HACT series provide precision measurement for energy monitoring applications to sensing power loading equipment without interrupting the lines. It has been specifically designed to be easy to open and yet maintain the accuracy required for intelligent meters, quick to fit around cables.
KCT-23 clamp on current transformer has been designed to be circular and for specific occasions, clip-on design could be installed without opening any cable or bus-bar circuit. Its capacity becomes bigger compared with KCT, SCT series.
As a specialist of led high bay lights for Garage, Factory, Warehouse, Badminton court and Underground Car Parking Lot etc. A2102 LED Linear High bay adopts super bright qualified LED as light source. It is stable, long life and no UV & IR emission. The special designed 6063 aluminum housing is stylish and fashionable with excellent heat. 200W led Linear highbay light can replace the traditional 400W led High bay light.
1.Led: 6*12w 4 in 1 rgbw osram+12*6*5050smd 3 in 1 rgb 2.Voltage: ac100-230v, 50/60hz 3.Power: 90w 4.Operation: auto, dmx512, sound, master/slave 5.Channel:8/21/25/69 ch 6.560°pan, infinite tilt 7.Beam angle: 10° 8.Smooth electronic dimming: 0-100% 9.Housing: plastic 10.N.W: 5.7 kg -
Metal halide (hid) lamps produce an intense bluish-white light, at a colour temperature of 5000-6500°k similar to sunlight, from an arc discharge between electrodes within a quartz capsule filled with special chemicals and are one of the most efficient ways of lighting large areas. The compact nature of the arc makes it easy to focus the light on a specific area. Plants grow well with compact growth under this light, but it lacks the red required for flowering. Lamps producing an enhanced orange-red output similar to a 3000°k source are available. Special starter circuits are required. Check that lamps will operate in a horizonal position if this is required.
The ceramic metal halide is a variation of the metal-halide lamp which is itself a variation of the old (high-pressure) mercury-vapor lamp. A cmh uses ceramic instead of quartz like a traditional metal halide lamp. Ceramic arc tubes allow higher arc tube temperatures, which some manufacturers claim results in better efficacy, color rendering, and color stability. The discharge is contained in a ceramic tube, usually made of sintered alumina, similar to what has been used in the high pressure sodium lamp. During operation, the temperature of this ceramic tube can exceed 1200 kelvins. The ceramic tube is filled with mercury, argon and metal-halide salts. Because of the high wall temperature, the metal halide salts are partly vaporized. Inside the hot plasma, these salts are dissociated into metallic atoms and iodine.
High pressure sodium lamps produce an intense pinkish-white light with a colour temperature of 2050°k from an arc discharge in high pressure sodium vapour and are an efficient way of lighting large areas. Succulent plants grow well under this light, but the colour cast may reduce acceptability for decorative illumination. The standard lamps are said to encourage production of flowers and fruit. Versions producing more blue light are available to promote compact vegetative growth, but this is not needed if the lamps are used to augment natural daylight which provides sufficient blue light.. Special starter circuits are required. Check that lamps will operate in a horizonal position if this is required
copper or black.
Name: Spot Light Light Source: LED Size: D138*186*H200MM Power: 12*1W Voltage: AC85-265V Voltage: AC85-265V CT: 3000/4000/6000K IP65 Material: Aluminum Color: Sand black/Sand white/Sand grey
1. lighting products: * indoor luminaires (including led bulb, led tube, led panel, led slim panel, led batten, led ceiling, led cross and linear light, led high bay, led parking, led downlight, led track light); * outdoor luminaires (including led flood light, led solar flood light, led street light, led solar street light.) * led grow lights (a variety of professional grow lights for dragon fruit, chrysanthemum, medicinal plants, ginseng, tomatoes, strawberries, grapes, watermelons, cantaloupe, bell peppers, orchids, vegetables, algae, etc.); * fishing lights (including on boat lights and underwater lights); 2. kitchenware products: vacuum flask, water bottle, electric kettle; electric blender, rice cooker, glass liner and accessories..Manufacturing, export and import, transport, and odm/oem services for all of the products.
Double Tube Batten Light Emergency Vapor Tight LED Tueb Light No-corrosion bridge wiring designed LED Batten Tube Light Fixture This Double Tube Batten Light adopts SMD2835 chips, can achieve higher lumen out put. The tubes of this emergency tube light fixture adopts bridge wiring design, no need to consider the power direction of the tube. It's easy for installation of the Double Tube Batten Light. Besides, the huge terminal of the tube light fixture is easy for wiring. This vapor tight tube batten light adopts high-grade PC base and milky PC diffuser housing, good quality seal for better waterproof. This vapor tight tube batten light can be widely used in tunnel, Rail-way or Metro station, Supermarket, stair well, corridor, evacuation passage especially parking lots, electrical room, ships and other basements. Lamp Luminous Efficiency(lm/w): 120 Warranty(Year): 3-Year Type : LED triproof tube light fixture Application: Office, Warehouse, Garage, Factory Lighting solutions service: Lighting and circuitry design, DIALux evo layout, Agi32 layout Model Number: ZL-PTBLP44-5FT-CE Color Temperature(CCT) : 5500K Input Voltage(V): AC 110 or 230V( �± 10%) Color Rendering Index(Ra): 80 Support Dimmer: NO Lifespan (hours): 50000 Working Time (hours): 50000 Length: 5ft IP Rate: IP 65 Beam angle: 120 Degree Material: PC + PC Wattage: 2*22w
The ex-factory price is 200-300 US dollars. Does not include international shipping Only accept wire transfer 100% payment
GENUINE T5 TFL GERMICIDAL UVC RADIATOR AVS 220VOLT 20WATT POWER CIRCUIT CONSTANT 254NM AND 2500MW OF UVC POWER OUTPUT SPECIAL UVC REFLECTING ALUMINIUM ALLOY REFLECTOR MADE WITH LOVE IN INDIA
Description: Light and Compact welded ISUP fits different needs. The small packing size takes off the heaviness of conventional ISUP. Rigid-Inflatable-Compact! Smaller and more portable! Compact iSUPs are measured not by their inflated size but by the entire length and weight of the gear when deflated and put into its transportation bag. Before folding, compact iSUPs typically fold in half down the midline, enabling them to fit into a backpack-style bag roughly half the size of a conventional iSUP bag. To help lighten the weight of the board, compact iSUPs are also manufactured from more premium, lightweight materials. Accessories are also modified to fit better in these smaller bags. Materials: Board: Drop stitch material Sidewall: PVC tarpaulin material EVA Info: Length Overall: 10'/305cm Width Overall: 33"/84cm Height: 6"/15cm Weight: 23.1lbs/10.5kg Max. No. Passengers: 1 Max. Load: 286lbs/130kg No. of Chambers: 1 Welding Tape: yes Fins: 2 D-rings: 7 Recommended Pressure(PSI): 15 Packmass(CM): 63*33*30 Equipment: Backpack, SUP Paddle, Leash, Fin, High-pressure hand pump, Repair kit, Owners manual, Box
Lighting & Fixtures
Model number: x-280a 10r 280w 3in1 wash light led spot moving head with dmx concert light We produce dmx led moving head spot light. We devoted ourselves to stage special effect equipment for many years, covering most of europe and the america market. We are expecting become your long-term partner in china. Specification of the 10r 280w 3in1 wash light led spot moving head with dmx concert light: Power consumption: 470w Power supply: ac 100-240v 50/60hz Light source: 280w 10r lamp Average lifespan: 2200hrs Color wheel: 13 dichroic filters + white Gobo wheel: 9 bidirectional and indexable gobos (outside diameter: 15, 4 mm, image diameter: 13 mm) static gobo wheel with 14 fixed gobos, at variable rotation Prism 1: 8-facet circular prism rotating in both directions at different speeds Prism 2: 6-facet linear prism rotating in both directions at different speeds Zoom: parallel beam angel 2.5â°-20 change Wash effect: adjustable wash effects angle Product features of the 10r 280w 3in1 wash light led spot moving head with dmx concert light: 1. This newest style 280 3in1 disco lights chinese has novel design and compact structure can be as a very professional moving head light 2. It has small beam angle, bean angle scale freely, has multistage beam angle change effect. 3. It has high brightness, downy lighting, and professional linear focus. 4. This new technology fixture even travels efficiently in a case of 4 and will cover all your needs beam, spot, wash
Working voltage: 220v-240v 4.5/9UF IP rating: IP65 Power: 1*18W Features: 1) Material: PC/ABS /PMMA or according to your requirement. 2) They are very waterproof, dustproof and antifouling 3) Suit both indoor and outdoor us 4) PC clips& stainless clip to ensure electricity safety 5) Easy and quick to installation under ceiling or on surface 6) Prismatic diffuser design for even light, efficient usage and good dazzle resistant effect. 7) Easy and fast ceiling installation 8) Curve corners and edges for stylish appearance 9) Integral and smooth housing for easy cleaning
Working voltage: 220v-240v IP rating: IP65 Power: 2*18W Features: 1) Material: PC/ABS /PMMA or according to your requirement. 2) They are very waterproof, dustproof and antifouling 3) Suit both indoor and outdoor us 4) PC clips& stainless clip to ensure electricity safety 5) Easy and quick to installation under ceiling or on surface 6) Prismatic diffuser design for even light, efficient usage and good dazzle resistant effect. 7) Easy and fast ceiling installation 8) Curve corners and edges for stylish appearance 9) Integral and smooth housing for easy cleaning
Working voltage: 220v-240v 4.5/9UF IP rating: IP65 Power: 1*18W Features: 1) Material: PC/ABS /PMMA or according to your requirement. 2) They are very waterproof, dustproof and antifouling 3) Suit both indoor and outdoor us 4) PC clips& stainless clip to ensure electricity safety 5) Easy and quick to installation under ceiling or on surface 6) Prismatic diffuser design for even light, efficient usage and good dazzle resistant effect. 7) Easy and fast ceiling installation 8) Curve corners and edges for a stylish appearance 9) Integral and smooth housing for easy cleaning pass CCC CE Roth Tuv
1.Product Name: H4 P45T ring 2.Product Type: Philips H4 P45T ring 3.Material: SUS 430 4.Usage: R2 lamp base 5.Product Dimension: Height: Max 9.5mm Outside Diameter: 47.2±0.2mm Inside Diameter: 22.3±0.05mm Diameter of deep drawn: 44.8+0.2mm Product thickness: 0.3mm 6.Product specification: Four welding pins, customized for Philips lighting Deep drawn stamping process, fully automatic line It is assembled with R2 base. 7.Quality: Using VDA6.3 Standard by Philips 8.Certification: IATF 16949 9.Packaging: 2000 pcs per carton. FAQ: 1.How do you produce this product, progressive die or simple mould? We use progressive die. 2.Do you make all moulds by yourself? Yes, all moulds are designed and made by our own technical team. 3.Does this product only match R2 base? It can be assembled with R2 base and H4 base. About us: : Invitech-Professional supplier providing precision progressive die stamping parts and compression molding parts. Global leader of H4 base, H7 base. We are committed to providing precision progressive die stamping and plastic components to our top customers in a wide range of industries around the world. We will provide you with comprehensive consulting services and customized development according to your needs. We look forward to further cooperation with you.
