1.The series of stirrers are used SB90-278 SB90-279 standard equivalently used to mill no even system liquid whose viscosity is 15000 centipoises,and density is 2000kg/m3 to solve fiber matter of crystal or no crystal and keep solid granule be equal floating state. 2.Rot content of stirrer:carbon steel is2mm and stainless steel is 0. At low velocity,it is horizontal circumferential flow and axial flow.And at high velocity,it is radial flow and axial flow.There is a strong eddy current at the front end of the blade.It can be operated in laminar and turbulent zone.
Impeller is the key component of mechanical mixing equipment.In the mechanical engineering design of mixing equipment, the selection of the impeller type is very important.When selecting the type of the impeller,it is necessaryto make a comprehensive evaluation of the process,equipment,mixing requirements,economy,etc.and find out the main control factors of the operation,combine the performance characteristics and flow state of impeller,select the appropriate impeller. Flow state:The horizontal circumferential flow is dominant at low speed,the radial flow at high speed,and the up and down circulation with baffle. Applicable viscosity:General
The bubble removing oar is equipped above the liquid surface,and used for the removing bubbles produced from the liquid surface,and has been widely used in the fermenting cans,the effects are nice. Flow state:Horizontal circumferential flow of different heights,such as opposite pitched subsidiary blade impeller or angle blades,can increase the eddy current near the blade.Laminar flow state operation. Applicable viscosity:
Equipment technical parameters: model HL-B30 control system PLC human machine interface Cutting method Motor cut-off Journey 30mm source 220V 50-60HZ power 300W Cutting diameter 5- 30mm 30- 45 Length error Cutting length ± 1% Shear speed 10-60 pieces/minute (depending on Appearance 580X470X500mm (70KG)
Product Details: 1.Use power: AC220V / 50 hz 2.Winding length range: can adjust according to the requirement 3.Wire wound frequency range: 1 ~ (can be preset) 4.Machine Size: 400 mm X 280 mm X 400 mm; wire coil size:80mm-200mm 5.Winding speed: adjustable/positive and negative turn adjustable 6.Use environment temperature: + 5 ~ + 40 �°C, relative humidity (20 ~ 90) % RH 7. No violent shaking, shock, vibration, no electromagnetic interference, no dust, explosive, corrosive gas, heat dissipation good place.
LG-900 Hydraulic Rail Tensor This machine can not only be used for repairing the broken rails of the seamless track, but also can be used for the stress relief of the seamless track and the adjustment of the track seam in sections of the ordinary track, and is suitable for various rail types. The use of this product can change the traditional method of repairing broken rails, that is, adopting rewelding without inserting short rails, which saves time and effort, expands the operating rail temperature range, and prevents the actual lock rail temperature from changing. Specification Model LG-900 Type Hydraulic Rail Tensor Material Aluminium Dimensions (L x W x H) 1450*780*650 mm Working Pressure 67 MPa Max. tensile force 900 kN Max. compressive force 200 kN Cylinder stroke 500 mm Power supply Petrol engine or electric motor Locking form Wedge iron lock Weight 380 kg
Place of Origin Hubei, China Type Rail switch grinding machine Material Stainless Steel Dimensions (L x W x H) (mm) 2100*1120*1030mm Brand Name Linkage Product name Rail switch grinding machine for track maintenance function Rail switch point grinding Engine Honda GX270 Petrol engine Grinding wheel speed: â?¥3600r/min Feed adjustment accuracy: â?¤l0mm Weight â?¤117kg Rated power: 5.1kW Grinding wheel feeding stroke: â?¥80mm Grinding wheel rotation angle: â?¥30�° NCM-5.1 frog and switch grinding machine is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30�° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head.
Place of Origin Hubei, China Type Electric Rail Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1200*420*900mm Brand Name Linkage Engine 2.2kW, 380V or 220V electric motor Grinding stone speed 2860 r/min Grinding stone specification 150*55*70mm Grinding stone feeding stroke 50mm Turning angle of grinding stone 90�° Weight 80kg Electric Rail Grinding Machine The design of FMG-2.2 electric rail profile grinder allows you accurate and stable profile grinding up to 90�°about the rail head by rotation of the machine using its turming device and its inclinable operating arm. According to customer needs, 380V three-phase motor can be selected as power or 220V single-phase power as power. With good visibility of the grinding area assures you of a high quality finish.
Place of Origin Hubei, China Type rail profile grinding machine Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Brand Name Linkage Product name rail profile grinding machine Profile wheel span: 1000mm Engine 2 stroke petrol engine M165 Grinding stone speed: â?¥3900r/min Grinding stone feeding stroke: 42mm Fuel tank volume: 4.5L Feed adjustment accuracy: 0.125mm Power: 6.0kW Grinding stone inclination: 0~90�° Grinding stone specification: 150*55*70mm NGM-6.0 Internal Combustion Rail Profile Grinding Machine This Rail Profile Grinding Machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding.
Rail wave grinding machine The GBM-7.6 rail wave abrasion grinding machine is a professional machine used for the wave abrasion and grinding of the rail top. This machine is suitable for various rails of 43~75kg/m. Model GBM-7.6 Engine Honda GXV390, 7.6kW, single cylinder, air-cooled 4-stroke petrol engine Power supply 7.6kw Spindle revolution â?¥3600r/min Profile wheel span â?¥1000mm Grinding stone feeding stroke â?¥45mm Grinding stone feeding accuracy â?¤0.11mm Weight 85KG
Place of Origin Hubei, China Type Other Material alumunium Dimensions (L x W x H) (mm) 1200*400*550mm Brand Name Linkage Product name rail profile grinding machine Usage rail profile grinding machine Application rail profile grinding machine Standard crcc Quality Control iso Certificate CE Warranty 1YEAR Customize yes NGM-6.0 Internal combustion rail grinding machine, Itâ??s suitable for grinding rail welding seam, uneven joint, rail side fat edge, rail surface repair welding of rail 43kg/m-75kg/m. Its grinding quality is good and itâ??s easy and simple to handle, and convenient to be up on and down from the rail. Itâ??s an indispensable tool for railway engineering heavy repair, maintenance and first aid repair. NGM-6.0 Engine 2 stroke petrol engine M165 Power supply 6.0kw Spindle revolution â?¥3900r/min Grinding stone inclination 0~90�° Grinding stone feeding stroke 80mm Grinding stone feeding accuracy 1mm Grinding stone specification �?150x�?55x70mm Weight 60kg
Place of Origin Hubei, China Type Other Material alumunium Dimensions (L x W x H) (mm) 1900*1200*2500mm Brand Name Linkage Product name automatic rail tamping machine Usage automatic rail tamping machine Application automatic Hydraulic rail tamping machine Standard crcc Quality Control iso Certificate CE Warranty 1YEAR Customize yes Other name track ballast tamping machine YD-22III Smart rail tamping machine unit is a renewal product developed by our factory with new material and new technology. It has collected the tamping experience of users at home and abroad. It can do tamping works not only on the ballasted track of concrete sleeper type II and III in China, but also on various kinds of concrete sleepers and steel sleepers in foreign countries.This machine is suitable for tamping operation of different types of rails and concrete sleeper line after large and medium repair and sieving operations, and also suitable for tamping operation of ballast on newly built track bed. The equipment has superior performance, reasonable structure, safety and reliability, and high working efficiency. It fully meets the needs of railway ballast tamping operation
Place of Origin Hubei, China Type Other Material alumunium Dimensions (L x W x H) (mm) 1500*400*250mm Brand Name Linkage Product name Hydraulic rail tamping machine Usage Hydraulic rail tamping machine Application Hydraulic rail tamping machine Standard crcc Quality Control iso Certificate CE Warranty 1YEAR Customize yes Other name track ballast tamping machine function railway ballast tamping work YD-22 hydraulic Tamping Machine is a kind of professional machinery used for railway line ballast tamping maintenance except for turnouts. It can be operated with train inervail time, without closing sections. It is equipped with three power modes. They are petrol, diesel and electric. BENIFITS â?? Engine types: Honda GX390 petrol engine or SF 190 diesel engine or electic engine. â?? It is sitbl for the tamping operation in the new constuction of ordinary railway lines and the large-scaie or medium-scale railway line maintenance â?? It can complete the tamping operation of various types of concret seepers and wooden sleepers â?? Equipped with automatic rail clamping device â?? Equppped wih the f-tac walkin frame, the machine can be removed off at any place and any time
NQGâ??5.1 Rail Cutting Machine To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc. Place of Origin Hubei, China Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 800*560*500mm Brand Name Linkage Engine GX270 petrol engine 5.1KW Specification of cutting disc 400*32 *4mm Cutting disc no. of revolutions 3320 r/min Linear speed of cutting disc 70m/s Cutting accuracy Verticalityâ?¤0. 4mm, flatnessâ?¤0.3mm Cutting time 2 min ( cut off 60kg/m rail) Weight 50kg
Features: 1.super mute crimping machine, low noise 2.high quality cable making machine, for all kinds of terminals 3.quick replacement of applicators, English interface 4.easy operation and maintenance Technical Specs: Model HL-4000A(N) Pressure capacity 4Ton Stroke 30mm Height Adjustment Voloume 10mm Power supply AC220V�  50/60HZ Power 1.25kw Operating model single pedal switch Dimension 310*270*710mm Weight 75KG
Product Description Full Automatic crimping machine� , Including dismantling the out jacket, insulation wire, crimping ,the� plug� inserts, used � for flat cable H03VVH2-F and H05VVH2-F only.with CE mark. Three functions of wire stripping, automatic feed and pressure connection in one, completed once for all.3-4 labors are saved compared with original operating mode, reducing labor and improving� output. Model� of� machine HL-CX04 Pressure� connection� speed 2000-2300 PCS/Hour Punching� Force 3T Voltage AC220V/50HZ Pressure� of� air� source 0.5-0.8Mpa Weight 375KG Dimension 1150mm*700mm*1480mm
Equipment technical parameters: model HL-B30 control system PLC human machine interface Cutting method Motor cut-off Journey 30mm source 220V 50-60HZ power 300W Cutting diameter 5- 30mm 30- 45 Length error Cutting length ± 1% Shear speed 10-60 pieces/minute (depending on Appearance 580X470X500mm (70KG)
Product Details: 1.Use power: AC220V / 50 hz 2.Winding length range: can adjust according to the requirement 3.Wire wound frequency range: 1 ~ (can be preset) 4.Machine Size: 400 mm X 280 mm X 400 mm; wire coil size:80mm-200mm 5.Winding speed: adjustable/positive and negative turn adjustable 6.Use environment temperature: + 5 ~ + 40 �°C, relative humidity (20 ~ 90) % RH 7. No violent shaking, shock, vibration, no electromagnetic interference, no dust, explosive, corrosive gas, heat dissipation good place.
Specifications: Features: 1.super mute crimping machine, low noise 2.high quality cable making machine, for all kinds of terminals 3.quick replacement of applicators, English interface 4.easy operation and maintenance  Technical Specs: Model HL-3000 Pressure capacity 3Ton Stroke 30mm Height Adjustment Voloume 10mm Power supply AC110C/220V� � � 50/60HZ Power 0.75kw 1.25kw Operating model single pedal switch Dimension 260*300*650mm Weight  45kg 0KG
Product Details: The Coax Strip HL-8517 is a semi-automatic, programmable multi-step stripping machine for coaxial, triaxial, multi-conductor cable and single conductor wire. This benchtop unit can easily process coaxial and triaxial cables up to17 mm outer diameter and strips lengths up to 85 mm . High precision rotary stripping up to 9 steps Fast processing speed Menu guided programming with user-friendly graphical display Max. Diameter mm17mm Diameter Increments 0.1 mm Max. Stripping Length 85 mm Stripping Length Increments 0.1 mm Cable Clamping Motor driven with programmable clamping force Stripping Steps 9 (depending upon cable type and programming) Dimensions (L xW x H) 620x 335 x 218 mm Weight 28kg
