Light Medium Machinery Suppliers and Manufacturers

Sp(0.3-3.0) steel coil slitting machine manufacturers Coil thickness: 0.3-3.0mm Coil width:400-2000mm Productin speed:20-120m/min Pipe material: hr, cr, ppgi, gi, al, cu, etc Product description: sp(0.3-3.0) steel coil slitting machine manufacturers is applicable to coils of various specifications with the thickness of 0.3-3.0mm and width 500-2000mm. It can produce hr, cr, ppgi, gi, al, cu. Sp(0.3-3.0) slitting machine is applicable to coils of various specifications. It is used for slitting the coil into required width for the use of punch line through the procedure of uncoiling, pre-leveling, cropping, slitting and recoiling. It has advantages such as proper layout, easy operation, highly automated and high production efficiency. 1. Technical parameters Model,Thickness,Coil width,Coil weight,Coil o.D,Coil o.D,Strip width,Number of stril Mm, Mm, Tons, Mm, Mm, Mm, Pcs, Sp(0.3-3), 0.3-3.0, 400-1600,20, 508, 610, 2000,,30, 8~20, Sp(1-6), 1-6, 500-2200, 25, 508, 610, 760,2200,,50, 5~15, Sp(2-10), 2-10,500-2200, 35, 508, 610, 760,2200,,50 3~10, Sp(2-12) 2-12,500-2200, 35 610, 760, 820,2200,,80, 3~10, Sp(5-20), 5-20 500-2300, 35, 610, 760, 820,2500,100, 2~8

Bench Top Ribbon Cable Terminal Crimping Press Technical Parameter Size:260*300*780mm(L*W*H Weight:80KG Power Source: Single Phase 220VAC/ 50/60HZ,10A Display: Chinese/English (English refers to user manual) Total Power:550W Cylinder Pressure:0.4-0.7MPaadjustable Working Efficiency: 12000 crimps/hourcauculated as 12Pins above ribbon cable) Appropriate Wire: 0.8-2.0mm,AWG20-28, Red Blue White FBC2468,Grey FBC2651,Color FBC and etc 2-40pins Cutting Length:>70mm Ribbon Cable Split Length: 30mm Crimping Strength: 1.5T

Available Wire: USB Cable, Power Cord, Headset Cord, Audio Cable Feature of Mute High Speed Wire Stripping Terminating Machine High speed: Every 0.2 seconds terminating speed Working method: foot pedal, motor work. Computerized control. Very easy to change die., Energy Saving Stripping and Terminating can be finalized at the same time. Description of Mute High Speed Wire Stripping Terminating Machine Model No.: LL-A2.0 Working Voltage: 220V-50HZ Power: 750W Crimping Force: 2.0TON Weight: 85KG Stroke: 30MM Size: W300XD280XH450 (mm) Safety Device: TDC Sensor

Multiple purpose,it can crimp different terminals with different crimping die sets. The common type or pressure protected type foot switches are for selection. This pneumatic terminal crimping machine is equipped with pressure regulator to ensure precise crimping. Light, portable,easy and quick crimping to ensure high efficiency operation. This new style pneumatic ferrules crimping press can crimp about 1200 times per hours. Parameters: Model No.: FEK-30J Net weight: 4.8KG Output: 2.0T Air pressure scope:0.5-0.7MPa Dimension:286x125x165mm

IDC Connector Crimping Machine The clamp of IDC connector crimping machine is adjustable, there are two kinds of specifications, the one with 1.0 maximum spacing can crimp 64P, the one with 1.27 maximum spacing can crimp 50P, 1.0 or 1.27 spacing fixture will be sent with machine at ramdon, if two specifications of fixtures both needed, pay USD100 in addition. Characteristic description: 1 for the 8P-64P IDC connector crimping machine take place of hand pliers, output of high efficiency, stable quality and simple operation. 2 minimum gas consumption, low failure rate, easy maintenance. 3 with bakelite base use, simple operation, abrasion resistance, high precision. 4 suitable for crimping cable with IDC products. 5 automatic crimping the product which is feeded in, finalization and the cylinder reset, easy to operate. 6 according to the product type can be pressed 300-600 times per hour. 7 addopt 6-8kg pressure, 220V power supply 8 the body all the use of steel for operation, solid and durable, external chrome, beautiful without rust 9 Distribution a set of bakelite crimping adjustable block 8-40P (OEM is acceptable.) Technical Parameters: Model No.: FSHS-50 Voltage AC220V Weight 14KG Appearance size 250x200x330mm Press P number 4-40P a fixture /40-64P a fixture

MODULAR PLUG Automatic Terminal Machine / RJ45 Crimping Machine Available in 220V/60hz or 110V/50hz power. Motor: 60 watts. Compact easy relocate Features: Apply to general modular cord plug or UK type plug A quiet and highly reliable direct motor drive Easy to setup, operation Interchangeable tooling for different plugs UsageDedicated to crimpTelephone CableorNetwork Connector RJ45 Application2P2C-8P8C Crimping500kgs Stroke25mm Voltage220V/50Hz 110V/60Hz Size300Ã?160Ã?160mm Weight12Kg

Single Granule Terminal Crimping Machine This single granule terminal crimping machine(benchtop crimping press) adopts high-tech inverter technology, electronic precision positioning, avoids traditional terminal crimping machine clutch electromagnet common failure. Characteristic Description v Power saving environmental protection, motor runs when machine is working. v Machine mould continuum, no need to change mould, quick save time. v Voltage stability, speed, high accuracy. v Suitable for crimping computer terminal, DC terminal, single grain terminal, joint terminal. v Light and handy structure, easy moving workplace, mute operation. Specifications Model No. LL-1.0T LL-1.5T LL-2.0T LL-3.0T LL-4.0T MaxPressure 1 Ton 1.5Ton 2.0Ton 3.0Ton 4.0Ton Mold Type Fixed Mold OTP Mold,#2000 Mold, JST Mold etc Power Supply 220V/50Hz Air Pressure Full Electric, No need air compressor Power Rating 250W 550W 750W 1000W 1500W Net Weight 25KG 35KG 50KG 55KG 75KG Size (MM) 250x210x460 280x250x600 320x280x650 320x280x660 350x320x720

Fully Automatic Double Wires Three Terminals Crimping Machine Feature: (1): high degree of automatic mechanical equipment, through the simple training ordinary worker can operate two fully automatic numerical control terminal crimping machines for crimping three terminals to splice two wires. (2): design adopts modular design, easy to adjust the machine, the use of standard parts, low maintenance costs; the use of high-end electrical control, independent development programme, man-machine interface, easy to learn, easy to operate. (3): high efficiency, stable and intelligent. (4): full automatic numerical control terminal crimping machine for crimping three terminals of two wires adopts touch screen full digital design. (5): parameters such as, cutting length, stripping length, cutter value, half stripping value, depth of crimped insulation and so on, can be operated on touch screen, and adjust the electric cutter design, improve the production efficiency, is currently the highest degree of automation, with the highest efficiency model in the market.

Fully Automatic Gold Plated Contact Wire Terminal Crimping Machine Equipped with reliable high-precision technology, CM-D01 uses a compact module design, the highest speed of processing can be up to 5000pcs per hour, a variety of configuration options can be directly processed wire harness from AWG18 to AWG28, use the optimal combination of components to ensure excellent productivity. Feature: Compact modular design, greatly reducing the machine footprint. High-end and high-precision components ensure reliable quality. Easy operation can be realized through touch screen and iconized KINCO software. Can be a one-time rapid completion of wire cutting, wire stripping, lug crimping, wire twisting. Speed, high output, a greater limit for the enterprise to save labor. Description: Product Type: CM-D01 Name: Gold Plated Contact Wire Lug Crimping Machine Product Features: Double-ends wire cutting, stripping, one end crimping, the other twisting, can be full stripped and half stripped. Appearance size: 700 long X600 wide X1500 high (MM) Machine weight: 213KG (including wooden box package) Display: digital LCD touch screen Run mode: automatic operation + manual operation Adjust the knife way: electric knife Tool material: Sweden ASP60 powder high speed steel Pneumatic accessories: Original Asia off Screw Guide: Taiwanâ??s original silver Cutting line length: 20mm-999999mm Cutting line tolerance: change range 0.01mm + cut length x0.2% or less Stripping length: 0.00MM-12.00MM Suitable wire: AWG18-AWG28 Cutting line speed: about 7600 / hour Processing capacity: about 4200 / hour Terminal pressure: Standard 2.0T, other crimp force need to order Air pressure: 5KG (requires stable and dry air) Configuration Power: AC220V Rated power: 0.75KW Detection device: 1. Lug detection; 2. Wire detection; 3. Crimp detection; 4. Air pressure detection

This automatic flat ribbon cable strip cut split machine using the hybrid drive microcomputer LCD display control system, cutting, stripping and both-ends splitting in red white flat ribbon cable, blue white flat ribbon cable, gray flat ribbon cable, double flat ribbon cable can be finalized in one time,computer control both-ends splitting length, does not require the replacement of mold, operation is simple and easy to understand. Technical Parameters Mode BJ-900+T Function Flat ribbon cable cutting, both-ends stripping and splitting, intermediate stripping Applicable Wire Range 2 Pins-12Pins Processing Speed 2000-4000 pieces per hour (decide by wire material) Cutting Length 0.1mm-99999.9mm Intermediate stripping nos. 13 strips Stripping Length Stripping wire head: 0.1-25mm Stripping wire tail:0.1-20mm Accuracy of entry & outlet wire motor Mute hybrid stepping motor 0.1mm per step Remark Function Auto-entry wire, Auto-outlet wire, timing start Driving Mode Six wheels driven Dimension 510X340X340MM Net Weight 40KG Cutter Material Import tungsten steel/Highspeed steel

This fully automatic wire cut strip forming machine uses hybrid drive microcomputer full LCD control system, for car wiring harness,electricity,power distribution box,battery box and other industries, cutting, stripping, dual direction 30 degree to 90 degree forming. Model No. BJ-900 (16 mm2) BJ-900 (25 mm2) BJ-900 (6 mm2) Function Wire cutting,stripping,bending Cutting Wire 0.1-16mm2 0.1-25mm2 0.1-6mm2 Production/Speed 200-800 pcs/hour (decided by wire) Cutting Length 0.1-99999.9mm Stripping Length Wire head:0.1-50mm Wire tail:0.1-20mm Wire head:0.1-30mm Wire tail:0.1-20mm Stepper Motor Accuracy Mute hybrid stepper motor 0.1mm per stepping Remark Function Automatic inlet wire, automatic outlet wire,timing start Driving Mode Four wheels driven Two wheels driven Machine Size (mm) 530(L)x420(W)x370(H) 420(L)x297(W)x345(H) Machine Weight 38kg 30kg Blade Material Import tungsten steel/highspeed steel

(round sheathed cable, flat sheathed cable, coaxial cable) This fully automatic flat sheathed cable stripping machine uses hybrid drive, SMC pneumatic components, microcomputer full LCD control system, with a wheel function to improve the length and stability of the stripping length. ) flat sheathed cable: outer jacket and insulation of core wires can be one-time processing completed. ) round sheathed cable: outer jacket can be stripped only. Stripping Flat Sheathed Cable Stripping Round Sheathed Cable: Model No. BJ-900 Function Wire cutting, both-ends stripping, middle stripping Applicable Wire Size 0.1-10 Sq.mm (AWG32-AWG10) Speed 1000-4000 pieces per hour (decided by wire) Wire Cutting 0.1-99999.9mm Stripping section 13 Wire Stripping Strip front: 0.1-250mm Strip tail:0.1-70mm Motor accuracy 0.1mm per step by mute stepper motor Function Automatic wire inlet/outlet, timing start Driven Mode 4 wheels Machine Size 420(L)mmx297(w)mmx345(H)mm Net Weight 28KGS Cutter Material Imported Tungsten Steel or High speed Steel

Automatic cut-to-length thick wire stripping machine Product Feature: The machine adopts hybrid driven microcomputer LCD screen control system, in the processing range can be arbitrarily set the length of the cutting line, stripping length, has quantitative andtiming start function. Specialized for thick wire or cable , especially for BV, BVR cable wireprocessing used in the automotive, power distribution box. Mode BJ-900 BJ-960 BJ-980 Function Wire Cut, Both-ends Strip, Intermediate Strip Wire Cut, Both-ends Strip Cutting wire core 0.1-25 mm2 (BV 16mm2, BVR 35mm2) 0.1-50 mm2 (BV 16mm2, BVR 35mm2) 0.1-50 mm2 (BV 25mm2, BVR 50mm2) Production Capacity 1000-4000 wires/hour(decided by wire type) Cutting Length 0.1mm-99999.9mm Intermediate strip no. 13 strips Stripping Length Strip front 0.1-50mm Strip rear 0.1-30mm Strip front 0.1-250mm Strip rear 0.1-120mm Strip front 0.1-250mm Strip rear 0.1-120mm Accuracy of inlet outlet motor Mute Hybrid Stepping Motor 0.1mm per step Remark Function Auto-outlet, Auto-inlet, Timing start Driving Mode 4 wheels 6 wheels 8 wheels Dimension 420X297x345MM 530X420x370MM 570X420x400MM Net weight 35KG 35KG 45KG Blade material Import tungsten steel/Highspeed steel

Product Features: 1. BJD805 is designed for wire cable processing, max cutting cable 95 square mm, this machine is suitable for BV, BVR cable cutting stripping used in power station, electric meter box and automobile industry, car charging column and etc. 2. Advantages: dual motors send the wires simultaneously makes the feeding wire stabler, more accurate size. 3. Adopts PLC programming, automatic computer mouse operation, 7 inch touch screen, simple, easy to operate. Technical Parameters Mode Automotive Wire Stripping Machine BJ-D805 Function Wire cut, both-ends strip Cutting wire core Dia 18MM 100MM2 below Production Capacity 400-1000 pcs/hour (decided by wire type) Cutting Length 1mm-9999mm Stripping Length Strip front 0-50mm,strip tail 0-50mm Accuracy of inlet outlet motor Mute hybrid stepping motor 0.1mm per step Remark Function Auto-outlet,auto-inlet,timing start Driving Mode 8 wheels Dimension 755X550X510MM Net Weight 121KG Blade Material Import highspeed steel

This pvc wire cutting and stripping machine uses a hybrid drive microcomputer full LCD operating system, cutting, stripping, one time completion, but also the front half stripping with twisted wire, protect the integrity of the wire, special wire can instantly change the size of wire specifications. Model No. BJ-600 BJ-650 BJ-800 BJ-880 Main Function Cut wire,both-ends stripping Cut wire,both-ends stripping,intermediate strip, (wire twisting for BJ-880) Cutting wire core 0.1-4.0mm2 (30AWG-14AWG) 0.1-4.0mm2 (30AWG-14AWG)x2 0.1-2.0mm2 (32AWG-14AWG)x2 0.1-2.5mm2 (30AWG-14AWG)x2 Processing Speed(decided by wire material) 2000-8000 pcs/hour 4000-16000 pcs/hour 2000-8000 pcs/hour Cutting Length 0.1-9999.9mm No. Of Intermediate Stripping 0 13 Stripping Length Strip head: 1-30mm Strip tail: 0.1-15mm Strip head: 1-30mm Strip tail: 0.1-30mm Strip head: 1-50mm Strip tail: 0.1-30mm Strip head: 1-30mm Strip tail: 0.1-20mm Accuracy of outlet inlet motor Mute hybrid stepping motor 0.1mm per stepping Other functions Automatic wire inlet & outlet, timing Driving Mode 4 wheels Dimension(mm) 380x250x320 420x297x345 420x297x345 420x297x345 Net Weight 25 28 32 35 Blade Material Import Tungsten Steel/High speed steel

Fully Automatic Round Sheathed Cable Cutting Stripping Machine Model No.: DM8500 Wire cutting capacity: 50mm ~ 9999mm Processing diameter: 3.0-8.0mm Cutting depth unit: 0.01mm Processing efficiency: 400-700pcs per hour (depended by wire ) Maximum capacity of sheath stripping: left rear: 45mm / right rear: 100mm Shortest sheath stripping length: 35mm Dimensions: 560X690X400mm Weight: 102KG Power: AC220V 50 60HZ Power: 500W 1. This machine is suitable for processing multi-core power cord and special single-core wire; 2. wire cutting, stripping jacket, stripping core wire and other complex work order can be completed on the machine, to maximize the saving labor costs and improve processing quality; 3. The mobile blade holder, cutting, stripping were used different tools to complete, cut neatly, stable stripping quality; 4. Up to 100 groups of storage capacity, so that a variety of data processing intact, retrieved at any time! Economical alternative is Pneumatic Jacket Multicore Wire Stripping Machine

Model No. SWTâ??508E SWT508-JE SWT508-JE2 Power AC220/ 50HZ Motor Rated 300W Rated 500W Display English/Chinese Cutting Length 1-9999 mm Stripping Length (mm) Wire Head 0-35 Wire Tail 0-15 Wire Head 0-50 Wire Tail 0-50 Cutting Tolerance ± (0.002xL)mm ± (0.002xL)mm ± (0.001xL)mm Middle Stripping 11 sections 16 sections Cut core cross-section 0.1-8 SQMM 0.2-10 SQMM Catheter Max. Diameter  10  13 Appropriate Wire PVC Wire, Teflon Wire, Glass Wire PVC Wire, Teflon Wire, Glass Wire, Multistrand steel wire Blade Material Hard Tungsten Steel Production (piece/hour) 3000-5000 4000-7000 Drive Mode 4 Wheels

Model No. SWT508C SWT508-SD SWT-SDB SWT508-SDB2 Power AC220/ 50HZ Motor Rated 160W Rated 200W Display English/Chinese Cutting Length 1-9999 mm Stripping Length (mm) Wire Head 0-35 Wire Tail 0-15 Wire Head 0-50 Wire Tail 0-30 Cutting Tolerance (0.002xL)mm Middle Stripping 11 sections Cut core cross-section (SQMM) 0.1-2.5 0.1-4.5 Single wire0.1-4.5 Double wires 0.1-2.5 Catheter Max. Diameter 6 Appropriate Wire PVC Wire, Teflon Wire, Glass Wire Blade Material Hard Tungsten Steel Production (piece/hour) 3000-8000 3000-8000 5000-10000 4000-10000 Drive Mode 2 Wheels 4 wheels

Model No. SWT508-MAX SWT508-MAX1 SWT508-MAX2 Power AC220/ 50HZ Motor Rated 500W Rated 800W Rated 1000W Display English/Chinese Cutting Length 1-60000mm 1-100000mm Stripping Length (mm) Wire Head 0-50 Wire Tail 0-50 Wire Head 0-100 Wire Tail 0-100 Wire Head 0-150 Wire Tail 0-150 Cutting Tolerance ± (0.002xL)mm ± (0.001xL)mm Middle Stripping 13sections 16 sections Cut core cross-section 0.2�16mm2 0.3�25mm2 0.3�25mm2 1�70mm2 Catheter Max. Diameter ￠13 ￠18 Appropriate Wire PVC Wire, Teflon Wire, Glass Wire, Multistrand steel wire Blade Material Hard Tungsten Steel Production (piece/hour) 16SQMM2000-3000 25SQMM 3000-4000 4000-5000 5000-6000 Drive Mode 4 wheels 8 wheels 8 wheels independent drive

Model No. SWT508-HT SWT508-HT2 SWT508-BHT SWT508-BHT2 Remark Process round sheathed cable, out diameter