It is used to measure the rebound value of vulcanized rubber and elastomer. ( Hardness requirement: 30-85IRHD)
It is mainly used to test tensile force, pressure, displacement and stiffness of spring products.
It is used to measure the plastic deformation capacity and surface and internal defects during unidirectional or bidirectional torsion which the metal wires with diameters of 10 mm~30 mm.
Feature descriptionï¼? Vertical Crimping +80mm Opening Fast Crimping Up to 6" Hose
Feature descriptionï¼? Up to 480mm OD Crimping SIEMENS Precision Digital Control Low Crimping Height from Ground Die Set length up to 330mm
Max. sheet Size 1650x1210mm Min. sheet Size 650x550mm Max .Die-Cutting Size 1620x1190mm Max. Mechanical Speed 3600s/h Min. gripper waste 8and 9mm cutting rule height: 23.8mm electrical power: 20.5 kw die cutting precision: ± 0.5mm Total Power 380V.50HZ, 3-Phase Max .Die-Cutting Pressure 250t Gross Weight 21t pressure adjusting range: ± 1mm stock range corrugated board 1-8mm,cardboard 350g above Inner chase size 1646x1220mm dimension 6620x5330x2550mm
2-Manipulators Automatic LPDC Low Pressure Die Casting Machine The LPDC5540-S equipment consisting of main components: casting device, induction furnace, receiving car, graphite bath, die cleaning device,crane, two manipulators, hydraulic and drives system, pneumatic system, riser tube heating system and control system etc. Applications: The Low Pressure Die casting machine are mainly for brass alloy and zinc alloy metal products, especially on faucets, valve bodies and sanitary fittings and accessories. Advanages: 1. High quality casting and high-precision repeatability , automated casting with servo motor driving, linear guiding rail system; 2. High capacity ranges 400~450 castings per shift (8hrs); 3.Quick die change flange, 5 mins by munually ; 4. Furnace heating method: gas burner is standard and elctricity for option; 5. Max. die diemension 550*400mm; 6. Whole set machine cooled by cooling water for a efficiency cooling, highly improve inductors service life; 7. Zinc Oxide dust cleaning unit for furnace cleaning; 8. Industrial PC control with Ethernet cables, die casting programs up to 200 saved, recording & tracking furnace temperature; 9 .Cost-efficient production ( reduced melting loss,multiple die,one-man operation,increased yield); 10. Humanization of the work station (ergonomic design of the work station,minimizing of heat,noise and danger of accident) Technical Parameters: Code Item Model: LPDC5540-S External Size: L*W*H (mm)6000*6000*3400 Power Rate (KW):180 Operating Voltage (V):380 Qty. of Manipulator (sets)ï¼?2 Max. Die Mould Weight (KG)ï¼?180 Max. Die Mould Dimensions(mm)ï¼?550*400*250 Power of Electric Furnace(KW)ï¼?2*80 Furnace Melting Capacity (kg/hr)ï¼?520 Qty. of Furnace (set)ï¼?1 Qty. of Mould Cleaning Bin (set)ï¼?1 Qty. of Feeder (sets)ï¼?2 Qty. of Grahite Bath (set)ï¼?2 Qty. of Crane (set)ï¼?1 Max. Loading of Crane (KG)ï¼?500 Qty. of Tube (pieces)ï¼?3 Gas Pressure (KG)ï¼?6 Water Pressure(KG)ï¼?3 Max.Temp. of Furnace ()ï¼?1250 Temp.of Cooling Water()ï¼?20±2 Max. Speed of Manipulator35° / Sec. Max. Clamping Stroke of Mould (mm)370 Angle Range of Mould Soaking (°)ï¼?0~90 Pressure of Thimble (KG)ï¼?540 Stroke of Thimble (mm)ï¼?50 Pressure of Casting (Bar)ï¼?50~1200 Equipment Size: L*W*H LD5540-Dï¼?6500*6000*3400mm LD5540-Sï¼?7000*7000*3687mm Total Weightï¼?13T Total Powerï¼?125KW180KW Operating Voltageï¼?380V380V Please contact us for more specifications with your inquiry today! Our honor to sever you with our best service and highest quality. Whatsapp:+8613670190553 Wechat:+8613670190553 Email:dzivydeng@163.com
Material: PS Usage: For Vacuum Forming Feature: Moisture Proof Hardness: Rigid Processing Type: Multiple Extrusion Transparency: Opaque Place of Origin: Dongguan,China(Mainland) Brand Name: Sunyo Place Of Origin: Dongguan,China(Mainland) Color: Black Application: For Vacuum Forming Width: 300~1300mm(customized) Surface: Glossy/matt Design: 1.10g/cm3 Thickness: 0.3mm~2mm
The 4*4 material box is used for the rotation, storage and drying of the LED package chip holder. The whole is made of 6061 aluminum profile precision hollowing, which is stable and durable. The smooth and burr-free surface groove can better protect the chip holder from being scratched by the outside no problem of injury wii occurr.
Semiconductor IC packaging nailing machine is a + + cylinder by imported PLC control system of fiber optic sensing system, this nailing machine use brand vibration plate automatic feeding rubber nails, nail glue delivery guarantee nailing process smoothly. Intelligent design can realize plastic (IC) automatic feeding and automatic feeding two models, the automatic feeding hose model applies to more than one machine, a nailing fast, stable, save the characteristics of the artificial. The non-automatic feeding mode is suitable for one machine, which has the characteristics of small floor area, and the speed of the nail is determined by the speed of the worker.
The high temperature resistant slot magazine is made of imported materials and has a hard surface oxidation treatment. It can withstand temperatures above 300 degrees without deformation and discoloration, and is stable and durable.
1.Widely application,material could be wood veneer heat transfer film,PVC film etc,it is professional for making PVC wood door,cabinet and other wood furniture 2.Intelligent temperature controller,heating area adopt energy-gathered reflecting cover,save electricity 3.Heating tubes are specially customized for our factory,with 8000-10000 service life,could run 24 hours 4.Heating box is controlled by cylinder,tight closed,beautiful appearance,easy to open and close 5.Take less space,easy for installation and operation.
Portable Genset Handy Series EP 1000 Due to Honda's innovative technology, this new age generator is so silent that you might actually want to check if it's on. In fact, to make it a complete standby power source, every possible detail has been kept in mind while designing its features. 750 VA Petrol Run, Recoil Start
Diameter: 2 to 12mm Material: FPM.HT1.NBR.PU.SI Antistatic and non-marking options Plug-in threaded joint 1. PFG 2 8. PFG 15 14. PFG 50 2. PFG 3.5 9. PFG 20 15. PFG 60 3. PFG 5 10. PFG 25 16. PFG 80 4. PFG 6 11. PFG 30 17. PFG 95 5. PFG 8 12. PFG 35 18. PFG 120 7.PFG 10 13. PFG 40 Our Highlights... Different materials Wide range of diameters Optimum shape Low internal volume Supports on the bottom side Your Benefits... Suction cups for a wide range of applications (high temperatures, antistatic, low marking, resistance to chemicals) Wide range of versions for different sizes and types of workpieces High suction forces with small dimensions For very short cycle times No permanent deformation of thin-walled workpieces
Diameter: 125 to 300mm Material: NBR.SI Aluminum support plate Round suction cup for handling of smooth, flat workpieces Series SPU B with thicker sealing lip: handling of workpieces with a slightly rough surface, such as wood or scaly metal sheets Series SPU AE with integrated peeling insert: handling of thin metal sheets (approx. 1.0 - 2.5 mm); overcomes the self-adhesion between the sheets Our Highlights... Supports on the bottom Low internal volume Wide range of diameters Optimum shape Your Benefits... No permanent deformation of thin-walled workpieces Very short cycle times Wide range of versions for many different workpieces High suction force in spite of small dimensions 1. MPU 125 2. MPU 16 3. MPU 210 4. MPU 250 5. MPU 300
This electronic universal testing machine consist of host machine, mechanical limit switch, electrical system, test accessaries, etc . It is suitable for tensile, compression, bending and other mechanical property for metal and non-metal material, such as steel, aluminum,copper,geotextile,plastic,rubber,thread,wood,alloy,PVC,spring,electrical wire and cable, composite material, profiled bar, waterproof roll and all ASTM, ISO, JIS, DIN, BS, EN relative material mechanical testing standards. The machine is calibrated according to international norms requirement as ASTM E4, ASTM E83, ISO7500-1, ISO9513 and supply a full detailed calibration certificate. They are essential testing instruments for quality control section, university and college, research institution and mining enterprise quality lab.
1. This is a semi-automatic apple pitting machine produced by Cangzhou Wanqing machinery equipment co., ltd.Its wear-resisting performance is strong, long - time work is not easy to damage parts. 2. This semi-automatic apple coring machine, the operation is particularly simple, only need the workers to place the apple on the long conveyor belt above the fruit hole to complete the coring work.A food-grade silica gel peel bowl was added to these fruit holes without damaging the fruit. 3. This apple coring machine to clean core, and core after the small aperture, excellent effect. 4. The company always adheres to the concept of reputation first and quality first.Welcome new and old customers to come to negotiate.
This is a small semi-automatic date pitting equipment.Compared with those large pitting machine, this small semi-automatic red date pitting machine operation is relatively simple and convenient.While the turntable is turning, workers only need to put the dates into the turntable hole to complete the process of coring.Before removing the core of the device, the red date is pressed into the bottom of the hole of the date carrier by the plastic column, so as to better fix the center of the date fruit.Greatly improved the efficiency of kernel removal.In addition, after the pit of the fruit and jujube categories out, really achieve the classification clear, unadulterated characteristics.This small jujube pitting machine is produced by Cangzhou Wanqing machinery equipment co., ltd., the chassis is made of stainless steel, the safety performance is very high.And the equipment is manufacturers direct sales, reasonable price, perfect after - sales.
Automatic stretch blow molding machine APF - 30 to produce PET bottles. Output - 250 bph. Bottle volume - 10.0 - 30.0 L
Automatic stretch blow molding machine APF - 3002 to produce PET bottles. Output - 3000 bph. Bottle volume - 0.2 - 2.0 L
