Specifications: Engine power: 3 kw Reductor engine. System: reductor +hydraulic Controlled by plc automation System 100% digital Programming Air supply required (4 bars) Safe and fast production with strong body structure Materials that will be used for ring: from 12x12 square, 100 diameter and 120 mm. Diameter ring materials that will be used for twist: square 12, 14 maximum 150 cm. Materials that will be used for cone: 12, 14, 16, 18, 20 Cone capacity average 1000 pcs/ 24 hours Dimension(length*width*height): 200 x80 x130 cm Weight: 800 kg
Motor Power:11 Kw. Reductor motor Output pull out motor power: 1,5 Kw Reductor Brand: Yılmaz Speed Control: 22 Kw Straightening system: Runners and roller system Speed: 0 - 80 cycle speed control (Maximum Speed 2000 m./hr) Requires air supply (4 bars) Highest qualitymotor Strong body structure Separate straightening unit to ensure perfectly straight output Requires only one worker to feed in material. Output is pulled out by automatic motor and rolls Easy adjustments 2 years warranty for mechanical defects Dimension(Length*Width*Height): 180 x200 x140 cm Weight: 2000 kg Roller diameter: 160 x 36 mm. Roller Amount: (4 pieces) rollers for 6x12,12x12, 14x14, 16x16 (4 pieces.) Rollers for 20x5, 20x10, 30x5,30x10,40x5,40x10 Lama (2 pieces.) Double line roller 30x10-5 Lama (2 pieces.) Double line roller 40x10 -5 Lama (1 piece.) Flat roller (4 pieces.)
Engine power: 3 kw System: hydraulic pneumatic End rolling material: 6x12, 10x10, 12x12, 16x8, 20x10, 20x5, 30x10, 30x5 Automatic and manual rolling function with hydraulic pistons Capacity: 500 pieces / 8 hour Dimensions: (length*width*height): 120 x60 x150 cm Weight: 350 kg
Engine power: 3 kw System: hydraulic Capacity: average 2000 pcs/hour. Clamp variations (12, 18, 24, 36) Dimension(length*width*height): 80*70*170 Weight: 400 kg
Engine power: 3 kw System: hydraulic Capacity: 1 piece / second Clamp variations (12.18, 24) Dimension: (length*width*height): 100*70*170 cm Weight: 450 kg
Country of origin: republic of turkey Engine power: 5.5 kw System: reductor engine (40 output) Material: steel material Weight: 500 kg Capacity: average 800 pcs/hour Materials: (6x12 cold), (12x12, 20x5, 30x5, 40x5 hot) Roll diameter: 160 mm Roll width: 100 mm Roll steel quality: 2379 60 hrc hardness Dimensions (length*width*height): 100*80*150 Note: Ultra long molds lifetime High quality steel used for molds
the agitator makes the liquid and gas medium forced convection and homogeneous mixing devices. The type, size and rotational speed of the agitator have an influence on the distribution of the mixing power between the overall flow and the turbulence pulsation. Generally speaking, the power distribution of turbine agitator is favorable for turbulent pulsation, while propeller agitator is favorable for overall flow. For the same type of agitator, in the same condition of power consumption, the large diameter and low rotational speed agitator, the power consumption is mainly consumed in the general flow, which is beneficial to the macro mixing. Small diameter and high speed agitator, the power is mainly consumed by turbulence pulsation, which is conducive to micro mixing. The amplification of the agitator is a complex problem related to the process process, which can only be amplified by step by step, and extrapolated to industrial scale according to the obtained amplification criterion.
Double Liner Metal Roof Tile Making Machine Function and feature This producing line uses galvanized steel sheet, colored armor plate or aluminum plate as the material plate. The products of it are used as the roof tile and wall panel outside of building, to increase the beauty and durability of the roof tile and wall panel. This line has no limit on processing length; you can set several different data on the computer control cabinet according to your own need. After pressing the button "Confirm", the machine can produce the panel automatically according to the set data. The molding plate surface smooth and not easy to be marked when it is being stamped. So it is easy to install. The product conforms to National Steel Construction Building Standard.
Ave-t Production capacity: 50-500l Standard: gmp, fda hegiene standard Material: sus316l, sus304 Application: cosmetic, pharmaceutical, food, chemical Function: mixing, homogenizing, heating, vacuum, hydraulic lifting etc Voltage: 220-480v/50-60hz triple phase Mixing: single ways or bidirectional mixing Homogenizer: bottom type, upper type and circulation type
Ave-a vacuum emulsifying mixer consists of main pot, water / oil tank, hydraulic lifting system, plc control system, homogenizer, mixing system, vacuum system. When the materials are under the vacuum condition, it makes use of the high shear emulsifier to distribute one or several another continuous phase rapidly and evenly. The materials will be processed in the narrow space between stator and rotor by strong energy of motion produced by the machine effect. By the operation of hydraulic shearing, centrifugal extruding, impacting, breaking and turbulence for over 199 thousand times per minute, the materials will be dispersed and emulsified instantly and evenly. After reciprocating circulation at high frequency, the fine finished products of stable and high quality without bubbles will achieved.
Ave-f vacuum emulsifying mixer consists of main pot, water / oil tank, homogenizer, mixing system, vacuum system. When the materials are under the vacuum condition, it makes use of the high shear emulsifier to distribute one or several another continuous phase rapidly and evenly. The materials will be processed in the narrow space between stator and rotor by strong energy of motion produced by the machine effect. By the operation of hydraulic shearing, centrifugal extruding, impacting, breaking and turbulence for over 199 thousand times per minute, the materials will be dispersed and emulsified instantly and evenly. After reciprocating circulation at high frequency, the fine finished products of stable and high quality without bubbles will achieved
Ave-a vacuum emulsifying mixer consists of main pot, water / oil tank, hydraulic lifting system, plc control system, homogenizer, mixing system, vacuum system. When the materials are under the vacuum condition, it makes use of the high shear emulsifier to distribute one or several another continuous phase rapidly and evenly. The materials will be processed in the narrow space between stator and rotor by strong energy of motion produced by the machine effect. By the operation of hydraulic shearing, centrifugal extruding, impacting, breaking and turbulence for over 199 thousand times per minute, the materials will be dispersed and emulsified instantly and evenly. After reciprocating circulation at high frequency, the fine finished products of stable and high quality without bubbles will achieved
Ave-b vacuum emulsifying mixer consists of main pot, water/ oil tank, hydraulic lifting system, plc control system, homogenizer, mixing system, vacuum system. When the materials are under the vacuum condition, it makes use of the high shear emulsifier to distribute one or several another continuous phase rapidly and evenly. The materials will be processed in the narrow space between stator and rotor by strong energy of motion produced by the machine effect. By the operation of hydraulic shearing, centrifugal extruding, impacting, breaking and turbulence for over 199 thousand times per minute, the materials will be dispersed and emulsified instantly and evenly. After reciprocating circulation at high frequency, the fine finished products of stable and high quality without bubbles will achieved
We are the reputed supplier and importer of Universal Testing Machine in India - Contact us now to Get Quick quote for Universal Testing Machine in India by JJ Test. This device is ideal for measuring tension, compression, bending, peer and tear in plastics, metal wires, nylon wires textile, packaging etc.
We are the reputed supplier and importer of UTM-0400 Electronic Tensile Machine in India - Contact us now to Get Quick quote for UTM-0400 Electronic Tensile Machine in India by JJ Test. This device is designed to measure stress, yield elongation, breaking stress, breaking elongation and tensile strength for plastic and ruber
We are the reputed supplier and importer of High & Low Temperature Universal Testing Machine in India - Contact us now to Get Quick quote for High & Low Temperature. This device is used for testing materials under variety of temperature conditions.
This line can be set according to Customers'need, length is positioning Controlled by computer. It can be exactly Positioned, and shown timed on the Touchscreen, as well as automatically count And revise. This line suitable to process Outer side of sandwich panel, materials sheet Are colored steel sheet, aluminium steel Sheet, stainless steel sheet and so on. The Inner side materials are flame retardant eps, Rock wool and so on. Multifunctional colored steel sandwich panel Producing line This line adopts advanced technique, which Integrates gas, electricity and machinery, and This line is the special equipment for Processing colored steel sandwich panel. Its Working speed can be adjusted by frequency Converter, and it can process sandwich panel At one time. The whole line consists of Decoiler, molding core, compound part(knocking Our the groove, glue instillment, heating, Compound, rolling, grooving, finishing, air- Powered, automatically cutting). It is a Necessary equipment for producing industries Factories, roof tile and wall panel of Warehouse. Technique parameter: Voltage: 380v/50-60hz Power: 32kw Productivity: 0-4m/min Material with:1000mm, 1200mm Material thickness: 50-250mm Annual output: 600, 000m2
Storage Shelf Rack Cold Metal Forming Machine The equipment is consisted with auto-de- coiler, guide frame, lever/feeding section, continuous bottom hole punching section, forming section, positioning and cutting section, collection table and electrical control system etc. Shelf forming machine is . According to market demand by the collection year production cold rolling equipment experience independently designs a series or products. Product: Shelf column, Shelf crossbeam, Shelf stay rod, Shelf plywood etc. Features of this Shelf Rack Making Machine lower cost high efficiency reliable working low energy consumption Components of the Shelf Rack Rolling Forming Line 1. Steel strip supporting frame 2. Feeding platform 3. Automatic shearing system 4. Hydraulic system 5. Steel strip unfolding system 6. Computer control system (imported computer) 7. High-precision automatic counter 8. Receiving table Cangzhou Automatic Metal Storage Rack Shelf Rollforming Equipment ,·Manual uncoiler frame in different tons ,·Hydraulic automatic uncoiler Cangzhou Automatic Metal Storage Rack Shelf Rollforming Equipment 1. Ground-level land 2. 5T overhead travelling crane 3. Space for storing the material 4. Space for laying the machine 5. Road for vehicle moving 6. Workman: 2, operator and porter
1.The main components Manual decoiler Main forming machine Plc control system Hydraulic pump station Post cut Electric motor Output table 2.The parameters 1.Model no. Ridge cap roll forming machine 2.Thickness:0.3-0.5mm 3.Coli material:ppgi 4.The bearing capacity of manual decoiler:5 Tons 5.Shaft material:45#steel 6.Out diameter :60mm 7.Numbers of forming steps:11 stations 8.Transmission:chain transmission 9.Forming speed:2-3m/min 10.Main motor power:3kw 11.Voltage:380v50hz three-phase 12.Dimension:6.2*1.1*1.55 13.Cutting:hydraulic cutting 14.Blade material:cr12 steel with quenched Treated 60-62°c 15.Control system:plc(delta) 16:length tolerance:â±2mm 17.Weight:4.8t 18.Spare parts 1 easy damaged parts: conk 2pcs, fuse-link 4pcs 2 rubber mat: 1 pcs 3 bolt spanner: 1 pcs
The tiles produced by this machine are widely used in all kinds of factories, warehouses and supermarkets, shops etc. It consists of feeding platform, main molding core, shearing mechanism, hydraulic station, computer control cabinet, high precision counter and so on A.Function and feature This producing line uses galvanized steel sheet, colored armor plate or aluminum plate as the material plate. The products produced by this machine are bright in colored, against fading, resistant to rust, and be widely Used in shops, working departments, warehouses, and fire partition. Its strength is three times higher than Aluminum alloy door. B.Equipment parts Feeding platform C.Hydraulic system Computer control system (imported computer) High-precision automatic counter Productivity: 10-18m/min, 3500 m2/8hs Suitable process material: colored steel sheet, aluminium steel sheet, and galvanized steel sheet 380v 50hz or at buyer's request D.Optional equipment: Manual uncoiler frame in different tons Hydraulic automatic uncoiler E.Working space and workman for the equipment Ground-level land 5t overhead travelling crane Space for storing the material Space for laying the machine Road for vehicle moving Workman: 2, operator and porter
