Disposable Aluminium Foil Dishes Making Machine Each machine consists of: -1 Unit Press / Punching Machine -1 Unit Aluminum Foil Feeding Machine -1 Unit Conveyer Belt -1 Unit Receiving Table -1 Unit Automatic Scrap Collecting System -1 Unit Air Compressor System -1 Unit Aluminum Foil Test Roll -1 Unite Manual Operation Lifer-Loading/Unloading Material and Mould -1 Unit Digital PLC Computerized Panel Control After-sales Service Provided:Engineers available to service machinery overseas -With Auto counting stacker, aluminum foil container could count and stacked automatically. -Manual setting of the aluminum foils feeding length from 20 to 999mm by you. -With automatic lubrication system and aluminium foil material could lubricate automatically. The features are feeding accuracy, coating even, saving material, high accuracy, neat appearance, small size, easy to install, operate, maintain, little noise, as a result, it is the ideal equipment for aluminum food containers & hardware products and so on. Optional Consist for the Food Container Machine
Impact Testing Equipment Testing Machine for Mechanical Properties of Tempered Glass Shot Bag 1) Weight:45kg±0.1kg 46kg±0.1kg 2) Height: 330mm ± 13mm 3) Max diameter: 250mm 4) Lead sand size: 2.5mm Pneumatic Tyres Impactor Pneumatic Tyres Device for Pendulum Test of Glass In Building According to BS EN 12600 Reference standard: BS EN 12600:2002 Glass in building - Pendulum test - Impact test method and classification for flat glass MS 1498:2017 Safety glass in building - Specification Technical Parameters: Weight 50 kg ± 0.1 kg Tire pressure: 0.35Mpa ± 0.02Mpa Type: 3.50-R8 4PR Impact Frame Test Frame: Frame Size: 1900mm*1500mm*3570mm Samples Size: 1930mm*864mm Lift: Electric Release: Auto Maximum impact height: 1200mm (customized) Rubber Pad Width: 15mm Rubber Pad Thickness: 3mm Rubber Pad Hardness: Shore A50 Drop Ball Impact Test Machine Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object Hardness steel ball: a) 2260g ± 20g, diameter of approximately 82.5mm b) 227g ± 2g, diameter of approximately 38 mm c) 1040g ± 10g, diameter of approximately 63.5 mm d) 508g±3g, diameter of approximately 50 mm Frame Height: 1000mm, 5000mm, 12000mm, Customized Automatic release and lift. Power: 220V 50Hz 580W Supporting fixture: a) Support Size: 350mm*350mm and 660mm*660mm (Customized) b) Frame width 15mm c) Steel box height 150mm d) Rubber Gasket: thickness 3mm, width 15mm, hardness shore A50 e) Interposed sheet of rubber: thickness 3mm, hardness shore A50 Applied Test Pieces Size: 300mm*300mm 610mm* 610mm Head-form Test Device Head Weight: 10kg Head Size: 500mm*932mm Impact height: < 1.5m Samples size: 1100mm*500mm Felt hat: 90g/89mm/3mm Frame size: 1400mm*666mm*320mm
Medical Face Mask Machine automatic high-speed mask 1. The machine is dense and does not occupy space; 2. PLC program control, high stability and low failure rate; 3. The whole machine adopts aluminum alloy structure, which is beautiful and firm without rust; 4. Photoelectric detection to reduce the error rate. 5. The welding strength of the ear strap is adjustable. 6. Using ultrasonic system, stable performance and easy operation.
Standard Name: Insulating glass used on multiple units Reference Standard: NF F 01-492 Clause 10.8 and 16.8 Technical Data: Weight: 50kg Height: 600mm Max Diameter of the Soft Body: 400mm Hardened Glass Diameter: 3mm Diameter of the Bag Top: 80mm Diameter of the Bottom Leather Sewn Crown: 120mm Detailed Description: A common bag for this procedure could be, but not necessarily, assembled as follows: 1. Eight awning cloth sections assembled and sewn in a saddle-like manner. 2. The dimensions of the filled bag are those of the volume composed of a 400 mm diameter sphere included in a cone with a peak that is 400 mm away from the center of the sphere. 3. The bottom of the bag is reinforced by a 120 mm diameter leather sewn crown. 4. The top of the bag is slightly truncated in order to provide an 80 mm diameter opening. This opening is reinforced by an overstitched leather edge, onto which four equidistant rings are fixed that are included in a lifting ring. 5. The bag is filled with hardened 3 mm â?? 8 mm diameter glass / iron balls (normally used for paint grinding) and have a tare weight of 50 kg + 0.5 kg.
The C1300 press has been designed and developed exclusively for the production of aluminum food containers, dishes and trays. These products are obtained by blanking and forming of aluminum which has been unwound from a coil. The C1300 press is a â??Hâ??-frame press with 80-ton capacity. The large working bedplate of the press is equipped with two removable supports with adjustable height to facilitate changing the tools while protecting the surfaces of the press. This permits the press to use standard tools as well as tools designed with air cylinders below the bottom plate. The press uses one brushless motors to feed the aluminum strip allowing accurate control of step and speed. The height of the feeding system is manually adjustable to match the strip height of the tool currently in use on the press. There are electronic cams (solenoid valves) controlled by a PLC and fixed air connections with pressure regulators, providing easy tool set-up. The C1300 press is equipped with two compressed air tanks. The pneumatic control panel is easily accessible during operation of the press. The press may be equipped with tools for wrinkled-wall and smooth-wall, container production. If you are intrested in our aluminum foil container making machine and mould, please contact with us.
Manufacturer of aluminum profile processing equipment, manufacturing and sales of broken aluminum doors and windows and plastic steel door and window processing equipment . To be satisfied with products, create a strong brand, internal plastic quality, and external image, with its high, precise, sophisticated and specialized operation mode, and good reputation, it has become a benchmark brand in the same industry at home and abroad. One of our hot products: High precision digital display double head aluminum profile extrusion cutting saw machine Main features: Main Features 1.Used for Aluminum profile high accurate Cutting 2.Imported Linear bearing system in moving and feeding device ensures the accurate the machine running and cutting, and stable performance. 3.Digital display system equipped can be easy readout the accurate cutting length and quantity automatically, ensures a high accurate re-load position and easy operation . 4.Pneumatic -hydraulic damp device ensured the saw blade stable feeding and working. 5.cutting angle change Automatic between 45° (outward)and 90°. 6.Imported carbide saw blade for a high quality cutting and long service life. 7.Automatic Safety system of shield can ensure the safe operation . 8.Spraying cooling system, make sure carbide saw blade long service life Main Technical Parameters Power supply: 380v 50Hz Weight: 1400Kg Motor power; 2*2.2KW Cutting width max: 135mm Motor rotary speed: 2800r/min Cutting angle: 90° and 45° (outward) Operation air pressure: 0.5~0.8Mpa Feeding speed 0~3m/min Saw blades length: 370~4200mm Saw blade specification: Φ500�Φ30�δ4.4mm Z=120 Air consumption: 60L/min Dimension: 5500mm�1750mm�1990mm Cutting height: 200mm�90°;190mm�45°
1,Suitable for dyeing fabric: cotton, polyester/cotton blended yarn,polyester, acrylic, nylon, ramie, viscose rayon fiber, cotton/linen blended 2,The machine body and part that touches the dye liquor are made of high anticorrosively stainless steel. 3,Improve the motor drive controlled by transducer,minimizing the slippage between fabric and lifter and ensuring the fabric simultaneously running between roller and fabrics. 4,Pumps unique designed with stainless steel which makes dye liquor keep certain pressure and flow rate.Thus,it ensures fabric smooth delivery in dye liquor. 5,Nozzle of pure overflow construction provides more strong osmosis force of liquor circulation for fabric delivery. 6,Automatic heating control.
Safety Glass Impact Testing Equipment 45kg/46kg shot bag and 50kg Pneumatic Tyres Impactor. Processed in accordance with ANSI Z91.1, ISO 3537, BS EN 12600 and AS NZS 2208. Related Standards: AS/NZS 2208 Safety glazing materials in buildings Appendix D: Impact Test GB 15763.3 Safety glazing materials in building Part 3: Laminated glass Appendix C: Test device for the impact performance of shot bag ANSI Z97.1 Safety Glazing Materials Used in Buildings - Safety Performance Specifications and Methods of Test - Clause 5.1: Impact Test Application: Determining the resistance of glazing materials to impact by the penetration method. Test Frame: Frame Size: 1900mm*1500mm*3570mm Samples Size: 1930mm*864mm Lift: Electric Release: Auto Maximum impact height: 1200mm (customized) Rubber Pad Width: 15mm Rubber Pad Thickness: 3mm Rubber Pad Hardness: Shore A50 Impact Shot Bag: Reinforced leather bag filled with chiller lead shot. Technical Data: Weight: 45kg±0.1kg 46kg±0.1kg Height: 330mm ± 13mm Max diameter: 250mm Leather thickness: 1.5mm Lead sand size: 2.5mm Customized: 25kg /48kg
Safety Glass Impact Testing Equipment. 45kg/46kg shot bag and 50kg Pneumatic Tyres Impactor. Processed in accordance with ANSI Z91.1, ISO 3537, BS EN 12600 and AS NZS 2208. Related Standards: AS/NZS 2208 Safety glazing materials in buildings Appendix D: Impact Test GB 15763.3 Safety glazing materials in building Part 3: Laminated glass Appendix C: Test device for the impact performance of shot bag ANSI Z97.1 Safety Glazing Materials Used in Buildings - Safety Performance Specifications and Methods of Test - Clause 5.1: Impact Test Application: Determining the resistance of glazing materials to impact by the penetration method. Test Frame: Frame Size: 1900mm*1500mm*3570mm Samples Size: 1930mm*864mm Lift: Electric Release: Auto Maximum impact height: 1200mm (customized) Rubber Pad Width: 15mm Rubber Pad Thickness: 3mm Rubber Pad Hardness: Shore A50 Impact Shot Bag: Reinforced leather bag filled with chiller lead shot. Technical Data: Weight: 45kg±0.1kg 46kg±0.1kg Height: 330mm ± 13mm Max diameter: 250mm Leather thickness: 1.5mm Lead sand size: 2.5mm Customized: 25kg /48kg
Conduct oil heat (steam) drying drum dryer belongs to indirect heating mode, the heat conduction oil or steam drying heat, this type of dryer has low energy consumption of drying, the safety drying process, the material is not affected by heat source pollution, etc., which are widely used in the biomass, food, feed, fertilizer, bad slag chemical industry, medicine, coal, mining, and other small particles or weakly caking dry powder material. Product Application Zhengzhou Dingli New Energy Technology Co., Ltd is the most professional, most authoritative enterprise in china, which is engaged in coal drying equipment research and development, which is the only Chinese coal slime drying industry set design, production, sales in the integration of science and technology enterprises. After nearly 20 years of rapid development,Dingli has gradually become the first brand of drying equipment industry in China .Company based on the lignite, washed coal such high moisture content coal, with the carefully technical research and practice, developed the coal rotary drying drum system,After 20 years drying experience and constantly improvement in the equipment design, with its advanced technology, high efficiency, low energy consumption, stable operation, convenient operation and maintenance, security, environmental protection,the product are well received by users, more than 100 sets of coal drying equipment running in China and all over the world. This type of equipment can be used for drying all kinds of coal, lignite, carbocoal, including anthracite, lean coal and poor lean coal, lean coal, coking coal, fat coal, air fertilizer coal, gas coal, coal and weakly caking coal, not sticky coal, long flame coal, lignite, coal washing, screening, raw coal, bituminous coal,the tail coal, middling coal etc. Equipment can be made according to the customers'
Lignite is a kind of low-grade coal, which is formed by peat diagenetic formation of humic coal, its the lowest degree of coalification, always present brown, dark brown, dim or asphalt luster color, no cohesive. Its physical and chemical properties are between peat and bituminous coal. High water content, high volatile, low density, containing humic acid, oxygen content up to 15 ~ 30%, easy to fragmentation, spontaneous combustion in the air. According to China's coal classification standards, they are divided into two categories: light transmittance PM 30 ~ 50% of the old lignite and PM less than or equal to 30% of the young lignite. Chinese and Indonesian lignite are mostly old lignite.
Control Valve 32f61-00062 FOR 320D C6 Injector ITEM:CAT 320D Control Valve 32f61-00062 Model No:32f61-00062 /32f61-00060 Engine model:C6.6; C6.4; Excavator model:320D 320D FM 320D GC 320D L 320D LN 320D LRR; Color:Black/ Sliver Net weight:0.05kg Material:High-speed Steel Certificate:CE , ISO9001 Packaging Details:1 piece/box (Nicole whatsapp008613358539802)China Lutong Parts Plant, is a professional OEM & aftermarket parts supplier which specialized in high quality diesel fuel injection parts & locomotive diesel engine parts with a long history, Our main products include Head Rotor(VE Head Rotor,Perkins Head Rotor),Diesel Nozzle, car injector nozzle,Diesel Plunger,Diesel Elements,Diesel Injectors,Delivery Valve,Cam Disk,Drive Shaft,Repair Kits,Feed Pump,Roller Ring,VE Pump Parts, Nozzle Tester,Test Bench,Common Rail Injector,Common Rail Nozzle,Common Rail Injector Control Valve.and so on. 1W5829 32f61-00062 CAT Actuating Pump M10 Check Valve common rail injector 0445110293 p type dsla 145 p 681 fuel injector nozzles p type injector nozzle 0 433 171 222 p type injector nozzle dlla 155 p 307 p7100 13mm barrels and plungers 13mm Barrel & Plunger Set for P7100 Pump
Fuel Press Limiter For ISUZU CVZ 6WF1 1. Product Name: Fuel Pressure Limiter 2. Isuzu Parts Number : 8-98032283-0 3. Truck Model : CYZ CYH EXR EXZ 4. Engine Model : 6WF1 6WG1 5. Pack Quantites : 1 pcs Advantages: 1. With more than 30 years experience for nearly all ISUZU vehicles, and we have professional checking system and tool books from Japan. 2. More than $5 million in stock both Genuine parts from Japan each year. 3. We are the biggest distributor of ISUZU GENUINE PARTS in Guangzhou. 4. If you can provide the Parts number to us , we can place the order from Japan . 5. We can assure the customer that the products is 100% Original Products.
SEKO Machinery 30% speed up precision industrial stainless steel tube mill machine specializes in industrial usage, like HVAC pipe fittings, sanitary tubes, water pipes, valve pipe fittings, petrochemical pipes, chemical industry, medicine industry, wine-making industry, petroleum industry, food industry, automobile industry, paper making industry, air-condition making industry and so on. Products dealed with our tube mill could reach ASTM, DIN, ISO, GB and JIS standard.
SEKO Machinery round/ square decorative stainless steel tube producing line specializes in decorative pipe and furniture usage. It could make stainless steel pipe used on furniture, guardrail and home hardware and bathroom fittings with high quality welding. It could also manufacture square tubes, special tubes and rectangular tubes for various household usage.
Small diameter carbon steel pipeline mirror polishing equipment is mainly composed of feeding stand, host,blanking stand ,host by lathe bed, horizontal roll support lugs, the vertical roll support lugs, the surface treatment grinding head, worm gear reducer, the main drive motor, and electric control system, etc.
(1) Performance - The mechanic recovery blasting room adopts mechanic recovery system to recovery abrasives and the abrasives can be chosen according to requirements. The abrasive usage is high and process productivity is also high. - The dust removing system adopts two stages dust removing, and the dust removing efficiency can reaches 99.99%. - The air flow in ventilation in this kind of blasting room can be adjustable to prevent the abrasives from entering cartridge filters. Thus it can reduce the lost of abrasives and can have a good dust removing efficiency. - The main electrical elements in this blasting room uses Japan/EU/USA brand. They have the advantages of reliability, safety, long life service and easy maintenances. - Use widely: It applies to middle and small size of blasting room to do pretreatment jobs such as rough, casting, welding, heating, steel structure, container, transformer shell, special parts and so on.
1. Type of Production Line Production capacity: 6 million sqm/year (Calculate by 24hrs/day and 300 working days per year) Power: 380V/50Hz; 3 phase Size of boards (L*W):1220mm*1830mm; Size of Finished product (L*W): 600mm*600mm Thickness:6-12 mm Films on front side of board: PVC films Films on back side of board: Aluminum films 3. Description of Machines 3.1Double-Side laminating Machine It includes gluing device,rolling device and flattening device. It can work with two side (front side PVC film, back side aluminum film) at same time, no need to turn it over. It is widely used for coating the surface of density board, multilayer plywood, joinery board, glass, acrylic, mosaic,all kinds of flat plate. 3.2 Dividing and Cutting Machine It includes vertical saw, horizontal saw, conveyor roller way, board-pushing device and so on. It also includes dust collecting system. Easy to operate, can divide and cut board into small pieces simply. With dust collector then make the working environment much cleaner. 3.3 Edge-Sealing Machine PLC and HMI control system, it can produce quickly and stably, with high efficiency; It is the professional edge sealing equipment which makes ceiling tiles. 3.4 Thermoplastic Packing Machine It includes two parts: edge sealing&cutting machine and shrinking machine, the product will be covered films and cut automatically, then go through shrinking machine and finish packing.
1. Type of Production Line Production capacity: 6 million sqm/year (Calculate by 24hrs/day and 300 working days per year) Power: 380V/50Hz; 3 phase Size of boards (L*W):1220mm*1830mm; Size of Finished product (L*W): 600mm*600mm Thickness:6-12 mm Films on front side of board: PVC films Films on back side of board: Aluminum films 3. Description of Machines 3.1Double-Side laminating Machine It includes gluing device,rolling device and flattening device. It can work with two side (front side PVC film, back side aluminum film) at same time, no need to turn it over. It is widely used for coating the surface of density board, multilayer plywood, joinery board, glass, acrylic, mosaic,all kinds of flat plate. 3.2 Dividing and Cutting Machine It includes vertical saw, horizontal saw, conveyor roller way, board-pushing device and so on. It also includes dust collecting system. Easy to operate, can divide and cut board into small pieces simply. With dust collector then make the working environment much cleaner. 3.3 Edge-Sealing Machine PLC and HMI control system, it can produce quickly and stably, with high efficiency; It is the professional edge sealing equipment which makes ceiling tiles. 3.4 Thermoplastic Packing Machine It includes two parts: edge sealing&cutting machine and shrinking machine, the product will be covered films and cut automatically, then go through shrinking machine and finish packing.
1. Annual output: 5million to 30 million sqm(based on thickness of 9.5mm gypsum board) 2. Working time: 24hours/day and 300 working days/year 3. Raw material: Gypsum powder, shielding paper, modified starch, foaming agent, glue 4. Fuel: Natural gas, diesel, heavy oil or coal 5. Product quality and specification: 1) The product is in compliance with National Standard GB/T9775-2008 2) Product specification: Length: 2400mm~3600mm Width: 1200mm or 1220mm Thickness: 8mm-20mm 6. Main process: 1)Raw material blending; 2)Shaping; 3)Wet board/panel conveying; 4)Drying; 5)Dry board/panel conveying; 6)Finished product stacking and storage. 7. Main technology: The production line adopts special designed hot air stove heating system 8.Raw material consumption list: (Based on 9.5 mm gypsum board for reference)
