Our SLHY horizontal ribbon mixer for animal feed production is widely used in feed mills, for mixing powder materials, guaranteeing uniformity and quality of complete feed. During the convection process of the feed mixing machine, the two materials are mixed through penetration and displacement and then mixed during the tumbling process on both sides. This is repeated many times and finally mixed by the unloading device. Then the material is discharged from the discharge door.
It is a professional industrial use of grass pellet machinery that produces grass pellets. The key to grass pelletizing is the water content of the raw grass. First of all, we must measure the moisture content of the raw materials. Then, regulate it to an appropriate value by adding water or sun-drying. Research shows that the best moisture content for leguminous forage grass pellets is 14% to 16%. For Gramineae forage grass pellets it is 13% to 15%. In fact, grass pellets can also be used as fuel for heating if the moisture is accurately controlled. Grass pellets may produce more ash than wood pellets, and the calorie in grass pellets is not so much as in wood pellets, but grass pellets have still a well-accepted method in Europe for a long time. In a word, the grass pellets are an excellent choice for both feed and fuel.
The complete sheep feed pellet production line uses corn, wheat bran, soybean meal, feed yeast powder, alfalfa meal, hay, skimmed milk powder, calcium phosphate, salt, and other trace raw materials to produce pellet feed. The pellets are rich in nutrients and can meet the growing needs of sheep at different growth stages. By combining the moisture, heat, and pressure of the feed ingredients, a degree of gelatinization is created, which allows sheep to better utilize the nutrients in these ingredients. Feed pellets are widely used in small farms and large and medium-sized feed mills. Our sheep feed granulation production line includes grain hammer mills, conveyors, mixers, sheep feed pellet mill makers, coolers, crumbling machines, screening machines, automatic packing machines, etc. The 2-12mm cylindrical feed pellets can be produced according to your needs. At the same time, the sheep feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service.
Starting a livestock feed pellet factory has been a profitable business activity in many countries. The production line of the livestock feed pellet factory specializes in producing pig feed, horse feed, cattle feed, sheep feed, donkey feed, rabbit feed, etc. How to make livestock feed? You need livestock feed pellet plant equipment first. Our livestock feeds pellet mill production line with output ranging from 1 t/h to 100 t/h. A complete livestock feed pellet plant includes raw material storage, a cleaning machine, a feed crusher, a feed mixer, a livestock feed pelletizer, a cooler, a screening machine, a packaging system, transportation, and an electronic control system. Our feed pellet production line can produce 2-12mm cylindrical feed pellets according to your needs. At the same time, the livestock feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. We provide free installation, training, factory design, and timely after-sales service.
The complete cattle feed pellet production line uses barley, forage, pulses, bran, wheat, corn, and additives such as vitamins, minerals, and other essential trace ingredients to produce feed pellets. The granules are rich in nutrients and can meet the growing needs of cattle at different growth stages. By combining the moisture, heat, and pressure of the feed ingredients, a degree of gelatinization is created, which allows cattle to better utilize the nutrients in these ingredients. Feed pellets are widely used in small farms, large farms, and medium-sized feed mills. Our premium cattle feed pellet production line includes grain hammer mills, conveyors, mixers, cattle feed pellet mills, coolers, crushers, screeners, automatic packaging machines, and more. 2-12mm cylindrical feed pellets are available according to your needs. At the same time, the cattle feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service.
Starting an animal feed milling machine has been a profitable business endeavor in many countries. The animal feed production line is mechanical equipment that specializes in making animal feed. For example, it can produce chicken feed, cattle feed, sheep feed, pig feed, horse feed, cat food, dog food, fish feed, shrimp feed, and so on. How to make animal feed? You need animal feed production line equipment. Herm machinery computer control animal feed pellet plant production line with an output range of 1ton/hour to 100ton/hour, Complete animal feed production line includes raw material storage, cleaning machine, crushing machine, feed mixing machine, animal feed pellet machine, cooling machine, screening machine, packaging systems, transportation, and electronic control system. The complete animal feed pellet production line uses barley, forage, pulses, bran, wheat, corn, and additives such as vitamins, minerals, and other essential trace ingredients to produce feed pellets. The granules are rich in nutrients and can meet the growing needs of animals at different growth stages. By combining the moisture, heat, and pressure of the feed ingredients, a degree of gelatinization is created, which allows animals to better utilize the nutrients in these ingredients. 2-12mm cylindrical feed pellets are available according to your needs. At the same time, the animal feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. Another, we provide free installation, training, factory design, and timely after-sales service.
Starting a poultry feed processing plant has always been a profitable business in many countries. Poultry feed plant specializes in producing duck feed, goose feed, chicken feed, bird feed, parrot feed, and other poultry feed, etc. How to make poultry feed? You need a poultry feed pellet production line first. Our fully automatic poultry feed mill plant with output ranging from 1ton/h-100ton/h. The complete poultry feed pellet production line includes raw material storage, a washing machine, a feed crusher, a feed mixer, a poultry feed pelleting machine, a cooler, a screening machine, a packaging system, transportation, and electronic control system. The poultry feeds pellet plant has good raw material versatility and can be used for the granulation of various raw materials such as corn, sorghum, wheat, beans, and oilseed meal. At the same time, the poultry feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service.
The complete chicken feed production line uses corn, wheat, soybean, grain, soybean meal, cottonseed meal, stone powder, premix, and other biomass as raw materials to produce pellet feed. The process of our automatic chicken feed production line includes grain hammer mills, conveyors, mixers, chicken feed pellets, coolers, pulverizers, screening machines, automatic packaging machines, etc. The different diameters of feed pellets can be produced according to your needs. The use of chicken feed pellets in chicken farms can greatly reduce chicken feed waste, improve feed utilization, kill harmful parasites, and reduce the probability of chicken disease. In addition, the pellet feed is easier to transport and store, and has good palatability, making it a good choice for chicken farms. The chicken feed pellet mill machine has good raw material versatility and can be used for the granulation of various raw materials such as corn, sorghum, wheat, beans, and oilseed meal. At the same time, the chicken feed production plant has the characteristics of low energy consumption, high production efficiency, and large profits. It is especially suitable for large feed mills, breeding farms, large farms, etc. At the same time, we provide free installation, training, factory design, and timely after-sales service.
Technical Parameters Table size (LxW): 1000x500 mm; T-Slot (width-number-distance): 5-18x90 mm; Maximum table loading capacity: 500 kg; X/Y/Z Axis travel: 800/500/500 mm; Distance from spindle nose to table surface: 150-650 mm; Main spindle speed: 8000 rpm; Spindle motor power: 7.5/11 kw; Spindle taper: BT40 ; Torque of X/Y/Z Axis motor 12/12/22 Nm; Rapid feed speed (X/Y/Z): 48/48/48 m/min; Cutting feed speed (X/Y/Z): 10000/10000/10000 mm/min; Positioning accuracy(X/Y/Z): 0.01/0.01/0.01 mm; Repeated positioning accuracy(X/Y/Z): 0.005/0.005/0.005 mm; Tool magazine type: Arm type ; Tool magazine capacity: 24 pcs; Maximum diameter of tool (full/empty): 78/120 mm; Maximum length of tool : 300 mm; Maximum weight of tool: 8 kg; Tool change time(T-T): 2 sec; CNC Controlling system: Fanuc ; Machine weight: 5000 kg; Machine overall size: 4000x2400x2400 mm;
Technical Parameters Table size (LxW): 800x500 mm; T-Slot (width-number-distance): 5-18x90 mm; Maximum table loading capacity: 500 kg; X/Y/Z Axis travel: 650/500/500 mm; Distance from spindle nose to table surface: 120-620 mm; Main spindle speed: 8000 rpm; Spindle motor power: 5.5/7.5 kw; Spindle taper: BT40 ; Torque of X/Y/Z Axis motor 8/8/12 Nm; Rapid feed speed (X/Y/Z): 48/48/48 m/min; Cutting feed speed (X/Y/Z): 10000/10000/10000 mm/min; Positioning accuracy(X/Y/Z): 0.01/0.01/0.01 mm; Repeated positioning accuracy(X/Y/Z): 0.005/0.005/0.005 mm; Tool magazine type: Arm type ; Tool magazine capacity: 24 pcs; Maximum diameter of tool (full/empty): 78/120 mm; Maximum length of tool : 300 mm; Maximum weight of tool: 8 kg; Tool change time(T-T): 2 sec; CNC Controlling system: Fanuc ; Machine weight: 4500 kg; Machine overall size: 4000x2400x2400 mm;
POWER AC Â 110 Â / Â 220V Â 50 0 Â HZ MOTOR AC220V 550W CRIMPING FORCE 2Ton FIT FOR ALL KINF OF TERMINAL OPERATION FOOT SWITCH SIZE 290W 290L 600H(mm) WEIGHT 45KG
Technical Parameters Work table Size (LxW): 400x680 mm; Travels of X/Y axis: 400x500 mm; Cutting height: 500 (customized) mm; Speed of diamond wire: 0-50 m/s; Diameter of diamond wire: 0.7/2.5 mm; Best surface roughness: Ra0.8 u.m Pulse equivalent: 0.001 mm; Feed speed: Controlled and regulated by computer software (Graphite:5-15cm/min, height:70cm. Graphics machining accuracy:�?10postive and negetive0.05mm ) ; Noise: less than 60 dB; Tension control: Pneumatic adjustment ; Power supply: 380V, 50HZ v; Power consumption: 2 kw; Maximum loading capacity: 400 kg; Machine weight: 1500 kg; Overall dimension (LxWxH): 1350x1760x1600 mm;
SX7763 Technical Parameters Work table size (LxW): 700x1060 mm; Travels of X/Y axis: 630x800 mm; Cutting height of Z axis: 200 (customized according to material) mm; Minimum cutting thickness: 0.3 mm; Speed of wire: less than 15 (variable frequency) m/s; Feed speed: Controlled and regulated by computer software ; Range of wire storage capacity: less than 200 m; Diameter of wire : 0.16-0.42 mm; Tension control: A. Pneumatic adjustment,B.Electrical adjustment ; Cutting material: Fragile and non-conductive non-metallic materials ; Working fluid : Tap water (customized according to material) ; Power supply: 380V, 50HZ v; Power consumption: 2 kw; Maximum loading capacity: 1000 kg; Approx. Machine weight: 2500 kg; Machine overall size (LxWxH) 1900x1900x1800 mm.
SX7750 Technical Parameters Work table size (LxW): 600x900 mm; Travels of X/Y axis: 550x660 mm; Cutting height of Z axis: 200 (customized according to material) mm; Minimum cutting thickness: 0.3 mm; Speed of wire: less than 15 (variable frequency) m/s; Feed speed: Controlled and regulated by computer software ; Range of wire storage capacity: less than 200 m; Diameter of wire : 0.16-0.42 mm; Tension control: A. Pneumatic adjustment,B.Electrical adjustment ; Cutting material: Fragile and non-conductive non-metallic materials ; Working fluid : Tap water (customized according to material) ; Power supply: 380V, 50HZ v; Power consumption: 2 kw; Maximum loading capacity: 700 kg; Approx. Machine weight: 2300 kg; Machine overall size (LxWxH) 1800x1890x1700 mm.
SX7740 Technical Parameters Work table size (LxW): 400x680 mm; Travels of X/Y axis: 400x500 mm; Cutting height of Z axis: 200 (customized according to material) mm; Minimum cutting thickness: 0.3 mm; Speed of wire: less than 15 (variable frequency) m/s; Feed speed: Controlled and regulated by computer software ; Range of wire storage capacity: less than 200 m; Diameter of wire : 0.16-0.42 mm; Tension control: A. Pneumatic adjustment,B.Electrical adjustment ; Cutting material: Fragile and non-conductive non-metallic materials ; Working fluid : Tap water (customized according to material) ; Power supply: 380V, 50HZ v; Power consumption: 2 kw; Maximum loading capacity: 400 kg; Approx. Machine weight: 1500 kg; Machine overall size (LxWxH) 1350x1760x1600 mm.
Technical Parameters Work table size (LxW): 330x620 mm; Travels of X/Y axis: 320x400 mm; Cutting height of Z axis: 200 (customized according to material) mm; Minimum cutting thickness: 0.3 mm; Speed of wire: less than 15 (variable frequency) m/s; Feed speed: Controlled and regulated by computer software ; Range of wire storage capacity: less than 200 m; Diameter of wire : 0.16-0.42 mm; Tension control: A. Pneumatic adjustment,B.Electrical adjustment ; Cutting material: Fragile and non-conductive non-metallic materials ; Working fluid : Tap water (customized according to material) ; Power supply: 380V, 50HZ v; Power consumption: 2 kw; Maximum loading capacity: 250 kg; Approx. Machine weight: 1200 kg; Machine overall size (LxWxH) 1140x1580x1540 mm.
Smart Aluminium Foil Container Production Line Model: SEAC-130AS (Five/Six Cavities Capacity) Technical data: Max. Mould Size: 1480*1000*500mm; Efficiency: 45-75 times/min; Stroke: 150~300mm; Press Work Plate Dimension: 1500*1000mm; Production Line Total Power: 18KW; Production Line Total Size: 7100*2600*3600mm; Net Weight: 15, 000kg; Units Included: 1. Auto-lubricated feeder 2. Touch screen controlled panel 3.130Ton H type Pneumatic Press 4. Cavities Mould of any shape container 5. Automatic stacker 6. A forklift assist to change mould and raw material 7. Scrap sucker+Scrap presser (One Presser work with 2 Sucker) SEAC-130AS is the four cavities or five cavities capacity model production line for AFC. Complete real automatic level upgrade your factory capacity, lead your company be higher level competition and situation.
Complete Automatic Aluminum Foil Container Making Machine Line Model: SEAC-55AS Units: Automatic Feeder+Automatic55Ton Press+Cavities Mould+Auto Stacker+Scrap Sucker & Auto Presser. It fit for all common size Aluminum Foil Container production requested. The Big capacity could to cover big range of size products. Lower power requested than other old model machines. Specification: 1. Raw material: Aluminum foil; Thickness: 0.030mm ~0.250mm; Alloy: 8011, 8006, 3003, 3005; Temper O to H24; 2. Good Japan's Inverter, PLC and 10inch Touch Screen control system; 3. Max. Width of Aluminum foil: 600mm; 4. Max. Diameter of Aluminum foil: 700mm; 5. Core diameter of Aluminum foil: 76mm(152mm as Optional ); 6. Working speed: 40-75 times/min; 7. Total Power: 13kw; 8. Compressed air needed: 0.5- 0.8 Mpa, 0.2m3/min; 9. Install dimension: 6100*2600*3200mm; Technical Data: Max. Mould Size:L700*800*420mm; Slide block stroke: 120-200mm (Standard: 180mm); Automatic mould adjust unit: 0.5kw; Work plate dimension: 700*950mm; Mould handle hole dimension: 50*60mm(Diameter*Depth); Power: 3P, 380/220V, 50/60Hz; Net weight: 6000kg. SEAC-55AS is two cavities capacity for Aluminum foil container production now, it have instead of the old 40Ton model, as it is more big capacity to cover container size! Complete automatic level upgrade your factory capacity, lead your company be higher level competition and situation.
Complete Automatic Aluminum Foil Container Making Machine Line Model: SEAC-63A-4 : Max. Mould Lenght 1150mm Units: Automatic Feeder+Automatic 63Ton Press+Cavities Mould+Auto Stacker+Scrap Sucker& Presser. It fit for all common size Aluminum Foil Container production requested. The Big capacity could to cover big range of size products. Lower power requested than other old model machines. Specification: 1. Raw material: Aluminum foil; Thickness: 0.030mm~0.250mm; Alloy: 8011, 8006, 3003, 3005 etc.; 2. Japan Inverter, PLC and 10inch touch screen control system; 3. Max. Width of Aluminum foil: 880mm; 4. Max. Diameter of Aluminum foil: 1000mm; 5. Core diameter of Aluminum foil: 76/152mm; 6. Working speed: 40-75 times/min; 7. Total Power: 11kw+2kw+2kw+1kw; 4Motor 8. Compressed air needed: 0.5- 0.8 Mpa, 0.2m3/min; 9. Install dimension: 7100*2600*3500mm; Technical Data: Max. Mould Size: 1100*900*450mm; Slide block stroke: 180-260mm; Slide block dimension: 380*145mm; Automatic mould height adjust unit: 0.5kw; Work plate dimension: 1100*200*300mm, separated two sets with Balls; Tension: complete automatic adjust; Feeding System: Servo Motor, higher precision and more power; Auto Stacker: SMC lift for stacking system, top quality; Power: 4P, 380V or 220V, 50Hz /60Hz; Net weight: 9,500kg.
Power voltage AC220V Power supply 220V/50Hz, 80W Weight 45Kg Binding diameter range 18-45mm Binding diameter 115-220mm Binding coil number Can be set, 3-5 laps recommended Cable tie Encapsulates the core Safety device The fuse, fault alarm downtime Size 400*390*580mm
