1) Aluminium Ingots SPECIFICATION: Various shape & Grades. Purity 96% - 99.7% Aluminium Alloy Ingots (ADC12, AC4, AC2B, LM6, LM24) 2) Zinc Ingots SPECIFICATION: Purity +/- 95% .Highly durable and good conductor of electricity. 3) Lead Ingots SPECIFICATION: Purity +/- 99.94 to 99.99%. QUANTITY: A: Trial order: 1 container B: Contract: Upon trial shipment (Monthly up to 10,000 MT with 11 Months contract) INSPECTION: SGS or equivalent inspection for Quality and Quantity of the commodity at loading place. PAYMENT TERMS: 100% LC or SBLC INCOTERMS: FOB/ CIF / CFR / Cash & Carry DESTINATION PORT: Upon Buyer's interest (ASWP)
Our company has 800,000 metric tons of pyrite resources per annum. S ~45-49%, Fe ~ 42%, SiO2 ~ 6%, Cu ~ 0.2%, As ~ 0.02%, Pb ~ 0.1%, Zn ~ 0.1%, C ~ 1.5%, F ~ 0.034%, Sn ~ 0.001%, H2O ~ 8%, Mesh between 50-20.
Low carbon crca grades Pure cold roll bundle sized in 12"x12" and 5"x12" packaging in pallet(3x3) weight for per-pallet 9.5 tonne to 11.5 tonne
We sell and export good quality Aluminum Ingots
We sell and export good quality Aluminum scrap materials
Product Application By the advanced impact extrusion technology, we can manufacture the products such as aluminum bottle, aluminum cover, aerosol can, collapsible tube.,etc These Products are widely used in cosmetics packaging, electronics, medical, food and automotive industries Product Features: a.Customized in Shape and Size at your choice; b.Good flexibility and tractility, corrosion proof well, and attractive appearance; c.Excellent Quality In accordance with European Standard EN570/573. Product Range: a.Product Specifications: Alloy Purity Hardness Thickness Diameter Tolerance 1070 99.70% 16-20 HB 2-30mm 6-140mm �±0.05mm Annealing temper is:450 to 480 centigrade, time is: 8 to 12 hours b. Chemical composition (%): Alloy Si Fe Cu Mn Mg Cr Ni Zn Ca V Ti 1070 0.25 0.25 0.04 0.03 0.03 - - 0.04 - 0.05 0.03 Other Min Al 0.03 99.7 Product Shape: Shape: Round, Oval, Column, Rectangle Domed , Conical Surface Technology Tumbling or Shot-Blasting Product Process: 1-1070 Aluminum ingot-Smelting This stage starts by loading furnaces F1th ,F2th with 30MT each of raw aluminum (alloy AA1070, purity 99,7% 2-Continuous casting and hot-cold rolling The melt is poured into the strip casting wheel, which rotates at a speed of 6 meters/min. A strip of 220 mm wide by 20 mm thick is formed. 3-Cold Lamination/Rolling which aloud a maximum tolerance 0,05 mm 4-Stamping/Punching This stage counts with four stamping presses, In this process we get about 50% of slugs for each Ton of punched strip. 5-Annealing Treatment With this we obtain a Brinell hardness of 16 a 21 HB. 6-Surface Finish Surface treatment is sand blasted, vibrated and tumbled 7-Final Inspection QC department(gauge,mechenical test, surface quality) 8-Selection and Packing Boxes are marked with customers information QC -Testing The quality policy of Nansen Industries is to establish implement and maintain an effective assurance system. Based on standard of EN570 and ISO 9001 with the full employees in the process of continuous quality improvement and quality assurance practices resulting in our customer satisfaction. The purpose of our quality system is to continuously improve the quality of our products, our services and productivity in order to achieve internal and external customer satisfaction.
Road studs are commonly known as highway studs or railways studs or highway markers.Road studs are a type of traffic safety product fixed in the middle of lane lines or yellow double-line for, through its retro reflection, reminding drivers to drive their vehicles along with the lanes. Features :- ~ Exceeds ASTM D4280, EN1463-1 of United Kingdom standard; ~ Polymethyl Methacrylate (PMMA) lens ensure highest reflectivity; ~ Economical and durable; ~ High load capacity up to 25 tons; ~ Reflect values of 279 mcd/lux; ~ Reflect range of 0 - 40 degree; ~ Weight approximate 300g; ~ Oil, heat and chemical resistant; ~ Easy to install; Epoxy resin installation method is normally adopted generally for installation of road studs. Two component road stud epoxy adhesive is usually used. Part A and Part B should be mixed thoroughly. To avoid wastage do not mix more epoxy than what will be required in the next 25 minutes (i.e. start with 1 liter only). 8 to 10 studs can be installed per liter of epoxy.
Road studs are commonly known as highway studs or railways studs or highway markers.Road studs are a type of traffic safety product fixed in the middle of lane lines or yellow double-line for, through its retro reflection, reminding drivers to drive their vehicles along with the lanes. Features :- ~ ASTM D2444 standard; ~ Highest reflectivity; ~ High durability; ~ High impact resistance; ~ 90L x 100W x 73H (mm); ~ Heat resistance 62.7 - 2.5 degree Celcius; ~ Easy to install; Aaluminium road stud with Double Amber reflector market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia.
-99% Pure Aluminium Foil with high reflectivity (>0.07) & low emissivity (
We are stocking good quality Aluminum Extrusion 6063 Scrap for sale and export
We are stocking good quality Aluminum Ingots for sale and export
We are stocking good quality Aluminum Scrap for sale and export
We supply a wide range of Aluminum Ingots that meet international standards and specifications.
We supply a wide range of Aluminum Scrap that meet international standards and specifications.
We are stocking good quality Aluminum Scrap for sale
We are stocking good quality Aluminum Ingots for sale
We are well known Dealer and supplier of good quality Aluminum Scrap and we have stock ready for sell and export
We are well known Dealer and supplier of good quality Aluminum Ingots and we have stock ready for sell and export
We are supplier and dealer of good quality Aluminum Scrap and we have available stock for sell in our warehouse
We are supplier and dealer of good quality Aluminum Ingots and we have available stock for sell in our warehouse
