* 2048 dmx channels, dmx512/1990 standard, output port with optical isolated.
* up to 300 intelligent fixtures or 300 dimmer may be connected.
* up to 42 channels each fixture. Fixture library mode, ¡¡ãpearl¡¡à fixture library compatible.
* 600 playback program, 200 group, 210 preset, 100 scene-snapshots.
* 100 scene-snapshots can be directly used keys running, flash or latch.
* with attribute fader of fixture (including dimmer, shutter, magenta, yellow and cyan). Used to quickly control the led x 170mm / 14.5kg
* packaging volume / gross weight¡êo 930mm x 650mm x 310mm / 21kg
We have over 150, 000 pieces of coating experience on various kinds of reflector including down lights, direct and indirect lighting fixtures, led reflectors, induction lighting reflectors, high bay reflectors, agricultural lightings and even glass bricks, ceilings, clothes and plastic panels.
Technical description: luminaire consists from body, basic plate and flange
With protective glass. Body and flange are castings from grey cast iron treated
With polyester powder paint. Steel pendant with eye o 18 mm is fixed to the
Upper part. Connecting area (increased safety „d“), with connecting clamps
And 2 cable glands, is placed on the side of luminaire. Flange cable glands
No. 3-99.5747/1 from grey cast iron are designed for cable o 10 - 16 mm (gland
No. 3-99.6170/1 for cable o 16 - 20 mm). Area is enclosed with cover from
Grey cast iron. Steel basic plate with electric parts and reflector is fixed in the
Body. Flange with glass cover is screwed in the body and secured with locking
Screw and silicon sealing against unlocking; thread shapes a rift of flameproof
Enclosure „d“. Protective hardened glass is resistant against mech. Shock min.
7 j and is fixed in the flange, the connection is filled with a polyurethan putty.
A steel hinge is fixed to the flange as the mobile one and enables to hang
Up the flange during mounting or dismounting. Steel parts are galvanized
And chromated. Luminaire is equipped with protective guard from galvanized
Steel wire. Max. Section of connecting conductors 4 mm2. Three-pole connecting
Terminal block enables interchanging 2 phases (4-core cable). Luminaire
Is equipped with 2 inner and 1 outer earthing clamps for conductive connection.
Luminaire is designed as the through-way one, when used as end piece, there is
Necessary to use blinding plug (optionally on order). Packing carton is filled with
Polyurethane foam instapak.
Luminous sources:
Hwl160 w e27, dulux d26 w g24d-3, bulb100w/220 e27, nav-e 110 w e27, hql125 w e27, nav-e 50/l 50 w e27, hql 80 w e27, clas 200 w e27, master pl e 23 w e27 and next
2G Ex de IIC T4-T6 Gb
II 2G Ex de IIC T4-T6 Gb
II 2D Ex t IIIC T max.surf Db
Luminaire consists of body, basic plate and
flange with protective glass. Body and flange are made of AlSi alloy
treated with polyester powder paint. Luminaire can be suspended
by the help of steel pendant with eye o 18 mm. The connecting area
(increased safety „e“) is placed on the side of the body and equipped
with connecting clamps and 2 cable glands HSK-K-Ex M25x1.5 for cables
o 9-16 mm. Area is enclosed with cover and sealed with silicon. There is
aluminium basic plate with electro-module mounted inside the
luminaire. Electro-module consists of 20 x LED CREE XP-G (luminous
flux 4000 lm, lumen per watt 88 lm/W, colour temperature 3700-5000,
Colour Rendering Index ~80, guaranteed life-time min. 50.000 hrs.) and
cooling unit. Input of the luminaire is adjustable (45W/22,5W) by changing
output current of the LED driver 700mA/350mA. Flange with protective
glass is screwed in the body and locked with securing screw; thread
shapes a rift of flameproof enclosure „d“. Protective hardened glass is
resistant against mech. shock min. 7 J and is fixed in the flange; the connection
is filled with polyurethane putty. The mobile steel hinge is fixed to
the flange and enables to hang up the flange during mounting and dismounting. Steel parts are galva-nized and chromated. Max. section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamp for conductive connection. Luminaire is designed as through-way one, when used as the end piece there is necessary to substitute one cable gland with blinding screw V-Ex or to blind one unused cable gland with blinding plug HSK-V-Ex. The blinding parts can be delivered on order optionally. Versions K are equipped with protective guard from steel wire. Packing carton is filled with sealing polyurethane foam Instapak.
luminous sources:
EcoClasik 140W E27, CLAS 200W E27, DULUX D26 W G24d-3, Bulb100W/220 E27, NAV-E 110 W E27, HQL125 W E27, NAV-E 50/l 50 W E27, HQL 80 W E27, Master PL E 23 W E27 and next.
I m2 ex d i, ii 2gd ex d td a iib t3-t4t tmax. Surf. Ip 65 ex.
Technical description: luminaire consists from body, basic plate and
Flange with protective glass. Body and flange are castings from grey cast
Iron treated with polyester powder paint. Luminaire can be suspended
By the steel pendant with 2 eyes o 18 mm on the upper part of the
Body. Connecting area (increased safety „d“), with connecting clamps and
2 cable glands, is placed on the side of luminaire. Flange cable glands
No. 3-99.5747/1 from grey cast iron are designed for cable o 10 - 16
Mm (no. 3-99.6170/1 for o 16 – 20 mm optionally). Area is enclosed
With cover from grey cast iron. Steel basic plate with electric parts
And reflector is fixed in the body. Flange with glass cover is screwed
In the body and secured with locking screw and silicon sealing
Against unlocking, thread shapes a rift of flameproof enclosure „d“.
Protective hardened glass resistant against mech. Shock min. 7 j is
Fixed to the flange, the connection is filled with polyurethane putty.
A steel hinge is fixed to the flange as the mobile one and enables to
Hang the flange during mounting or dismounting. Steel parts are
Galvanized and chromated. Luminaire is equipped with protective guard from steel wire. Max. Section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases. Luminaire is equipped with 2 inner and 1 outer earthing clamps for conducting connection. Luminaire is designed as the through-way one for 4-core cable; when used as the end piece, there is necessary to use blinding plug (optionally on order). Packing carton is filled with polyurethane foam instapak.
Luminous sources:
Spc 300 and 500w, with ballast box hql 250w, 400w, nav-e 210, 350w
Carton (mm/pcs) 560x300x30mm, weight 24 kg/pc
11071 Lights Lamps Fittings Suppliers
Short on time? Let Lights Lamps Fittings sellers contact you.
Luminaire consists of body, basic plate and
Flange with protective glass. Body and flange are made of alsi alloy
Treated with polyester powder paint. Luminaire can be suspended
By the help of steel pendant with eye o 18 mm. The connecting area
(increased safety „e“) is placed on the side of the body and equipped
With connecting clamps and 2 cable glands hsk-k-ex m25x1.5 for cables
O 9-16 mm. Area is enclosed with cover and sealed with silicon. There is
Aluminium basic plate with electro-module mounted inside the
Luminaire. Electro-module consists of 20 x led cree xp-g (luminous
Flux 4000 lm, lumen per watt 88 lm/w, colour temperature 3700-5000,
Colour rendering index ~80, guaranteed life-time min. 50.000 hrs.) and
Cooling unit. Input of the luminaire is adjustable (45w/22, 5w) by changing
Output current of the led driver 700ma/350ma. Flange with protective
Glass is screwed in the body and locked with securing screw; thread
Shapes a rift of flameproof enclosure „d“. Protective hardened glass is
Resistant against mech. Shock min. 7 j and is fixed in the flange; the connection
Is filled with polyurethane putty. The mobile steel hinge is fixed to
The flange and enables to hang up the flange during mounting and dismounting. Steel parts are galva-nized and chromated. Max. Section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamp for conductive connection. Luminaire is designed as through-way one, when used as the end piece there is necessary to substitute one cable gland with blinding screw v-ex or to blind one unused cable gland with blinding plug hsk-v-ex. The blinding parts can be delivered on order optionally. Versions k are equipped with protective guard from steel wire. Packing carton is filled with sealing polyurethane foam instapak.
Material:crystal, iron
Light source:g9 33w
Color: chrome
Voltage available:230v
Place of origin:guangdong, china(mainland)
Payment:t/t, 30% in advance
Loading port:yantian port
Home decoration
In 1978, great creator enterprise co was established in taiwan.In 1996 , wehad found a 300 peoples factory in jinyuan 3rd rd., xinqiao 3th industrial park, shajing town, bao'andistrict shenzhen guangdong china.
Our company designs and produces decorative items with polyresin. Ourproducts are covered europe, the united states, canada and australia as well. We provide good quality andprompt delivery, which are identified with our customers all over the world.
Our products including table lamp, homedecoration, candle holder, and led decoration lamp.
Brand: UHT
Product No. : UHT-A100
Product size: 300*220*55 mm
Input Voltage: AC100V- 240V
Single LED watt: 3W
LED numbers: 24pcs
LED Chip : Bridgelux or Cree
Control type : Automatic Remote or manual
Control Channels : 1,2,3 or 4 Channels available
Certification: CE RoHs
