Msl-k112w, 112w, 112pcsx1w, >110lm/w bridgelux LED, >11200lm, 668*308*110mm. Depends on which mode you choose. One carton contain one light.
Range :80W ~ 210; Entire lamp luminious >100lm/W; TJ:< 65 degree; Working tep: -40~50; Ip grade :IP 65/67. Dimension:1059mm x 420 x 104mm; 10.5~11kg.
Product Name: LED Street Light--------30W to 260W Model No. SS-EL03-----SS-EL26 General Parameters Rated Power 30W-260W Working Volatge at AC90~265V (50/60Hz) or DC12 as required Frequency Range 50/60Hz Light & Color Light Efficiency 85lm/W Color Tempreture 5500-6300K COMMODITY NAME ITEM NO RATED POWER (W) MODEL INTERFACE LIGHT LLUMINATION LED STREET LIGHT SS-EL03 30 C/Y ¦µ40 2300-2800 SS-EL05 50 C/Y ¦µ60 2900-3700 SS-EL08 80 C/Y ¦µ60 4400-6400 SS-EL10 100 C/Y ¦µ60 5300-8100 SS-EL12 120 C/2C ¦µ60 6700¡ª10500 SS-EL15 150 C/2C ¦µ60 8800¡ª12000 SS-EL18 180 C/2C ¦µ60 10500¡ª14000 SS-EL20 200 C/2C ¦µ60 11000¡ª16000 SS-EL26 260 Y ¦µ60 16000-18000 Note: Color tempreture can be adjustable.
Powerful and safe - manufactured in Germany. Optionally with following light sources: 1) fluorescent lamp 15W - 900 lumen. Lifetime 8000 h, white light. The brightness is similar to 75w halogen light. 2) or fluorescent lamp 18W - 1200 lumen, Lifetime 12000 h, white light. The brightness is similar to 90w halogen light. 3) or with power LED lamp 15W - 1200 Lumen, Lifetime 40000 h, white light. The brightness is similar to 90w halogen light. 4) or sodium low pressure lamp LPS 18W - 1770 lumen. Lifetime 18000 h, yellow light. The brightness is similar to 120w halogen light. Solar Panel: 75W / 100W / 120W mono crystalline silicon (protecting glass, hail-proof) aprx. 25 years life duration. This modern module technology has a high degree of efficieny and allows charging also at cloudy weather. Solar battery: 12V maintenance-free power gel accumulator 12 volt. Life time: 5-8 years. Functions well under low temperature. Control: Microprocessor for automatic lamp start by light sensor, turn-off by dawn or by the adjustable timer, e.g. after. 8 hours. Over-charge and low-discharge protection for the battery. Pole: Steel hot-dip galvanized, height 500cm + 80cm for concreting. Rigid plastic case for inground-mount for the batteries, (walk-over). Size 360 x 260 x 320mm. Daily operation at dark-cloudy weather: a) Standard version: 1 day (16 hours) b) with extension kit autumn: 2 days (24 h) c) with extension kit winter: 4 days (40 h) Distance from pole to pole = Lighted area Ø aprx. 25 meter Ambient temperature: -35°C ~ +60°C Maintenance-free (only sometimes is the cleaning of the solar panel required). Included in the shipment: High-power battery, pole and lamp.
More than 70% energy saving 4 x 6 LED module design, convenient for maintenance Uses Original American Cree or Philips Lumileds Universal input voltage: 85 to 264V AC, 277V Light control and time-phase dimming, saving further energy High-quality power supply, reliable and stable With automatic reduce current against overheating temperature With unique optical design and rectangular beam, suitable for roadway illumination. Specifications: Input voltage: 85 to 265V AC/36V DC Frequency: 47 to 63Hz Power factor: >0.95 THD: less than 15% LED source: Cree 72 x 2W LED power: 144W Luminous efficiency: >80lm/W Initial luminous flux: >11,520lm Constant luminous flux: >10,368lm Luminaire efficiency: >80% System resistance: 0.16/W Operating temperature: -30 to 50¡ãC Working humidity: 10 to 90% RH Warm white: 3,000 to 5,000K Neutral or cold white: 5,000 to 7,000K CRI: >75Ra Light distribution curve: rectangular optical spot Effective illuminating area: (H) 8m, 30 x 10m, (H) 12m, 42 x 16m Illuminance standard: (CJJ45-2006) Chinese urban roadway lighting standard Configuration: integral die-cast aluminum alloy housing with heat sink Diffuser: anti-UV tempered glass Manufacturing process: patent heat extraction board technology IP rate: IP65 Useful lifespan: >50,000 hours Wind resistance index: 12 Optional interface: digital dimmer interface (0 to 10V analog or DM x 512) Installation way: horizontal or longitudinal arm installation Electrical class: class I Dimensions: 766 x 349 x 79mm Applications: Ideal for street lighting on urban streets, gymnasiums, sidewalks, residential areas, industrial parks, squares, parks, schools and gardens.
Included electronic ballast. Adjustable lamp holder BY22d for low-pressure sodium lamp SOX 35W. The lamp has an extreme high efficiency and gives a yellow light, as bright as aprx. 200 watts halogen. The efficiency much better than fluorescent, metal halide, HPS or LED technology. Power consumtion 40.2 watt. Operating voltage: 200 - 240V ac. On request available in 12V DC or 24V DC For a wide ambient temperature range: - 30°C ... + 50°C For lamp SOX 35W BY22d. ( Life-time 18.000 h ), The lamp has to be ordered extra. The housing is made of aluminium die-cast for maximum heat exchange and long life. The service door is made of uv-resistant polymer and can be opened completely and is fixed straight up. The lamp cover lens is out of Borosilicate glass (for maximum light transparency even after many years) with double prismatic light distribution. Mounting: Horizontal or vertical pole Ø 42 - 60 mm. Housing grey powder-surfaced. IP rating: IP54 (optical system), IP 23 (supply unit). CE approved. Dimensions: 735 mm x 355 mm x 190 mm 596 Lux /m. MOQ 12 pcs. 6 kg / pc.
More than 70% energy saving 4 x 6 LED module design, convenient for maintenance Uses Original American Cree or Philips Lumileds Universal input voltage: 85 to 264V AC, 277V Light control and time-phase dimming, saving further energy High-quality power supply, reliable and stable With automatic reduce current against overheating temperature With unique optical design and rectangular beam, suitable for roadway illumination.
Input voltage: 90 to 264V AC/24V DC Frequency: 47 to 63Hz Power factor: >0.95 LED consumption: 96W System consumption: 103W Power efficiency: 93% LED working voltage: 24V DC LED luminous efficiency: >95lm/W LED initial flux: >8,600 (Tj = 25) Lamp's efficiency: >84lm/W Color temperature: 4,500 to 5,000K Color index: >75Ra Light source: Cree Emitter (1W) Light distribution curve: asymmetric/rectangular beam Junction temperature: less than 75¡æ Working temperature: -38 to 60¡æ Working humidity: 10 to 90% RH Storage temperature: -40 to 80¡æ Working lifespan: >50,000 hours Light body: aluminum alloy Net weight: 6.7kg IP rating: IP65 Product size: 629 x 315 x 86mm Packing size: 680 x 380 x 160mm.
Product details: Energy-saving: more than 70% 4 x 6 LEDs module design Convenient for maintenance LED type: original American Cree or Phillips luminous Universal input voltage: 85 to 300V AC Light control and time-phase dimming, saving further energy High-quality power supply, reliable and stable, automatically reduce current against over-heating temperature Unique optical design and rectangular beam, suitable for roadway illumination Main technology index: Equivalent: 70W high-pressure sodium lamp LED light source: 24 pieces of 1W Cree/luminous rebel LEDs LED luminous efficiency: 107 to 122lm/W Lamp total rated power: 30W Power efficiency: >86% Lamp rated luminous flux: >2,200lm Lamp rated luminous efficiency: >75lm/W.
Salient Features:- Adopt High brightness LEDs.:- tremendous Energy Saving-Used the ultra power, high brightness LED light source, together with the high power efficiency power supply, which can save energy 50%-80% than the conventional sodium and mercury lamps. Lifespan is 50,000 hours and we guarantee them for 2 years. Unique Integrated Lens and Lampshade Design - Array Lens play a protective and spot light role, avoid wasteful duplication of light and reduce the loss of light. No Adverse Glare : - Eliminate the glare caused by the adverse ordinary lights glare and visual fatigue sight interference, improve driving safety, reduce the incidence of traffic accidents, Fully embodies the spirit of "People-oriented Technology" Direct Replacement Light Source Design :- Direct replace the existing high-pressure mercury lamp, high pressure sodium lamp, metal halide lamps, no need to change the original lamp shell. Wide Working Voltage :- 85-265VAC full voltage range The brightness and working life will be reduced if the working voltage change more than 7% for the traditional streetlight, but it will not influence our LED Streetlight at all Intelligent Current Control :- whatever any deviant situation, it is able to achieve the precision constant current, ensure the LED can work under the secure current. Green and Environmental Protection :- no lead, no mercury, no environmental pollution, PWM technology, high Perfect Combination With Solar Energy :- Fully exert the advantage of the LED work under low voltage and environmental work according to the local solar resources, electricity & solar can also be combined. To achieve the best cost performance & High reliability
Optional illuminant LED high pressure sodium metal halide lamp high-pressure mercury lamp, We are specialized in manufacturing various of cast iron, cast alu and steel lighting pole. 1) Material: iron, alu and steel. 2) Height: from 2m to 12m. 3) Weight: Sccording to your drawings 4) Packing: standard export packing ---plastic film and wooden pallet. 5) Paint: anti-rust paint, powder coating 6)Type:round , Polygonal, single arm, dual arms or according to your requirement. 7)mainmarket: the whole words who need poles 8)Payment: TT Packing: standard export packing ---plastic film and wooden pallet.
1) Strict 100% inspection of raw material before production 2) Lab testing in radom material and do the production sample for production department 3) 100% PCB inspecting and tube spark before assembling 4) 100% 2hrs aging testing 5) On-site quality testing before packing 6) QA testing in radom lab before shippment. Colour box or blister Export standard kraft carton Or according to your requirement.
Features: 1. High quality Triphosphor tube light that integrated with reliable driver. 2. Excellent design with the frosted glass cover that provide soft light. 3. A direct replacement for the conventional fluorescent tube with at least 50% energy saving. 4. Different color temperature for various applications. 5. Color Rendering Index upto 80Ra. Input voltage: AC100-240V Frequancy: 50Hz Base: G13 Diameter(mm): 15 Length(mm): 1149/1149/849/549 Average life hrs: 10000 Watts: 20W/18W/14W/10W Equal to conventional T8 fluorescent: 40W/40W/30W/20W. Diameter(mm): 15 Length(mm): 1149/1149/849/549.
Features: 1. 100,000 hours rated lamp life. 2. Three years warranty on ballast, and five years warranty for lamps. 3. High quality die-casting aluminium housing is corrosion and vibration resistant. 4. Front opening for easy maintenance. 5. Operating Frequency: 250 KHz 6. Operating Temperature: -25¡æ to 50¡æ 7. 5000K standard color temperature, optional 2700K-6400K. 8. CRI>80 Ra 9. Flicker-free, instant start, stable light output. 10. IP 65 rating, WF1 anti-corrosion grade. 11. Power factor of 0.96 or greater. 12. Optional lamp covering include: tempered glass covers. Applications: Stadiums, workshops, warehouses,gymnasium, parking lots,Supermarkets,amusement parks, exhibition halls etc. Carton with polyfoam inside.
1. Higher efficiency of energy saving (power factor >0.98) 2. Long life span,>60000hrs 3. Low luminance decline(20000hrs78Ra) 5. Less manpower and maintenance cost 6. No harmful strobe low glare 7. Broad voltage (AC90V-270V,DC12V-24V),wide adaptable range of power supply 8. Selectable color temperature 9. Without preheating 10. Green and environment friendly. One wooden carton per unit.
1. CE,RoHS 2. Lifespan>50000Hrs 3. 3yrs warranty 4. Bridgelux chip Street light is widely used. Our products designed graceful, and sell on reasonable price. They have the advantage of such as optional voltage, low consumption, high power deficiency, no uv or ir radiation ect.Favorable color temperature and exellent flux also is your top choice. The rigid long shape paper case with some soft thing in it to protect the products or pack it as your special requirements!
Specification 1. We supply all kinds of quartz sleeves for broad range of applications. 2. Two sides opened/one side opened, and round bottom/flat bottom are all available. 3. A wide variety of thicknesses, lengths and diameters can be chosen.
1)Better ground illuminance: We use our own patent LED which have rectangular shape light distribution without using lens. Our 50W LED is brighter than 250W sodium lamp which is typically used for 8 meters pole (regular vendors need about 80-120W LED lamp to reach the same ground illuminance like us). 2) 100% lighting in rainy days: Our solar street light can save >80% power than the regular solar garden lights. Therefore, our solar street light can work 5 times longer in rainy days than the other solar street lights. It means, under same configuration, if other company¡¯s product can work for 5 rainy days, our solar street light can Work for > 25 rainy days. By now we¡¯re the only company who could guarantee 100% lighting of solar garden light throughout the year. 3) Longer Life span: The life span of our solar street lights is much longer than many regular vendors, e.g. our battery could work for 5-8 years V.S. 1-2 years (
High power led street light Specification: Model Number AOLD1003140J3 Luminous Flux 12000-13000LM Power Consumption 2*70 W Equal to HPSL 250 W Input Voltage AC85-264V Colour Rendering Index Greater than 80 Ra Colour Temperature 2700-12000K Size (L)80*(W)*37(H)*15.5MM Material Aluminum+PVC retroreflector + frosted toughened glass Color of lamp body Sliver IP LEVEL 65 Net Weight 14.3 KG/PC Quality control: We have our QC personnel to test the quality,each of our lamp must be passed the test processes as follows: 1st.Tested by our skillful quality inspectors,the main test items are Appearance,Structure,Material quality etc. 2nd.Tested by our engineers,inspecting the Luminance,Color temperature, Lighting angle,Life Expectancy,IP rating etc. 3rd.Tested by our packing department quality controller. 4th.Tested by our sampling members,adopting the spot-check to inspect the oeverall quality. 5th.Tested by our salers. Delivery and R&D: Delivery:Air transportation,Sea transportation,Land transportation all could be offered if in demand,since we have our own big factory,and have skillful workers,having more advantages in production time and delivery time than other factories. R&D:Our R&D department with ten skilled egineers are constantly evaluating the best products from around the world.This global reach helps keep us at the forefront in technological innovation and ensure that we can design 5 new models each month very easily. Features: 1. Long life time 50 000hours(5 years) 2. Energy saved up to 70-80% high intensity than fluorescent tubes. 3. Not easy borken. 4. No hazardous materials, completely RoHS compliant 5. No need maintenance, long life of LED,no trouble of replace parts of ordinary Bulb Light 6. No flash, DC driving, stable light, protect eyes, prevent hurt of eyes and accident of component 7. Good color vision, color temperature can be adjusted from 2500-10000k common box and carton,of cause your demands could be satisfied.
Hy Brid Solar Street Lights 30w -160w.. 365days running time.
