(1) Performance - The mechanic recovery blasting room adopts mechanic recovery system to recovery abrasives and the abrasives can be chosen according to requirements. The abrasive usage is high and process productivity is also high. - The dust removing system adopts two stages dust removing, and the dust removing efficiency can reaches 99.99%. - The air flow in ventilation in this kind of blasting room can be adjustable to prevent the abrasives from entering cartridge filters. Thus it can reduce the lost of abrasives and can have a good dust removing efficiency. - The main electrical elements in this blasting room uses Japan/EU/USA brand. They have the advantages of reliability, safety, long life service and easy maintenances. - Use widely: It applies to middle and small size of blasting room to do pretreatment jobs such as rough, casting, welding, heating, steel structure, container, transformer shell, special parts and so on.
1. Type of Production Line Production capacity: 6 million sqm/year (Calculate by 24hrs/day and 300 working days per year) Power: 380V/50Hz; 3 phase Size of boards (L*W):1220mm*1830mm; Size of Finished product (L*W): 600mm*600mm Thickness:6-12 mm Films on front side of board: PVC films Films on back side of board: Aluminum films 3. Description of Machines 3.1Double-Side laminating Machine It includes gluing device,rolling device and flattening device. It can work with two side (front side PVC film, back side aluminum film) at same time, no need to turn it over. It is widely used for coating the surface of density board, multilayer plywood, joinery board, glass, acrylic, mosaic,all kinds of flat plate. 3.2 Dividing and Cutting Machine It includes vertical saw, horizontal saw, conveyor roller way, board-pushing device and so on. It also includes dust collecting system. Easy to operate, can divide and cut board into small pieces simply. With dust collector then make the working environment much cleaner. 3.3 Edge-Sealing Machine PLC and HMI control system, it can produce quickly and stably, with high efficiency; It is the professional edge sealing equipment which makes ceiling tiles. 3.4 Thermoplastic Packing Machine It includes two parts: edge sealing&cutting machine and shrinking machine, the product will be covered films and cut automatically, then go through shrinking machine and finish packing.
1. Type of Production Line Production capacity: 6 million sqm/year (Calculate by 24hrs/day and 300 working days per year) Power: 380V/50Hz; 3 phase Size of boards (L*W):1220mm*1830mm; Size of Finished product (L*W): 600mm*600mm Thickness:6-12 mm Films on front side of board: PVC films Films on back side of board: Aluminum films 3. Description of Machines 3.1Double-Side laminating Machine It includes gluing device,rolling device and flattening device. It can work with two side (front side PVC film, back side aluminum film) at same time, no need to turn it over. It is widely used for coating the surface of density board, multilayer plywood, joinery board, glass, acrylic, mosaic,all kinds of flat plate. 3.2 Dividing and Cutting Machine It includes vertical saw, horizontal saw, conveyor roller way, board-pushing device and so on. It also includes dust collecting system. Easy to operate, can divide and cut board into small pieces simply. With dust collector then make the working environment much cleaner. 3.3 Edge-Sealing Machine PLC and HMI control system, it can produce quickly and stably, with high efficiency; It is the professional edge sealing equipment which makes ceiling tiles. 3.4 Thermoplastic Packing Machine It includes two parts: edge sealing&cutting machine and shrinking machine, the product will be covered films and cut automatically, then go through shrinking machine and finish packing.
1. Annual output: 5million to 30 million sqm(based on thickness of 9.5mm gypsum board) 2. Working time: 24hours/day and 300 working days/year 3. Raw material: Gypsum powder, shielding paper, modified starch, foaming agent, glue 4. Fuel: Natural gas, diesel, heavy oil or coal 5. Product quality and specification: 1) The product is in compliance with National Standard GB/T9775-2008 2) Product specification: Length: 2400mm~3600mm Width: 1200mm or 1220mm Thickness: 8mm-20mm 6. Main process: 1)Raw material blending; 2)Shaping; 3)Wet board/panel conveying; 4)Drying; 5)Dry board/panel conveying; 6)Finished product stacking and storage. 7. Main technology: The production line adopts special designed hot air stove heating system 8.Raw material consumption list: (Based on 9.5 mm gypsum board for reference)
1. Annual output: 5million to 30 million sqm(based on thickness of 9.5mm gypsum board) 2. Working time: 24hours/day and 300 working days/year 3. Raw material: Gypsum powder, shielding paper, modified starch, foaming agent, glue 4. Fuel: Natural gas, diesel, heavy oil or coal 5. Product quality and specification: 1) The product is in compliance with National Standard GB/T9775-2008 2) Product specification: Length: 2400mm~3600mm Width: 1200mm or 1220mm Thickness: 8mm-20mm 6. Main process: 1)Raw material blending; 2)Shaping; 3)Wet board/panel conveying; 4)Drying; 5)Dry board/panel conveying; 6)Finished product stacking and storage. 7. Main technology: The production line adopts special designed hot air stove heating system 8.Raw material consumption list: (Based on 9.5 mm gypsum board for reference)
1. Annual output: 5million to 30 million sqm(based on thickness of 9.5mm gypsum board) 2. Working time: 24hours/day and 300 working days/year 3. Raw material: Gypsum powder, shielding paper, modified starch, foaming agent, glue 4. Fuel: Natural gas, diesel, heavy oil or coal 5. Product quality and specification: 1) The product is in compliance with National Standard GB/T9775-2008 2) Product specification: Length: 2400mm~3600mm Width: 1200mm or 1220mm Thickness: 8mm-20mm 6. Main process: 1)Raw material blending; 2)Shaping; 3)Wet board/panel conveying; 4)Drying; 5)Dry board/panel conveying; 6)Finished product stacking and storage. 7. Main technology: The production line adopts special designed hot air stove heating system 8.Raw material consumption list: (Based on 9.5 mm gypsum board for reference) Till now, we've manufactured and supplied complete sets of machine lines to Russia, Oman, Uzbekistan,United Arab Emirates, Iran. Payment conditions: 30% (USD) prepaid by T/T as down payment; 70% by irrevocable L/C at sight a).65% shall be paid against shipping documents at sight. b).5% shall be paid against performance guarantee at sight. What's more , Kunlun bank account available to make convenient for Iranian clients
1. Annual output: 5million to 30 million sqm(based on thickness of 9.5mm gypsum board) 2. Working time: 24hours/day and 300 working days/year 3. Raw material: Gypsum powder, shielding paper, modified starch, foaming agent, glue 4. Fuel: Natural gas, diesel, heavy oil or coal 5. Product quality and specification: 1) The product is in compliance with National Standard GB/T9775-2008 2) Product specification: Length: 2400mm~3600mm Width: 1200mm or 1220mm Thickness: 8mm-20mm 6. Main process: 1)Raw material blending; 2)Shaping; 3)Wet board/panel conveying; 4)Drying; 5)Dry board/panel conveying; 6)Finished product stacking and storage. 7. Main technology: The production line adopts special designed hot air stove heating system 8.Raw material consumption list: (Based on 9.5 mm gypsum board for reference)
Biomass briquetting machine is also called briquettes or straw briquetting machine. The briquetting equipment is suitable for the fluffy material such as straw and sawdust that can be produced a high density of biomass briquette. Straw briquetting needs the ensilage machine or rubbing machine to crushing to the length of 20 ~ 50 mm material. Through extreme pressure, the briquette is formed. The density of briquette is 0.7 ~ 1.2 g/cm3. The benefit of briquette is convenient to transportation, save and usage. Straw briquette overcomes the lightweight, large volume, and easily affected by environmental conditions such as rain or snow fire. It can be satisfied with the demand of the commercialization, which can be sold as fuel or animal feed. Biomass briquettes production line included feeding conveyor, briquettes, and discharging machine, and the operation of distribution cabinets. While, the briquetting machine included equipment rack, motor, feeding port, transmission system, pressure roller, horizontal ring die, discharging port and other parts. The straw, grass, and wood chips put into cutting or grinding machine to be fiber. The fiber length less than 50mm. The moisture content is between 12% and 25%. The feeding conveyor sends material into the feed port. Through the spindle rotation to drive the roller rotation, and then through the rotation of the roller, the material was extruded by nubby shape from the horizontal hole. and falling the discharging port. The model hole can be a square or circular ring.
Production Line Application and Feature: This series machine is composite o�vibrating sieve, high speed mixer, cooling machine, plastic feeder, conical twin screw extruder(or single screw extruder), machine head, forming machine(for double wall corrugation pipe or single wall corrugation pipe), plastic pipe belling machine, stacker, water-cooling machine, air compressor etc which is mainly used to produce PVC, PE plastic double-wall and single-wall corrugation pipe.
This pipe production line is a new kind of drainage, pipe production line developed by our company, is mainly used for producing the HDPE/PP winding drainage pipe from ID 300-3500mm. The kind of pipe is made from PE/PP with thermoforming technology, it is of high ring stiffness,low weight, easy jointing and no leak,, and it is mainly used for municipal drainage, agricultural drainage and agricultural irrigation. It is of electrical fusion welding socket and spigot, this is the most of reliable joint.The line is designed with the latest technology, high production efficiency ,and easy operation.The line can continuously produce the winding pipe, its efficiency is very high, not need to change the mould. It can produce the pipe with different ring stiffness and wall structure from 300mm to 3500mm within short time by , and there is no material waste during the changing elements. In addition, this production line can produce large diameter compositing reinforced pipe for high pressure water transportation after it can be updated.
Automatic CPP BOPP PE PP PVC plastic Film perforation machine Hot needle micro perforation machines are specifically designed to perforate poly-based materials at speeds up to 100m/min with the following benefits; Latest hole technology Integrated speed control between the pin and web Infra-red heating system with instant heat Quick pattern change Accurate pin penetration control Precise temperature control Energy efficient drive technology Touch screen control system High efficiency insulation The machine was consist of unwinding part, perforation part, and rewinding part, which to perforate plastic film easily. The hot needle perforation machine places pores into packing film for food and plant industry, and can be integrated into every continuous web path. And there's an intelligent control system matches the speed of the perforating needles to the speed of web.
Automatic CPP BOPP PE PP PVC plastic Film perforation machine Hot needle micro perforation machines are specifically designed to perforate poly-based materials at speeds up to 100m/min with the following benefits; Latest hole technology Integrated speed control between the pin and web Infra-red heating system with instant heat Quick pattern change â?¢ Accurate pin penetration control Precise temperature control â?¢ Energy efficient drive technology Touch screen control system â?¢ High efficiency insulation The machine was consist of unwinding part, perforation part, and rewinding part, which to perforate plastic film easily. The hot needle perforation machine places pores into packing film for food and plant industry, and can be integrated into every continuous web path. And there's an intelligent control system matches the speed of the perforating needles to the speed of web.
Best quality ZS45/100 conic twin screw extruder price for smallPVC/WPC profile This machine has the feature of low waster of energy, good performance, high speed and high efficiency, atc. The finished products produced by this machine has he feature of good surface, stronger compression resistance, light and heat stability, low size-changing and ageing resistance. Parts Main items Model Explanation Screw and barrel Screw diameter Φ50mm Zhoushan, Zhejiang Material 38CrMoALA, deeply nitrading processing Screw valid length 1400 mm Screw number 1 Barrel heating power 9KW Barrel wind-cooling power 180W �3 Nitriding depth 0.40-0.70mm Nitriding rigi dity (HV) 890-980 surface roughness (mm) Ra0.8-Ra1.6 Linearity �0.015 Output 40-60kg/h Heating type and material Electric Heating by Aluminum ring Raw material ABS granules Reduction driver Reduction gear Hard teeth Jiangyin, China Driver motor Power 15 KW Plastic machine special used Main machine Feeding type Automatic dryer & loader Center height 1000mm (match with mould) Contact type of Die and mould Contact by bolts in the type of flange Total power 20 KW Electrical parts Items Brand Number PLC SIEMENS 1 Frequency converter ABB 1 Contactor SIEMENS 9 Current meter CHINT 7 Volt meter CHINT 1 Overload circuit breaker SIEMENS 1
Production Line Application and Feature: This series machine is composite o vibrating sieve, high speed mixer, cooling machine, plastic feeder, conical twin screw extruder(or single screw extruder), machine head, forming machine(for double wall corrugation pipe or single wall corrugation pipe), plastic pipe belling machine, stacker, water-cooling machine, air compressor etc which is mainly used to produce PVC, PE plastic double-wall and single-wall corrugation pipe.
Production Line Application and Feature: This series machine is composite o vibrating sieve, high speed mixer, cooling machine, plastic feeder, conical twin screw extruder(or single screw extruder), machine head, forming machine(for double wall corrugation pipe or single wall corrugation pipe), plastic pipe belling machine, stacker, water-cooling machine, air compressor etc which is mainly used to produce PVC, PE plastic double-wall and single-wall corrugation pipe.
Production Line Application and Feature: This series machine is composite o vibrating sieve, high speed mixer, cooling machine, plastic feeder, conical twin screw extruder(or single screw extruder), machine head, forming machine(for double wall corrugation pipe or single wall corrugation pipe), plastic pipe belling machine, stacker, water-cooling machine, air compressor etc which is mainly used to produce PVC, PE plastic double-wall and single-wall corrugation pipe.
Production Line Application and Feature: This series machine is composite o vibrating sieve, high speed mixer, cooling machine, plastic feeder, conical twin screw extruder(or single screw extruder), machine head, forming machine(for double wall corrugation pipe or single wall corrugation pipe), plastic pipe belling machine, stacker, water-cooling machine, air compressor etc which is mainly used to produce PVC, PE plastic double-wall and single-wall corrugation pipe.
Sawdust dryer is used for pellet sawdust or powder sawdust. Wet materials are continuously sent into the drum through a screw conveyor and then get separated and pushed by the high-speed hot flow. The moisture in wet materials is taken away in this process and then we get powder or pellet dry materials. Sawdust dryer is widely used for the drying of straw briquette, charcoal, wood pellet fuel, sawdust briquette, corn straw, soybean straw, cotton stalk, wheat straw, sorghum stalk, wood shavings, sawdust, gingko leaf, mulberry leaves, and other fiber materials. Sawdust dryers are consist of heating furnace, feeding port, drum, filter drum, conveying pipe, cooling drum and discharging port.
Biomass ring-die pellet mill is a nationally pioneering product designed by the technical team from Dingli. The design of the molds is unique. The press rollers are made of wear-resistant alloy material, The working life of wearing parts is several times of similar products. Transmission structure can realize the automatic filtering process of grease. This product with unique design, proper structure, low energy cost, and strong wear resistance, which fills the domestic technical blank of vertical ring-die pellet feeding equipment. This palletization equipment is applicable to materials that are difficult to mold and bond, such as rice husk, sunflower seed husk, and peanut shell, branch, trunk, wood rind, crop straw, rubber, cement, ash, and other chemical materials. The pelletized product can be used in the biomass fuel plant, power plants, timber processing plants, fertilizer plant, and chemical plants. This product is a satisfying compression molding equipment with low capital cost, quick profits, and free risk.
Cast films produced on chill roll lines have become an indispensable product in the packaging industry. They provide versatile and high-quality options for safe and economic packaging of products. To manufacture multi-ply packaging materials of 15 to 150 microns thickness, such as Stretch films, Cling films, Barrier films, Masking films, CPP films, and Blister films. Technical Specifications : MODEL SCREW DIA (mm) L/D Ratio Die Size Finish Film Width Output (Kgs/Hr.) JP-COEX-CF 1350 (Three Layer) 70 | 90 | 70 30 : 1 1350 mm 1050 mm 250 to 300 JP-COEX-CF 1800 (Three Layer) 70 | 100 | 70 30 : 1 1800 mm 1500 mm 285 to 400 JP-COEX-CF 2300 (Three Layer) 70 | 100 | 70 30 : 1 2300 mm 2000 mm 380 to 500 JP-COEX-CF 2300 (Three Layer) 80 | 120 | 70 30 : 1 2300 mm 2000 mm 600 to 650 JP-COEX-CF 3300 (Three Layer) 80 | 120 | 80 30 : 1 3300 mm 3000 mm 570 to 745 JP-COEX-CF 2300 (Five Layer) 80 | 120 | 100 | 80 30 : 1 2300 mm 2000 mm 950 to 1000
