Lithuanian Temperature Controllers Indicators Suppliers and Manufacturers

GSM security and control systems.

Electronic and autotransformer speed controllers for fans.

.Environmental consultancy and engineering, waste management and treatment consultancy, engineering and facilities design

GSM monitoring, home security, access control, GSM alarm, GSM thermostat, burglar alarm, house alarm, GSM monitoring and control system.

Honey that is subtle in flavor and provides a Vitamin C fix. Subtle in taste, can improve appetite, lower body temperature, reduce headache, and improve urinary excretion. This honey is recommended if suffering from bronchitis, laryngitis, gastritis, or a reduction in gastric acids.

Ash content for dry fuel, not more than %: norm 45, fact-7,41 Mass fraction of total sulphur in the dry state of the fuel, Not more than %: Norm - 3.0, Actual - 1.20 Mass fraction of chlorine in the dry state of the fuel, Not more than %: Norm - 0.4, Actual - 0.08 Mass fraction of arsenic in the dry state of fuel, Not more than%: Norm - 0.01, Actual - 0.0009 Ignition temperature (Celcius), not less (C) than : Norm - 120, Actual - 366 Self-ignition temperature (Celsius), not less (C) than : Norm - 50, Actual - 495

APPROVED, Filters non-oil based particulates, filtration efficiency ? 95%. Cup Shape or Vertical foldable both available, fit well with goggles or helmets. Adjustable nose clip providing more seal , less leakage. Exhalation valve reduce breathing resistance, and temperature build-up. Latexfree 4 ear elastic strap. Soft nose liner , comfortable and fit the face.

APPROVED, Filters non-oil based particulates, filtration efficiency ? 95%. Cup Shape or Vertical foldable both available, fit well with goggles or helmets. Adjustable nose clip providing more seal , less leakage. Exhalation valve reduce breathing resistance, and temperature build-up. Latexfree 4 ear elastic strap. Soft nose liner , comfortable and fit the face. Contact

UAB Smart Stata supplies natural sapropel organic fertilizers. Sapropel is a natural organic substance formed by the deposition of dying plants and microorganisms with limited access to oxygen formed over a thousand years, which is always found at the bottom of freshwater lakes. Promotes growth in natural ways, increases yield, strengthens plant immunity, promotes vegetation, develops root system. Product information - The SAPROPURE product line PLANT UP sapropel guarantees true fruit and vegetable flavors, zero nitrates and fertile soil. Main components: Agrochemical elements: organic nitrogen, potassium, phosphorus. Active substances: humates - salts, acids, humin, fulfata. Enzymes: catalase, peroxidase, reduction, protease. Phytohormones: auxin, cytokinin, gibberellin. Qualitative indices: glomalin, organic protein, organic fiber, carbohydrates, organic fats, reducing sugars. Amino acids: glutamine, tyrosine, tryptophan, leucine, alanine, glycine, histidine, serine, teronin, arginine and others. Vitamins: A (retinol), E (tocopherol), B1 (thiamine), B2 (riboflamin), B3 (PP nicotinic acid). B6 (pyrodoxine), B12 (kaynacobalamin), C (ascorbic dehydroascorboric acids). Additionally: carotene, xanophyll, chlorophyll. IMPORTANT: Parts vary depending on product concentration. PLANT UP 1L Liquid concentrated fertilizer for home growers Wholesale price: 9,42 EUR + VAT Suggested selling price: 15,70 EUR + VAT PLANT UP 5L Liquid concentrated fertilizer for home growers Wholesale price: 40,29 EUR + VAT Suggested selling price: 61,98 EUR + VAT PLANT UP 20L Liquid concentrated fertilizers for farm owners Wholesale price: 144,05 EUR + VAT Suggested selling price: 205,79 EUR + VAT PLANT UP 1000L Liquid concentrated fertilizers for farm owners Wholesale price: 5884,3 EUR + VAT Suggested selling price: 7355,37 EUR + VAT PLANT UP F 50L Organic friable concentrated sapropel fertilizer, 1 bag 50 L Wholesale price: 9,42 EUR + VAT Suggested selling price: 15,70 EUR + VAT PLANT UP F 2500L Organic friable concentrated sapropel fertilizer 1 PALLET 2500 L 1000 KG Wholesale price: 2500 L 299,00 EUR + VAT , buying min 1 ton. Wholesale price: 2500 L 222,00 EUR + VAT , buying min 22 tons. Wholesale price: 2500 L 190,00 EUR + VAT , buying min 110 tons. The offer is valid until the end of the 31h of June 2020; Payment within 1 working day from the date of invoice;

100% natural wheat straw, without any additives. Maximum absorbency – due to the larger surface area, they absorb more than 3 times faster than regular straw pellets, preventing Coccidiosis and ensuring a better effect on bacteria control. Odour control – binding the smell of ammoniac. Raw material storage is important: All our straw is stored under the roof all-year-round. The proper straw storage ensures we keep our raw straw dry, mould and dirt free. It enables us to produce high quality equine bedding pellets and straw pellets for other animal bedding. More information about our products and services: www.nordiceco.eu Regional Manager (UK) +44 7874 400 690 Regional Manager (Sweden) +46 812 410195 Regional Manager (Germany) +49 322 142 19985 Packaging: 1100 kg Big Bag – 22 Big Bags into the standard truck. 550 kg Big Bag – 44 Big Bags into the standard truck. 20 kg plastic bag – 50 small bags on one pallet, 24 tones into the standard truck. Different packaging is also available. Packages are completely customizable (labelling, size, material etc.) according to client needs.

100% natural rape straw, without any additives. Horses do not eat rapeseed-straw pellets. Maximum absorbency – they absorb more liquid and much faster than regular wheat-straw pellets, improving bacteria control. Odour control – binding the smell of ammoniac. Leave a summer rapeseed-field smell in the stable. Raw material storage is important: All our straw is stored under the roof all-year-round. The proper straw storage ensures we keep our raw straw dry, mould and dirt free. It enables us to produce high quality equine bedding pellets and straw pellets for other animal bedding. More information about our products and services: www.nordiceco.eu Regional Manager (UK) +44 7874 400 690 Regional Manager (Sweden) +46 812 410195 Regional Manager (Germany) +49 322 142 19985 Packaging: 1100 kg Big Bag – 22 Big Bags into the standard truck. 550 kg Big Bag – 44 Big Bags into the standard truck. 20 kg plastic bag – 50 small bags on one pallet, 24 tones into the standard truck. Different packaging is also available. Packages are completely customizable (labelling, size, material etc.) according to client needs.

FREEZE DRIED STRAWBERRIES POWDER. Shape: Powder Consistency: loose, dry; Taste and smell: Typical taste of strawberry, without foreign tastes Can make/prepare: 1kg, 5kg, 10kg packaging/bags also. DESCRIPTION OF PRODUCT: Product obtained by freeze drying process. Lyophilization is dehydration of the fruit by sublimation of ice - water to be passed directly from solid to vapor without the liquid phase. During this process, the product retains the characteristics nutritional and organoleptic parameters. Lyophilization (Freeze-drying) INGREDIENTS: Freeze dried strawberry 100% GM STATUS Product is GM free according to EC regulation 1829/2003 and EC regulation 1830/2003. CHEMICAL PLANT PROTECTION PRODUCTS According to current EU legal requirements- EC Regulation 396/2005. SHELF LIFE Shelf life in unopened packaging (polyethylene foil) is 12 months from the date of production. Shelf life in unopened packaging (doypack type packaging) is 24 months from the date of production. During delivery to the Client, the product must have min. 3/4 of shelf life. STORAGE CONDITIONS Keep closed tight in dry place at room temperature, in clean, dry, well-ventilated warehouses free from foreign odors and pests. Applies to powder. Before placing a finished product in magazine, half of the height of the pallet must be reduced in case of reducing the degree of flattening of the cartons. When storing the product, it is necessary to move the packages every 3 weeks, put the package upside down, and the package from the bottom to the top, to prevent the powder from caking. In case of noncompliance with the above requirements, complaints will not be taken into account. TRANSPORT CONDITIONS Vehicles must be covered, clean, dry and free of any foreign smell and pests and released for the transport of foodstuffs. PACKING Approved for contact with food, in accordance with applicable law. Direct packaging- tightly closed bags of polyethylene foil, marked with an external legible label, clean, firm, free from foreign odors and pests. Direct packaging- Doypack type packaging (PET 12/Al 8/PE80/M; PET12/Al 8/PE 80S/M; PET 12 met/ PE 100; PET12/r/Al9/PE8), marked with an external legible label, clean, firm, free from foreign odors and pests. Indirect packaging- cardboards wrapped in heat-shrinking foil or stretch foil, which protect the product against damage. QUALITY SYSTEMS The company has implemented HACCP and certified BRC system. COUNTRY OF ORIGIN Poland and other

FREEZE DRIED WILD STRAWBERRIES POWDER. Shape: Powder Consistency: loose, dry; Taste and smell: Typical taste of wild strawberry, without foreign tastes Can make/prepare: 1kg, 5kg, 10kg packaging/bags also. DESCRIPTION OF PRODUCT: Product obtained by freeze drying process. Lyophilization is dehydration of the fruit by sublimation of ice - water to be passed directly from solid to vapor without the liquid phase. During this process, the product retains the characteristics nutritional and organoleptic parameters. INGREDIENTS: Freeze dried wild strawberry 100% GM STATUS Product is GM â?? free â?? according to EC regulation 1829/2003 and EC regulation 1830/2003. CHEMICAL PLANT PROTECTION PRODUCTS According to current EU legal requirements- EC Regulation 396/2005. SHELF LIFE Shelf life in unopened packaging (polyethylene foil) is 12 months from the date of production. Shelf life in unopened packaging (doypack type packaging) is 24 months from the date of production. During delivery to the Client, the product must have min. 3/4 of shelf life. STORAGE CONDITIONS Keep closed tight in dry place at room temperature, in clean, dry, well-ventilated warehouses free from foreign odors and pests. Applies to powder. Before placing a finished product in magazine, half of the height of the pallet must be reduced in case of reducing the degree of flattening of the cartons. When storing the product, it is necessary to move the packages every 3 weeks, put the package upside down, and the package from the bottom to the top, to prevent the powder from caking. In case of noncompliance with the above requirements, complaints will not be taken into account. TRANSPORT CONDITIONS Vehicles must be covered, clean, dry and free of any foreign smell and pests and released for the transport of foodstuffs. PACKING Approved for contact with food, in accordance with applicable law. Direct packaging- tightly closed bags of polyethylene foil, marked with an external legible label, clean, firm, free from foreign odors and pests. Direct packaging- Doypack type packaging (PET 12/Al 8/PE80/M; PET12/Al 8/PE 80S/M; PET 12 met/ PE 100; PET12/r/Al9/PE8), marked with an external legible label, clean, firm, free from foreign odors and pests. Indirect packaging- cardboards wrapped in heat-shrinking foil or stretch foil, which protect the product against damage. QUALITY SYSTEMS The company has implemented HACCP and certified BRC system. COUNTRY OF ORIGIN Poland and other

Advantages of panel – frame houses: Our houses are ecologic and warm, assembled fast (within couple weeks). Mounting and assembling could be done in any season; there are minimal so called wet production processes. Fast mounting does not require temporary premises or big storage rooms on a site. There is a possibility to disassemble, which is important for temporary premises. The homes could be finished by the homeowners themselves. Elements (walls, floors and roof) of wooden panel house are prefabricated and preassembled from structural panels in our specialized workshops. It allows us to achieve high quality of work, because when the works are carried out inside of premises, elements of the house are affected by unfavourable weather, it is easier to control working conditions and there are more possibilities to use special equipment. Mounting: The houses are usually mounted straight from the trucks or containers by means of a crane, which is as a rule needed for the first 2-3 days or could be even a week, if the house is bigger. Average size building fits into two – three trucks. For the assembly of a house, modern sealing materials, galvanized fasteners and anchors (for anchoring to the foundation) are used. Our houses can be mounted and assembled by other subcontractors - construction companies or even homeowners themselves. Composition of external wall panels: As a standard, gypsum plasterboard, which has a fire factor of 1 hour, or wooden cladding planks and non-flammable PE vapour barrier film are installed from the inside of wall panel. Oriented strand board (OSB) or wooden cladding planks along with the wind protection film are installed from outside of wall panels. Mineral wool insulation is preinstalled between the vertical studs inside of panels. Other compositions of walls are also possible based upon requirements set by the country code and individual. Composition of internal wall panels – partitioning and load-bearing walls:; Timber frame is made from 95÷125 mm and 145÷195 mm thickness planed off studs respectively, mineral wool insulation is preinstalled for sound isolation. Panels are covered by plasterboards or other above mentioned materials. Floor – ceiling platform: Floor is produced from panels, which are made from 60x220 or 80x220 mm cross-section beams (depending upon planned static loads). On the upper side of the panel 22mm OSB is attached to improve the stiffness. In order to achieve minimal sound isolation cavities of the platform are filled by 100 mm insulation of mineral wool and full thickness is filled near external walls. Roof construction: Roof is produced out of joists and rafters, cross-sectional dimensions of which are usually 50÷60 x 200÷220 mm. Roof beams - joists are made from glued laminated/ glulam wooden beams based on static calculations. As per customer request, where possible, we try to preassemble roof panels including attic finishing materials and roof assembly including covering materials. Structural elements of the roof can be supplied loose or preassembled as roof panels. Thermal resistance of timber frame panel houses: Depending on the chosen materials, the resistance of walls is not less than 5.00m2 K/W and the resistance of roof is not less than 6.00 m2 K/W. Usually, additional finishing of outer walls is recommended for panel houses, therefore further thermal insulation is also possible. Special installations: Heating pipes, communication lines (low current - alarm systems, internet and television) and water supply and waste water systems are usually laid inside the flooring on the basis of chosen technical system. Panelled walls are designed and construed having in mind abovementioned systems and connections. These jobs are usually done by the local skilled and authorized personnel. Facade of the house: An individual outlook for the exterior of the house could be obtained by chosen materials. External decoration of panel walls is carried out using various materials: cladding, cement, stone plates, boards, brick finishing or plastering.Upon request of a customer house set could be delivered with preinstalled windows and entrance doors, garage doors, roofing cover, external staircase, perform their installation. Price: It depends upon area of external, internal walls, floor, construction of roof, balconies, thicknesses of elements and their finishing, number of elements, scope of a project. The price for a mirror or typical project is reduced. First, we estimate the price of basic structures of the house and at the moment varies from 260 EUR to 600 EUR per one square meter of living area. In order to have the price for the complete house, you have to know what kind of: floor cover; plumbing system; type of heating system; windows material, U-value, locks, colour, opening directions, etc.; type of wood for the external (outdoor use) staircase; roofing cover and rain drainage system; external and internal decoration / finishing materials such as plasterboards or wooden cladding, etc. Final price of individual project could be estimated knowing all the details and materials, in the best case when detailed working drawing are issued and based on the latest changes an updated specification – list of materials is issued.

Descaler for coffee machines. COMPOSITION: Citric acid, lactic acid. INSTRUCTIONS: 1) Empty the water tank and pour in 100ml of EcoDescaling Solution. 2) Dilute the100ml of descaler with water; the quantity is indicated in the coffee machine user manual (if there is no indication, use 1 litre of water). 3) Start the descaling cycle as explained in the manual. 4) Rinse the tank out several times with clean water, as explained in the machine instructions. WARNINGS: One dose (100ml) is always sufficient for perfect descaling. The descaler may damage delicate surfaces. If the product seeps out, rinse it off immediately. Read the instructions carefully and always keep them handy. Do not use other products that are not suitable for descaling.

Price - Euro 99.00 90 day warranty feature-icon Return guarantee feature-icon free delivery technical condition All functions work 100%. 90 day warranty. 14 day money back guarantee. SV03 General features Pump type: Manual feed Power supply: Battery Battery type: Li-Ion Charging time: 2.5 h Autonomous operation time (min.): Normal mode - 20 min., Max mode - 6 min. Automatic charging: none Suction power: 100 watts Power regulation: On the housing Cleaning Method of cleaning: Dry cleaning Dust collector type: Container Dust collector capacity: 0.38 l Dust collector full indicator: Yes Steam cleaning: None Designed for people with allergies: none Nozzles Nozzle for floors and carpets: Not available Slit nozzle: Available Mini Dust Nozzle: Available Electric nozzle: Available Charging station: Yes * The product may differ from the product shown in the photo. For example, color.

The disposable apron is resistant to bacteria and viruses, liquids, fats, oils, disinfectants and other chemicals. Flat packed for easy storage. Destination: Infection control, clothing for protection against a possible dirty. Application: hospitals, restaurants, barbecue, household, etc. Raw materials: LDPE. Parameters: Thickness: 20 microns. Height: 1500 mm. Width: 800 mm. Surface: smooth. Colour: clear.

Capacity from 1 000 till 60 000 bottles or cans/hour; Product:; beer, kvass, juice, wine, carbonated and non-carbonated drinks; Material: stainless steel AISI 304, AISI 316L, AISI 316Ti, AISI 321. Whole process of pasteurization is fully automatic; Registration of pasteurization parameters (temperature and time parameters); Water exchange system between heating and cooling zones; System of opening and fixing of the upper lids allows easier access and simplifies the cleaning; Active container feeding system; Overload protection system; System of collection and return of condensate; Effective and an independent spraying system in each zone; Automatic monitoring and adjustment of PU; Alarm system; Creation of recipes Remote access via modem and the data transfer (profibus, internet, etc.).