Integrated water electrolysis hydrogen production equipment Hydrogen Production: 10Nm3/h Oxygen Production: 5Nm3/h Hydrogen Purity: 99.9 Oxygen Purity: 99.9 Electrolyzer Working Pressure: 3.2MPa Unit Power Consumption: Less than 4.8kW.h/N.m3 The integrated water electrolysis hydrogen production system is a hydrogen production system which integrates the electrolyzer, separator, gas-liquid processor frame and hydrogen drying device. The hydrogen production system and drying system are combined into one. The hydrogen production of a single equipment is 5nm3/h-10nm3/h, the purity higher than 99.99%, and the dew point is lower than - 60 degree Xiamen Zhongxinda Hydrogen Technology Co., Ltd. has been specialized in the design, R & D, manufacture and sales of water electrolysis hydrogen production equipment, hydrogen storage equipment, hydrogen bus bar and hydrogen purification device in various industries for many years. The hydrogen production capacity of the equipment produced by our company ranges from 2 m3/h to 1500m3/h.The hydrogen energy equipment of by-product hydrogen tail gas, peak shaving and frequency regulation of thermal power plant provide the design, production, installation and commissioning of hydrogen production, hydrogen storage, hydrogen production and hydrogenation station and technical services. Please feel free to contact us for any concern of yours, you will get our prompt response.
Integrated water electrolysis hydrogen production equipment Hydrogen production unit P/N ZXD-5/3.2 ZXD-10/3.2 Hydrogen production m3/h 5 10 Oxygen production m3/h 2.5 5 Operating pressure MPa 3 3 Hydrogen purity 99.8 99.8 Hydrogen dew point -50 -50 DC power consumption Kw-h/m3H2 4.9 4.9 Overhaul cycle of tank (Year) 5-10 5-10 Control Mode I II III IV I II III IV The integrated water electrolysis hydrogen production system is a hydrogen production system which integrates the electrolyzer, separator, gas-liquid processor frame and hydrogen drying device. The hydrogen production system and drying system are combined into one. The hydrogen production of a single equipment is 5nm3/h-10nm3/h, the purity higher than 99.99%, and the dew point is lower than - 60%�°C Xiamen Zhongxinda Hydrogen Technology Co., Ltd. has been specialized in the design, R & D, manufacture and sales of water electrolysis hydrogen production equipment, hydrogen storage equipment, hydrogen bus bar and hydrogen purification device in various industries for many years. The hydrogen production capacity of the equipment produced by our company ranges from 2 m3/h to 1500m3/h.The hydrogen energy equipment of by-product hydrogen tail gas, peak shaving and frequency regulation of thermal power plant provide the design, production, installation and commissioning of hydrogen production, hydrogen storage, hydrogen production and hydrogenation station and technical services. Please feel free to contact us for any concern of yours, you will get our prompt response.
Almost any material can be conveyed in dilute phase, suspension flow through a pipeline, regardless of the particle size, shape or density. It is often referred to as suspension flow because the particles are held in suspension in the air as they are blown or sucked through the pipeline
In dense phase conveying two modes of flow are recognized. One is moving bed flow, in which the material is conveyed in dunes on the bottom of the pipeline, or as a pulsatile moving bed, when viewed through a sight glass in a horizontal pipeline.
Capacity from 1 000 till 60 000 bottles or cans/hour; Product:; beer, kvass, juice, wine, carbonated and non-carbonated drinks; Material: stainless steel AISI 304, AISI 316L, AISI 316Ti, AISI 321. Whole process of pasteurization is fully automatic; Registration of pasteurization parameters (temperature and time parameters); Water exchange system between heating and cooling zones; System of opening and fixing of the upper lids allows easier access and simplifies the cleaning; Active container feeding system; Overload protection system; System of collection and return of condensate; Effective and an independent spraying system in each zone; Automatic monitoring and adjustment of PU; Alarm system; Creation of recipes Remote access via modem and the data transfer (profibus, internet, etc.).
Brand: Youzhijiamei Model: Y - 1 Commodity weight: customers customized Color: white Customizable in size, this industrial cable management channel neatly arranges cables in your office or server room while hiding cables for a clean, professional look. Professionally organized and wired cables with a slot design, this cable management channel protects cables from damage while neatly wiring them in an office or server room.
CH plasma power source is the series plasma power source can replace H brand and K brand high definition plasma power source series.
Available For All Kind Circular Loom, And Other Parts Also Available
Special chemical cleaner for cleaning airport runway. Order from us the highest quality chemical cleaning products that have no analogues in the world.
12 " cutter section dredger LOA - 24.5 M Breadth - 5.2 M Dredge depth - 8 M @ 37 deg Main engine Cummins - 28 G ( 500 KW) Main engine power - 666 HP @ 1800 rpm Dredge pump - India made @ Daman pumps - 300 mm (sucton ) Pump output - 120 cubic meters solids/hr
Chain Link Fencing Machine Manufacturer.
Rolling Shutter Strip Machine Manufacturer. 6-Roll Shutter Strip Machine. 7-Roll Shutter Strip Machine. 8-Roll Shutter Strip Machine. Automatic Rolling Shutter Strip Machine.
Commercial Folding Machine 1. High speed embedded microprocessor. More advanced than SCM (Single chip micyoco)270 rotation, Easy to control. 2. High speed pulse input to detect the speed and length of cloth, folding accurately. 3. Total error detection. 4. 10 automatic program for your choice, single channel and five-fold. Multi-channel and two-fold. apply to many kinds of cloth. 5. Password protection to prevent parameters being changed. 6. I/O testing function. 7. Multi-lauguage menu. 8. Check-up speed of machine running. 9. Static eliminator available to avoid static generation. Specification:  Model ZD3000-V ZD3300-V Max Folding LxW(mm) 3000x3000 3300x3000 Max Speed(m/min) 50 50 Layers(layer) 5 5 Air Pressure(Mpa) 0.7 0.7 Rated Input Power(kw) 1.87 1.87 Dimension(mm) 3650x1600x1750 4000x2300x2000 Total Weight(kg) 1430 2200
Features: 1. Lenovo PC , windows 7 operation system, Chinese-English interface screen. 2.All production data will be backup automatically,which is suitable for the ISO9000 management. 3.Fault Intelligent Diagnosis,display alarm and list out. 4.15% heat transferring efficiency was improved ,which is more suitable for the LEAD-FREE welding process. 5.Guide rail is through the special heat treatment, it's hard to out of shape. 6.The main hanging is reinforced, which can avoid the deforming and PCB jamming. 7. Siemens PLC control, more durable and stable. Product Name Competitive Price Reflow Soldering Oven PCB Reflow Soldering Machine From China Model HS-0802-LF Specifications about heating system Quantities of heating zones Top8 /bottom8 Length of heating zones 3500mm Quantities of cooling zones Up 2 ,Down 2 Specifications about conveyor Width of conveyor 50~400mm Max width of PCB 400mm Conveyor direction R to L (option: L to R) (customized) Fixing conveyor rail Front rail fixing/rear rail fixing (customized) Height of conveyor 900±20mm Conveyor Chain conveyor and meshwork conveyor Conveyor speed 0~2000mm/Min Specifications about controlling parts Power 5 line 3phase 380V 50/60HZ with UPS delay power off Total power 50KW Start power 26KW Normal working consume power Approx. 4.7KW Heating time Approx. 20min Temperature range Room temperature~~~350 Controlling way PID closed loop control, SSR drive Temperature control accuracy ±1 PCB temp. Deviation ±1.5 Abnormal alarms When temperature is abnormal(too high or too low) & When the PCB board drops Signal lamp 3 lamps: yellow-rising; green- constant; red- abnormal Cooling System Cooling method Forced air /Air cooler is option Specifications about machine Dimensions(mm)L*W*H 5400*1370*1555mm Weight (Approx.) 2200kg
Model Number Outer Dia.(A)mm Inner Dia.(B)mm The Max Wall Thickness Reamed Dia.(C)mm Eccentric140-HD45-115 168 156 6 185 Inner Dia. of Casing Shoe(D) mm Inner Dia. Of casing shoe that pilot bit can pass through Type of Hammer Recommended Hammer Type(E) Drill Pipe mm 142 140 DHD350 DHD350R,QL50 HD55 76/89
How does it work? Nowadays, the drum separator is used in the iron ore mining industry. But it can not produce high-grade iron concentrate because it can not remove the locked-particles and gangue in the agglomeration formed in the process of magnetic separation. The RY series Pules Electric Separator works in a better way. It can break the locked-particles and removes the gangue from the agglomeration. When the iron ore pulps pumped into the vertical selection drum, the magnetic granule will be affected by three different forces: Pulsed Electric Field Force(which is generated downward continuously ); Gravity; Impulsion force (from the ascending water which is continuously pumped from the bottom of the machine). Under the combination of those three forces, the high-grade iron ore concentration will be formed and turned into a refined Magnetic Chain, which suspended descending to the tank bottom, automatically push to the next procedure. Because of the effective leveled evenness electric magnetic field, the refined Magnetic Chain keeps vertical, which will not agglomeration on the drum wall. The gangue, which is surrounding by the Magnetic Chain, will be pushed up by the ascending water and overflow in the top, going away as tailing. Pules Electric Separator is an automatic running iron ore separating machine which is developed by our own design electric control System. According to the data collecting from the running machine, the system will analyze and process the information, after that, it can give orders to the magnetic field, electric valves for accomplishing fully automatic unmanned control. We have applied this System for many factories and sites, the rich experience will help our customers to get more benefits. One button start, continuous running, You with Us to great!
Output of oil, water, and gas of oil wells are the most basic production parameters for oilfields to increase revenue and reduce expenditures, and realize intensive and digital production. However, due to different nature of the crude oil of each well, there are huge differences in fluid production, gas production, separated water , as well as the irregularities of oil well fluids and other complex factors, thus it is difficult to find a simple operation with strong adaptability, and measurement accuracy at home and abroad, which severely restrict improvement of the information construction and intensive management of the oil field. Our credible three-phase oil measurement technology is for this problem, especially for those oil wells that enter the high water period or high gas content.
The automatic cleaning line for used oil barrels uses high-pressure hot water to clean the inner and outer walls of the barrel at 360 degrees without dead angles . After air-drying, it can be further repaired and then sold as a container. The whole system includes Check line Outside cleaning line Internal cleaning line Airdry Repair line Oil-water separation device Sewage purification and reuse device Processing capacity: 20-200 per hour, can be customized
The used lubricating oil vacuum distillation device designed by our company has the following characteristics: With high vacuum distillation method, the base oil components can be distilled at 340 C, which is far lower than the current popular domestic used oil vacuum distillation of 380-400 C, which effectively avoids base oil molecules cracking at high temperature , reducing production of light oil like naphtha, improves the quality and yield of base oils, and decreases risk of plant operation. Using automatic continuous operation, during normal operation, only one person per shift can complete the control. The heating system adopts electromagnetic heating, no open flame, and high safety. The plant runs with low energy consumption, processing every ton of used oil, and the energy consumption required for heating is only about 200,000 kcal. Modular design, the on-site installation and commissioning cycle is greatly shortened. For the daily processing capacity of less than 20 tons, the whole set of equipment including heating, heat exchange, condensation, vacuum, atmospheric distillation, vacuum distillation, refining, compounding, control, circulating pool, cooling water tower, operating platform, etc. It can be transported by a truck. Small footprint. Taking the processing capacity of 10 tons/day as an example, the overall area of the device is only 28 square meters (4 meters x 7 meters). Quality of the product is good, and quality of the product produced has been tested by quality inspection department and meets the new lubricating oil quality standard.
SBS Modified Asphalt Complete plant (Mobile, Fixed) System Module: The production and processing of SBS modified asphalt must be carried out within a certain temperature range, which is determined by experiments with different grades of asphalt. Matching domestic high-quality thermal transfer oil heating furnace, pneumatic valve, temperature controller, heat-conducting oil, burner and program controller imported from Germany or Japan adopted to ensure the constant temperature control. Through automatic combustion and stop of heating furnace, circulating of heat-transfer oil, automatic opening and shutting of pneumatic valve, the heat is sent to each heating part and set by the temperature controller, so as to achieve temperature control automation. In order to meet the needs of different asphalt processing, complete set of equipment can be equipped with stabilizer adding device and auxiliary agent adding device. After the stabilizer is metered, the pump is directly added to the swelling tank. After grinding and reaction, the SBS particles and the asphalt can be combined tightly together, they can prevent segregation for a long period of time. The additives are added to the incubation tank after being metered when needed, which can effectively improve the performance indexes of the modified asphalt.
