Road studs are commonly known as highway studs or railways studs or highway markers.Road studs are a type of traffic safety product fixed in the middle of lane lines or yellow double-line for, through its retro reflection, reminding drivers to drive their vehicles along with the lanes.
Features :-
~ 112L x 91W x 20H (mm);
~ Shank 55mm;
~ Load capacity up to 25 tons;
~ Highest reflectivity lens area 168 square millimeters;
~ High durability;
~ High impact resistance;
~ Grove bottom for better grip and easy installation;
Epoxy resin installation method is normally adopted generally for installation of road studs. Two component road stud epoxy adhesive is usually used. Part A and Part B should be mixed thoroughly. To avoid wastage do not mix more epoxy than what will be required in the next 25 minutes (i.e. start with 1 liter only). 8 to 10 studs can be installed per liter of epoxy.
Greetings! GETO always focusing on formwork and scaffolding system R&D and development, design, production, leasing, sale, renovation and technical services. Our scaffolding is known as GT-18 Integrated Attaching Lifting Scaffolding and it is suitable for high-rise and super-high-rise buildings with frame or shear wall structures. Through the application in different sites, it has been proved that its performance is excellent, safe, reliable, stable operation, economic and practical, which brings great convenience to the construction and production for most users.
Components: Lifting System, frame system, thunder protection system,anti fall and anti-tilt system and control system
Lifting System: Consists of slideway, lifting hanging bracket, lower hanger frame, electric chain hoist, and over hanger frame.
Frame System: Main component of attaching lifting scaffolding, and also the safe operation platform for constructors. The frame structure is mainly composed of Walkway plate, poling, Protective net, truss, turning plate etc.
Thunder Protection System: The system consists of air termination, grounding grid and grounding wire
Anti-falling, Anti-tilting System: The anti-falling and anti-tilting system is a supporting structure that is directly attached to the building structure and connected to the vertical main frame to withstand and transmit loads. With support, anti -fall, anti - capsize function.
Control System: To form the control system, some essential components are computer,mobile phone, tablet PC, remote controller, sensor main control box, sub-control box, cable line and loading sensor.
Greetings! GETO offers comprehensive formwork solutions for different situations, for example, basement floors, podium floors, typical floors, etc. With well-constructed panels and reasonably-arranged reinforcement systems, our products can control the deviation of flatness and perpendicularity to achieve the plastering-free concreting finish. GETO aluminium formwork can 100% turn your design into reality and achieve no-plastering concreting to lower your cost on building surface decoration. GETO also has developed four types of aluminium formwork systems, which are Flat-Tie System, Tie-Rod System, Timber & Aluminium Formwork System, and Aluminum Formwork with Precast Concrete System.
Application: Concrete casting / Building house
Reusable times: More than 300 times
Model Number:Aluminium alloy 6061-T6
After sale service: Online technical support, on-site installation, on-site training and inspection, free spare parts, return and replacement
Place of Origin:China
Characteristics: Large load capacity, light weight, high efficiency, low cost and long working life
Is a solvent base waterproofing liquid that is clear and colorless, totally transparent and penetrable. When applied on surface it will not change the color or texture of the surface. It provides UV and FUNGUS resistance and is self cleaning. Surfaces treated can be painted over with most high quality oil based and acrylic emulsion paints.
1 liter x 18 cans per carton box (36x36x26 cm,17 kg)
5 liter x 4 cans per carton box (37x37x24 cm, 18 kg)
Is a joint mortar developed for the purpose of providing a superior Polymer Modified Cement (PMC) Adhesive with exceptional bonding capabilities for tiles to tiles bonding, superior bonding to any lightweight concrete decorative products, patching of honeycombs, cracked and damaged concrete floor, columns, brickworks, and etc.
0.90 kg x 24 cans per carton box (42x32x23cm, 22kg).
Is a ready to use penetrating interior and exterior solvent based transparent, durable and glossy non yellowing surface protective coating, which provide for waterproof sealing, fungus free surfaces and enhance the appearances of natural stones, bricks, slate, cement substrates, tiles, woods, parquet floor, painted metal surfaces, plastic surface and is anti-slip. Protection against acidic rain or pollution.
1 liter x 18 can per carton box (36x36x26cm, 19kg) and
5 liter x 4 can per carton box (37x37x24cm, 20kg)
DESCRIPTION Sequoia 3000 Gloss Finish is a premium solvent based high gloss finish, it is an oil-modified alkyd enamel
paint. It is easy to apply and forms a smooth, tough paint
film which has excellent gloss, fungus resistance and
durability.
USAGE For decoration and protection. Suitable for all types of
interior and exterior metal and wood surfaces
BENEFITS High gloss and excellent gloss retention
Excellent gloss fastness
Excellent durability
Washable
PACK SIZE 1 litre, 5 litres
COLOUR RANGE Refer to Sequoia 3000 Gloss Finish colour chart
PERFORMANCE GUIDE
CHEMICAL RESISTANCE
Resistant to mild chemical fumes. Special paint systems
required if surface is subject to constant chemical attack
HEAT RESISTANCE
Generally resistant to heat up to 0c. Discolouration will
occur after a prolong time if surface is constantly heated
WATER RESISTANCE
Resistant to normal atmospheric humidity present. Will
withstand repeated washing. Not suitable for surface
immerse in water
THEORETICAL COVERAGE
16-18 meter2 /liter. Note: Surface coverage will alter depending on condition
of surface to be paint
PRE-APPLICATION
SURFACE PREPERATION Generally all surfaces to be coated must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the
surface with sand paper or wire-brush and clean of dust. For optimal performance, new galvanized surface should be cleaned and degreased to ensure good adhesion
PREVIOUSLY PAINTED SURFACEâ?¡All loose and flaking paint film must be removed. Surface must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the surface with sand paper or wire-brush and clean of dust.
RECOMMENDED PAINT SYSTEM
Types of Surface
Undercoat (1 coat) Finish (2 coats)
Wood REDWOOD white undercoat
Metal SEQUOIA
PROTECTIVE COATING OR NASA oxide
SEQUOIA 3000
GLOSS PAINT
PAINT APPLICATION THINNINGâ?¡ For normal use, thinning is not required. If required, add 1 part of white spirit (10%) to 10 part of paint. Note: Excessive thinning will affect the quality of the paint.
DRYTIME Touch dry : 2 hours
Hard dry/Recoat : 8 hours
CLEAN UP â?¡Clean all equipment with white spirit immediately afteruse. Allow empty container to dry prior to disposal.
PRODUCT DATA COMPOSITION â?¡Pigments: Lightfast organic pigment, lightfast inorganic pigment.
Blinder : Organic Alkyd
Solvent : White spirit
Lacqua is a Swiss Brand with high quality water, sourced from Italy. The brand was created by Martup GmbH, a startup incubator, with the aim of providing pure mountain water to the world.
Available in the following sizes and bottle types-
0.5L PET
0.66L PET
1.5L PET
0.5L GLASS
0.75L GLASS
