bit MLC flash technology and in-house controller, the Samsung 4TB 990 PRO PCIe 4.0 x4 M.2 Internal SSD offers an M.2 2280 form factor and a PCIe 4.0 x4 / NVMe 2.0 interface to deliver sequential read speeds of up to 7450 MB/s and sequential write speeds of up to 6900 MB/s. Users will also have access to encryption via TCG/Opal 2.0 and MS eDrive, while a TBW (Total Bytes Written) rating of 2400TB helps ensure a long operational life.
Built using their V-NAND 3-bit MLC flash technology and in-house controller, the Samsung 2TB 990 PRO PCIe 4.0 x4 M.2 Internal SSD offers an M.2 2280 form factor and a PCIe 4.0 x4 / NVMe 2.0 interface to deliver sequential read speeds of up to 7450 MB/s and sequential write speeds of up to 6900 MB/s. Users will also have access to encryption via TCG/Opal 2.0 and MS eDrive, while a TBW (Total Bytes Written) rating of 1200TB helps ensure a long operational life.
Designed to deliver performance, reliability, and dependability in multi-bay, multi-user RAID and NAS environments within commercial and enterprise settings, the 16TB IronWolf Pro 7200 rpm SATA III 3.5" Internal NAS HDD from Seagate is built to withstand 24/7 operation, or 8760 hours per year. This 16TB drive has been equipped with a SATA III 6 Gb/s interface, a rotational speed of 7200 rpm, a 3.5" form factor, and a 256MB cache, providing users with ample storage capacity with data transfer speeds of up to 270 MB/s. The IronWolf Pro also has an MTBF rating of 2.5 million hours and a workload rate of up to 550TB per year. Seagate's AgileArray technology provides dual-plane balancing, time-limited error recovery (TLER), and rotational vibration (RV) sensors to deliver enhanced RAID performance. Included is a limited 3-year Data Recovery Service that helps you retrieve damaged data in the event of a mechanical error, accident, or natural disaster, and overall protection is provided by a limited 5-year warranty.
Store your data in the 1TB 870 EVO SATA III 2.5" Internal SSD from Samsung for quick access. It features sequential read speeds of up to 560 MB/s and sequential write speeds of up to 530 MB/s, making it ideal for storing and rendering large format files such as 4K video and 3D data. Moreover, it has a 2.5" form factor, which is compatible with a wide range of notebooks and desktop computers, and utilizes the SATA III interface. Also featured is 1GB of LPDDR4 cache memory, an MKX controller, 1XXL V-NAND 3-bit MLC flash memory, an MTBF of 1.5 million hours, and an endurance of up to 600TB. Protection is provided by a limited 5-year warranty, unless the max endurance rating is reached first.
Designed for use in 1-8 bay NAS environments within home, SOHO, and SMB environments, the 8TB IronWolf 7200 rpm SATA III 3.5" Internal NAS HDD from Seagate is built to withstand 24x7 operations, or 8760 hours per year. This 8TB drive has been equipped with a SATA III 6 Gb/s interface, a rotational speed of 7200 rpm, a 3.5" form factor, and a 256MB cache, providing users with an ample storage capacity and data transfer speeds of up to 210 MB/s. This IronWolf hard drive also has an MTBF rating of 1 million hours, 600,000 load/unload cycles, 1 in 1015 non-recoverable read errors per bits read, and a workload rate of up to 180TB per year.
The 4TB Red Plus 5400 rpm SATA III 3.5" Internal NAS HDD from WD is built to handle the workloads of RAID-optimized NAS systems with up to 8 drive bays, including home offices and power users, small to medium businesses, and consumer and commercial NAS systems. This 4TB drive operates using a SATA III 6 Gb/s interface, a 256MB cache, and a rotational speed of 5400 rpm, which all help to ensure uninterrupted data transfers with a rate of up to 180 MB/s. This drive also features high levels of reliability, with 600,000 load/unload cycles, < 1 in 1014 non-recoverable read errors per bits read, a workload rate of 180TB per year, dual-plane balance control technology, and a 1 million hours MTBF. WD's NASware helps increase system compatibility, allowing Red Pro drives to be more easily integrated with your existing network infrastructure, while noise and vibration protection is provided by Rotation Vibration (RV) sensors.
The 18TB Exos X18 7200 rpm SATA III 6 Gb/s 3.5" Internal HDD from Seagate is a high-performance, large-capacity drive designed for data storage. It's suitable for engineering workstations, network servers, mainframes, supercomputers, and other demanding tasks that require 24/7 operation. This 7200 rpm drive utilizes the SATA III 6 Gb/s interface for data transfer rates of up to 270 MB/s. Moreover, as a professional-grade drive, it has an MTBF rating of 2.5 million hours as well as built-in digital sensors to ensure optimal performance, PowerBalance for lower power consumption, and a helium seal for lower power, weight, and increased durability and leak protection.
Cut down system boot up and load times with the 1TB Crucial P3 NVMe PCIe 3.0 M.2 Internal SSD. Featuring Micron Advanced 176-layer 3D NAND technology with sequential read and write speeds of 3500 MB/s and 3000 MB/s, this internal solid-state drive is designed to quickly load demanding applications, large project files, and complex games.
The 18TB Purple Pro 7200 rpm SATA III 3.5" Internal Surveillance Hard Drive from WD is designed for high-end AI-enabled recorders, video analytics appliances, deep-learning servers and cloud solutions that can benefit from high-capacity storage with high performance and additional workload capability. With support for up to 64 high-definition surveillance cameras, this 8TB hard drive features AllFrame AI technology, which helps reduce frame loss, improve video playback, enables the recording of multiple streams per camera, and supports up to 32 AI streams per drive for deep learning analytics within the system.
Add up to 500GB of storage capacity to a notebook or desktop computer with the MX500 2.5" Internal SATA SSD from Crucial. This solid-state drive fits in the system's 2.5" drive bay and comes with a 7 to 9.5mm spacer for compatibility with bigger bays. Crucial has equipped the MX500 SSD with a SATA Interface, Silicon Motion SM2258 controller, and Micron 3D TLC NAND Flash technology to deliver up to 560 MB/s sequential reads and 510 MB/s sequential writes. For securing sensitive data, AES-256 encryption and Opal 2.0 are available. Additionally, included along with the drive is Acronis True Image software, which provides an easy-to-use backup solution.
Designed for NVR (network video recorders) and AI-enabled NVR systems, the 8TB SkyHawk AI 7200 rpm SATA III 3.5" Internal Surveillance HDD from Seagate is well-suited for units with 16 or more drive bays. Engineered for 24/7 workloads, or 8760 operational hours per year, this SkyHawk AI drive supports up to 64 HD cameras and 32 additional AI streams, or 16 AI channels. Seagate's ImagePerfect AI technology helps to deliver zero dropped frames, while high reliability is backed by a workload rate of 550TB per year. Additionally, SkyHawk Health Management helps protect your surveillance storage by focusing on prevention, intervention, and recovery options. Should you use this drive in a RAID, integrated RAID RapidRebuild technology helps provide faster volume rebuilds.
The 20TB Exos X20 7200 rpm SATA III 6 Gb/s 3.5" Internal HDD from Seagate is a high-performance, large-capacity drive designed for data storage. It's suitable for engineering workstations, network servers, mainframes, supercomputers, and other demanding tasks that require 24/7 operation. This 7200 rpm drive utilizes the SATA III 6 Gb/s interface for data transfer rates of up to 285 MB/s. Moreover, as a professional-grade drive, it has an MTBF rating of 2.5 million hours as well as built-in digital sensors to ensure optimal performance, PowerBalance for lower power consumption, and a helium seal for lower power, weight, and increased durability and leak protection.
Take your gaming and productions to the next level with the Western Digital 1TB WD_Black SN770 NVMe M.2 SSD. Whether you are amassing a library of your favorite titles or editing your gameplay, the SN770 offers ample storage with enhanced speeds designed to get you into games and applications quicker.
Designed to meet the reliability, endurance, and performance requirements of 24/7 storage in small- and medium-sized business storage systems, the 4TB HAT3300 Plus Series SATA III 3.5" Internal NAS HDD from Synology delivers NAS-class reliability to ensure consistent performance in high-uptime and multi-user environments. The HAT3300 Plus has passed 300,000 hours of testing, has a Mean Time to Failure (MTTF) rating of 1 million hours, and a yearly workload rating of 180TB. Also featured is a storage capacity of 4TB, a SATA III 6 Gb/s interface, a 256MB cache, and a rotational speed of 5400 rpm, all of which help to ensure uninterrupted data transfers with sustained speeds of up to 202 MB/s.
WD 10TB Purple Pro 7200 rpm SATA III 3.5" Internal Surveillance Hard Drive The 10TB Purple Pro 7200 rpm SATA III 3.5" Internal Surveillance Hard Drive from WD is designed for high-end AI-enabled recorders, video analytics appliances, deep-learning servers and cloud solutions that can benefit from high-capacity storage with high performance and additional workload capability. With support for up to 64 high-definition surveillance cameras, this 8TB hard drive features AllFrame AI technology, which helps reduce frame loss, improve video playback, enables the recording of multiple streams per camera, and supports up to 32 AI streams per drive for deep learning analytics within the system.
Designed for media storage, use as a boot drive, or as a replacement for an existing drive, the 500GB CS900 SATA III 2.5" Internal SSD from PNY Technologies allows users to store and access up to 500GB of data. It is equipped with a SATA III 6 Gb/s interface that is compatible with SATA II 3 Gb/s and fits into your system's 2.5" / 7mm drive bay, providing load and access times for files and programs that are faster than those of a traditional spinning hard drive. In terms of speed, this drive offers sequential write speeds of up to 500 MB/s and sequential read speeds of up to 550 MB/s. In addition to its enhanced data transfer rates, this drive also offers a life expectancy of 2 million hours MTBF, TRIM support (OS dependent), and S.M.A.R.T support.
