Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China
http://www.cn-solargardenlights.com
1.1.3 solar cell current position in the field of road lighting
In addition to people's pursuit of environmental protection, the ability to light street lamps and solar cells provide electrical power requirements determines the current status of solar lighting in the area. If we design, "city road lighting design standards" in the ¡éñ, ¡é¨° type of road lamps, since the electricity in daily 3-4.8KWH, solar power needs to reach more than 1KW. Let us not consider the cost of 1KW solar cells, only on solar cell design work area will make it difficult to carry out. Currently, the solar cell area of ??120W / square meter, the solar cell area of ??about nine square meters 1KW, such a large area is almost impossible in the like rod fixed. Further, in order to meet the city in terms of continuous rainy days to work, but also to expand the capacity of the battery several times, it also requires a lot of battery box.
Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China
http://www.cn-solargardenlights.com
However, there are many manufacturers of solar lights do not agree with the above conclusion. They think that ordinary street using low-efficiency light source, as long as the light changed to energy-saving lamps or LED light source can be with a small electric power reached the national standards required illuminance, or by changing the method of optical design, with a small you can get a high flux of illuminance, so with a small solar power solar lights can be done successfully. This view is clearly defective, illuminance is the luminous flux per unit area, how could there be no flux illumination? To say the least, if there is such a possibility, street lighting is long overdue that a source of innovation. Also the market LED luminous efficiency is still much lower than the conventional sodium or metal halide lamp, or even more than capable and energy-saving lamps.
Identified in the above analysis, we believe that solar lighting in the area is currently only suitable for manufacturing "city road lighting design standards" in the branch and for pedestrians and non-motorized traffic in the residential area roads and sidewalks street, that is, we usually say street lights and garden lights. Sub-distributors lights do very reluctantly.
2 local conditions install solar street city
As there is no pollution of solar green energy, very suitable for use in road lighting, particularly areas without power or laying power lines difficult places.
Currently plaguing solar street in one of the major urban development is positioning error, blindly using the main roads in the road of urban roads, downtown or commercial center, major transport hubs and other locations, with the result that despite efforts, Since solar energy can offer is not yet able to meet the fast road, trunk road and Welcome Road illumination requirements, application of sola
Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China
http://www.cn-solargardenlights.com
Solar photovoltaic lighting and mains complementary approach is a good way to solve ordinary solar photovoltaic lighting systems in urban areas there are mains application problems, especially in the original have been laying the city road lighting cables if you want to install solar lights, no not for a year and several consecutive rainy days are rare conditions and multiplied the capacity of batteries and solar cells, most of the time in a year it is a waste. In such cases, only we need to consider the longest hours of sunshine a year, and at night the lighting electricity demand required the shortest period of time on it, other energy, can supplement the mains. Thus, the solar cell efficiency to get the maximum use and minimum system cost battery capacity can be used a minimum, and solar street lighting system can achieve the highest reliability.
Therefore, the city had already laid on the road lighting cables if you want to install solar lights, solar photovoltaic lighting and mains complementary approach is a good way to local conditions.
Meanwhile, according to starting July 1, 2007 implementation of the "city road lighting design standards" CJJ45-2006 in Section 6.1.2
Enforce requirements article, the central square of the city must achieve dual power supply, solar photovoltaic power and mains complementary lighting can not say it is not a good way, in the city, some local dual power supply cost is very high solar photovoltaic power and mains complementary street lighting will significantly reduce the cost of dual power.
Feature:
Adjustable (height), Foldable, Adjustable (other), Convertible, Extendable, Modular, Revolving, Storage
General Use:
Home Furniture
Type:
Living Room Furniture, Flexible
Mail packing:
Y
Application:
Bathroom, Living Room, Bedroom, Other
Design Style:
Modern
Material:
Wood
Appearance:
Modern
Folded:
Yes
Inflatable:
NO
Wood Style:
Solid Wood, Solid Wood
Place of Origin:
Yalova, Turkey
Brand Name:
Fassley
Model Number:
light01
Color:
Brown
Usage:
Home Storge
Description:
High-quality Wooden Wall Shelf
Warrantly:
6 months
Meterial:
Wooden
Design:
Modern Deisgn
Choose a Perfect Lighting Fixture for your Home, hotels and other personal spaces. A perfect luminary can help light up every room. From wall lamps to ceiling pendants provide the perfect light for your home.
Linio Curve is a curved edge suspended luminaire with end caps composed of aluminium extrusion and PMMA diffuser with direct and indirect light distribution. Available in sizes of 600mm, 1200mm, 1800mm and 2400mm in length. The outer body can be powder coated as per requirements based on RAL standards. PMMA diffusers provide spotless and glare free light distribution.
Presenting the range of QAFASOUL Suspended Acrylic light fixture with light weight aluminum rod housing. Engineered to perfection, no welds and easy assembly
Aona slim is the slimmer version of the Aona with 40mm and 50mm height and diameter varying from 450mm to 2400mm. Composed of aluminium housing with PMMA and Stretch fabric diffusers which provide spotless and glare free light distribution. Powder coating options on the body available based on RAL. Luminaire can be suspended from the ceiling, mouted to the ceiling and recessed in the ceiling based on requirement. LED light source included. DALI dimmer option available.
Orbit is a suspended luminaire made of concrete material with wood top for enhanced look. The rough concrete texture along with wood makes it a stunning combination. Available in single size of 200mm in diameter. PMMA diffuser is used for spotless and glare free light distribution. Wood texture options are available.
Electrical
Input Voltage : 180 - 280 AC 50Hz
Driver Type : Constant Current Driver
Control : Switch / DALI / Analog
Connection : Plug-in Type Pre-wired
General Characteristics
Appliance Class : Class 2
Ingress Protection : IP40
Photobiological Safety : RG 0 - No Risk
Ambient Temperature : 0 to +50C
Luminaire
Housing Material : Concrete
Environment : Indoor
Mounting : Suspended
Light Distribution : Direct
Body Finish : Concrete & wood
Optics : PMMA Diffuser
Driver Mount : Inside Canopy Cup
Thermal Management : Passive Cooling
Light Source : LED
Medium Power LED
Binning : 3 Step MacAdam
Luminous Efficacy : 95 Lm/W
Color Temperature : 2700K / 3000K / 4000K / 5700K / 6500K
CRI : 80 (Standard) 90 (Optional) Tunable LED (Optional)
Argile is a suspended luminaire made of clay available in 2 sizes of 200mm and 300mm in diameter. The fixture houses an LED bulb (LED module option also available) and is suspended from the ceiling using canopy cup and wire. Color options are available based on RAL.
Argile is a suspended luminaire made of clay available in 2 sizes of 200mm and 300mm in diameter. The fixture houses an LED bulb (LED module option also available) and is suspended from the ceiling using canopy cup and wire. Color options are available based on RAL.
Terra is a suspended luminaire made of clay which houses an LED bulb (LED module option also available) and is suspended from the ceiling using canopy cup and wire. The fixture is available in 2 sizes of 175mm and 260mm in height. Color options are available based on RAL.
Terra is a suspended luminaire made of clay which houses an LED bulb (LED module option also available) and is suspended from the ceiling using canopy cup and wire. The fixture is available in 2 sizes of 200mm and 300mm in diameter. Color options are available based on RAL.
KC Certification Type: Yes
Rated voltage: AC220 / 60Hz / Power consumption: 1W
Size: diameter 110 length 180
Year of manufacture:2021.02
Manufacturer (Import): KTP Co., Ltd.
Patented fine dust removal lamp
KTPC Air Lamp 101 Wood Stand Set
KTPC Air Lamp 101 + Wood Stand
[ Location ]
It can also be used as an interior accessory with a sensual design!
Indoor space anytime, anywhere!
Schools, academies, hospitals, PC rooms, restaurants,
Cafe, general work, home and more!
â??
Clean and healthy indoor air purification!
Virus sterilization without filter replacement + fine dust removal + odor and cigarette odor removal
Indoor space anytime, anywhere
Air sterilization purification lighting KTPC air lamp 101
Experience the fresh air!
[Various Certificates]
A certified product that purifies air with a sterilization rate of 88.2% of airborne viruses!
By maximizing the discharge of electrons with negative polarity, electrons with strong energy destroy the cell membrane of the virus and kill it.
[ effect ]
Through the Korea Test Institute of Industrial Technology, the result of the space sterilizer for 30 minutes was 88.2%, and the sterilization of various viruses and Cardida mold was recognized overseas.
As a result of measuring the ability to remove fine dust for 2 hours in a 30 cubic meter chamber, the removal rate of 91.3% was measured.
cigarette odor removal
With 70% ammonia removal rate and 80% formaldehyde, it can remove the smell of cigarettes in the house, pleasant smells even when ventilated every hour, food waste smells, fishy fish after cooking, oil smells, sick house syndrome, etc.
In addition, the amount of negative ions generated is about 4 times that of Niagara Falls, and it does not generate ozone at 0%, so the technology of air lamps is that powerful electronic energy is not generated while harming the human body. Therefore, it is an air sterilizer that creates a comfortable space when used in places with a lot of smell, restaurants, hospitals, schools, etc.
Invisible fine dust, viruses, and even if you take good care of it, the smell of the bathroom and kitchen can be helped by turning on the pretty and soft lighting.
NEW Designed Multimedia Portable Solar Home Lamp product.
- Torch
- Main lamp
- Bluetooth Speaker
- USB and T/F card player
- Solar charging
- Phone charging
- LED bulbs
Hollow cathode lamp (HCL) is a special light source that generates characteristic atomic emission lines from a specific element, or multiple elements, of interest for Atomic Absorption Spectrophotometer ( AAS )
We have single element and multiple elements. None coded.
We also supply coded lamps. Used for Agilent and Thermo
Our lamps use the-state-of-art technology and using advanced vacuum process equipment in the manufacturing process. Each HCL is capable of producing highly stable and intensive emissions. Our lamps are compatible to all modern domestic and foreign made atomic absorption spectrophotometers (AAS) and atomic fluorescence spectrophotometers (AFS).
1.5 inch(37mm) lamps work with mostly brands AAS such as Varian, Hitachi, shimadzu etc.
2.0 inch(50mm) lamps a littler larger, especially work with Perkin Elemer brand AAS.
Our lamps mostly advantages are: longer lifetime(>5000 hours for mostly elements)
High intensity and low noisy.
Technical Specifications
1. Starting Voltage: â?¤350V (compatible to all commercial AAS systems)
2. Background intensity : The background intensity near the main analytical line is less than 1% of the intensity of the analytical line.
3. Warm-up time:
10508 Lights Lamps Fittings Suppliers
Short on time? Let Lights Lamps Fittings sellers contact you.
