The Scope of Application The lights fit for ships with water dripping, water spattering, water coagulating and weather place, such as oven cabin, dry cabin, tunnel, pipeline and weather deck etc. Products Characteristic 1. CSD1 has water blow out prevention structure, phenolic plastics shell,...
Model# LT-WP01-90W
Wide input 100-277V AC or 200-480VAC
Power 90w
Up to 120 LPW to equal as 250W metal halide
Semi cut-off style of die-casting aluminum housing
Bronze powder-coating finish
Light transmission glass refractor, never become yellowish
MOQ 1pc
Lead time: 7-15 days based on QTY
ETL/cETL
DLC qualified
5 years warranty
Application
Obstruction light used in Tower Crane, Wind Turbine, High Mast, Metallurgies, Towers(Telecom, GSM, Electric), Smokestacks, High-rise Buildings and any other potentially hazardous obstructions within 45 meters to air traffic with a steady burning red safety light.
Main Parameter
1.Mode: CS-810
2.Standard: ICAO (Aerodromes Annex 14) Low-intensity Type A or Type B and FAA L-810
3.Light intensity: 32.5cd(Type B),10cd(Type A)
4.Flash rate: Steady-burning modeCustomized flashing mode)
5.Light source: LED
6.Service life of LED: 100,000hours
7.Operating voltage: AC110V to 240V (Customized DC24V,DC12V,DC48V)
8.Power consumption: 1W
9.Overall size(mm): 124 by 124 by 209
10.Installation size: 3/4inch
11.Vertical degree: 10°
12.Horizontal degree: 360°
13.Material:
-Housing: PC
-Base: die casting aluminum
14.Weight:1Kg
15.Emitting color: Aviation red
16.Ambient temperature: -40~+70
17.Wind load: 80m/s
18.Protection standard: IP65
Advantages
1.PC material with good impact protection strength, thermal stability, high transmittance.
2.Bird spike against bird drop.
3.International-advanced cold LED with low power consumption, high brightness and service life of light source reaching 100,000hours.
4.LED based on obstruction light last 15 times longer than traditional light source, incandescent light.
5.About 96% less power than 116W incandescent light.
6.Major maintenance cost saving,Surge protection device inside light.
7.Strong corrosion resistance, Shock and Vibrations protection and UV protection.
8.Dawn to Dusk operating: Built-in photocell can let light work automatically at night, closed during the day.
9.3/4inch installation size and small volume especially being suitable for telecom and flag-pole installation way.
10.There is one switch converting between Flashing mode and Steady-burning mode.
Obstruction light used in Tower Crane, Wind Turbine, High Mast, Metallurgies, Towers(Telecom, GSM, Electric), Smokestacks, High-rise Buildings and any other potentially hazardous obstructions within 45 meters to air traffic with a steady burning red safety light.
Main Parameter
1.Mode: CS-810/D
2.Standard: ICAO (Aerodromes Annex 14) Low-intensity Type A or Type B and FAA L-810
3.Light intensity: 32.5cd(Type B), 10cd(Type A)
4.Flash rate: Steady-burning modeCustomized flashing mode)
5.Working way of two lights:
-Two light flashing by Main(duty)-standby way, Two lights flashing at the same time
-Two light working by Main(duty)-standby way, Two lights working at the same time.(Steady-burning mode, two ways)
6.Light source: LED
7.Service life of LED: 100,000hours
8.Operating voltage: AC110V to 240V (Customized DC24V,DC12V,DC48V)
9.Power consumption: 3W
10.Overall size(mm): 295 by 130 by 337
11.Installation size: 78 by 78 by 9
12. Vertical degree: 10°
13. Horizontal degree: 360°
14. Material:
-Housing: PC
-Base: die casting aluminum
15.Weight: 2Kg
16.Emitting color: Aviation red
17.Ambient temperature: -40~+70
18.Wind load: 80m/s
19. Protection standard: IP65
This product depends on the good electrode eradiation to light in the low powder electric field. You donâ??t need the starter; it has a individual line and needs a ballast to use it normally. The tube start fast, convenient to mend, reliability increased, low incidence rate, long life. Apply to big scale factory, place with hazardous gas, console cabinet, airplane, ship and train.
Itâ??s made of blue and black glass tube, the phosphor can energy into electric arc 36nm UV-A long wave ultraviolet radiation. USES: industrial inspection and testing analysis, bank currency detector, mineralogy, criminology, food production, capture insects, etc.
Specially designed for the color comparison and rating of material, mainly used in these places which have strict requirement for color display, for examples: the printing plate-making workshopsamples show roomtextile millprinting and dyeing millprinting millplastic factorypaint plantInk factoryphotography, etc.
Technical parameters
The input voltage:AC90-245v/50-60hz
power:100-200w
High brightness LED light source:54*3w
18 18 three colors(red,green,blue)
18 four color(red,green,blue18 ,white 6)
Waterproof level:IP20 life:6-1,00000 hours
LED Angle:15°/25°/45°
Control:DMX512 master-slave control-since the go
Channel:8 channel(digital display)
Size:270*270*390mm
Net weight:4.3kg
Gross weight:4.5kg
Purpose:
UV Lamp tester adopt fluorescent lamp simulating the UV spectrum of sun shine, combined with temperature control, humidity system. It can simulates various of conditions such as temperature, shining strength and humidity to evaluate the breakage, peeling, pulverization, oxidization of the specimen.
Specification:
Model Z-UV
Temperature range RT+10~70
Humidity range 90% RH ~98% RH
Temperature unifirmity 2
Temperature fluctuation 2
Distance between lamps 702mm
Distance between specimen and lamp 502mm
Irradiance level 1.0W/m²
Lamps type UV-A, 40W / UV-B, 40W
UV light wavelength 315~400nm/280~315nm
Standard test shelf 75x300mm(3x12�)/23 or 100x300mm(4x12�)/15
Lamps amount 8 sets
Nozzle: 12 pieces
Light Size: W450xH260mm
Main unit dimension (WxDxH) 580x280x1450mm
Main unit weight 130 Kg
Power supply AC220V 50Hz 3KW or specified by user
10678 Lights Lamps Fittings Suppliers
Short on time? Let Lights Lamps Fittings sellers contact you.
