Gantry Milling Machine Gantry milling machine, referred to as gantry milling, is a milling machine with portal frame and horizontal long bed. The gantry milling machine can use multiple milling cutters to process the surface at the same time, with high machining accuracy and production efficiency. It is suitable for processing the plane and inclined plane of large workpieces in batch and mass production. CNC gantry milling machine can also process spatial curved surface and some special parts. It is divided into ordinary type and NC type. Some manufacturers have developed digital intelligent Dragon Gate milling with one key conversion between ordinary milling and NC milling, which is more flexible and practical.
Engraving Machine Concrete pavement engraving machine It is used for cutting anti-skid lines (also scattered water lines) on the road. The engraving depth is consistent, the texture is arranged orderly, and the surface is clear and beautiful. It is a machine for cutting anti-skid lines on the roade
Punching and Shearing Machine Smaller body, powerful functions, concise and perfect appearance, it is not inferior to an ideal punching and shearing equipment; the biggest advantage of the multifunctional punching and shearing machine is simple operation, flexible movement, high punching and shearing efficiency, and smooth and non-marking cross-section. , The failure rate is extremely low, and the service life is long.
Product Code Product Description PRS-CM6331 250 kN Automatic Cement Compression Testing Machine 220-240 V 50-60 Hz PRS-CM6331 /110 250 kN Automatic Cement Compression Testing Machine 110 V 60 Hz PRS-CM6431 15/250 kN Automatic Cement Flexure/Compression Testing Machine 220-240 V 50-60 Hz PRS-CM6431 /110 15/250 kN Automatic Cement Flexure/Compression Testing Machine 110 V 60 Hz PRS-CM0116 Upper Loading Platen with Ball Seating Assembly 165 mm and Lower Loading Platen, 165 mm PRS-CM0120/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms,ASTM PRS-CM0120/E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN PRS-CM0121/A Compression Jig Assembly to test 50 mm (2â??) mortar cubes, ASTM PRS-CM0121/E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN PRS-CM0122 Compression Jig Assembly BS, to test 70,7 mm mortar cubes STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349; BS 3892-1, 4551-1 The PARSROS Automatic range of single testing chamber and double testing chamber compression and flexure testing machines have been designed for reliable and consistent testing of mortar samples. These compression and flexure testers are the results of continuous applications and research studies to upgrade the machines with the latest technologies and conform the current standards EN 196-1, 459-2, 1015-11, 13454- 2; ASTM C 109, C348, C349 and BS 3892-1, 4551-1 in terms of its technical properties taking into account client requirements by using suitable accessories. These machines also meet the requirements of CE norms for safety and health of the operator. Compression and flexture jigs, distance pieces, and also removable transparent front-rear safety doors (should be factory installed) should be ordered separately. The PARSROS automatic cement compression and flexure testing machines allow less experienced operators to perform the tests. Once the machine has been switched on and the specimen is positioned and centered by the help of centering apparatus. The only required operations are; Setting test parameters, including pace rate (only required when the specimen type is changed.) Choosing the compression or flexure frame by using the changeover valve. Pressing the START button on the control unit. The machine automatically starts the rapid approach; switches the test speed after 1% of the load capacity of the machine and stops once the specimen failure. Automatically saves the test parameters and test results. The PARSROS automatic cement compression and flexure testing machines consist of very rigid two column single or double chamber frames, an automatic hydraulic power pack with data acquisition and control system
Ribbon Blender Machine Manufacturers - Ideal for Granules Filling & Powder Filling Machine .Available in India, Dubai, Brazil, Bangladesh, Israel, Kenya, New Zealand, Oman.
Cup Filler Machine Manufacturers - used as Snack Packaging Machine were snacks items pack by volume. Types: Single & Double Head Cup Fillers in India,Bangladesh, Brazil, Dubai, Egypt.
Servo Auger Filler Machine Manufacture for Pouch Packing, Spices & Seasonings Filling Machine. Available in India, Bangladesh, Brazil, Dubai, Egypt, Ethiopia, Ghana, Indonesia.
Auger Fillers Machine is specifically use for filling containers and pouches of liquid, Powders, Granules, Flours, Pastes. We manufacture the finest quality Auger Filler Machine for clients and we also accept customized design of machine or we design machine for you as per your requirements.
We produce professional machinery for making no-nail foldable plywood box. Now we have steel strip machine, buckles machine, double holes steel strip machine and automatic production line. For more details, please feel free to contact me.
Automatic Auger Filling Machine Manufacturers - Automatic / Semi Automatic Auger filling machine for Powder Filling & Powder Packing. Automatic filling line is designed and developed for filling powders into Rigid containers/Tins fed automatically through the conveyor and turn table. Automatic container filling line is suitable for pharmaceutical, Chemical and Food industries where high speed filling is required. These machines can be provided with multiple head filling as well in line with client requirements.
Heavy duty oil free piston pump, silent and stable operating performance. - Roller design, 360 Degree rotation. Silicon tube, resistant to high temperature and durable. - Step-less high voltage. High negative pressure, low flow, in order to protect the patient's laryngeal mucous. The circular negative pressure vacuum meter will display the negative pressure value visually. The patient can adjust the negative pressure value on a sputum-absorption required basis depending on their condition. - Anti overflow technology and large pumping rate. - Silent and stable operating performance. - 2.5L x 2 glass bottles, washable and sterilization available. - Stationary design with universal casters. - Suitable for clinics and operating rooms. - Equipped with convenient to operate pedal switches. - Input Voltage - 220 Volts AC +/- 22 Volts - Input Frequency - 50Hz +/- 1 Hz. - Average power consumption - 120 Volt Amps (Watts) - Maximum negative pressure value - >/= 0.09 MPa - Pumping rate - 20L/minute - Continuous operating time - >/= 30 minutes - Rest time - 30 minutes Jug volume - 2500ml glass bottle x 2. - Sound level -
Minimum order - 1 unit Description - Heavy Duty oil free piston pump - Anti over flow technology and large pump rate - Silent and stable operating performance - 2.5L x 2 glass bottles, washable and sterilization available - Stationary design with universal caster wheels. - Suitable for Health Clinics and Operating Rooms. - Storage space at the bottom of the machine. - Convenient storage for the pedal switches, power cord etc. - Uses an oil free piston pump to avoid oil and smoke pollution. Voltage - 220 Volts AC +/- 22 Volts Frequency - 50Hz +/- 1 Hz. - Average power consumption - 120 Volt Amps (Watts) - Maximum negative pressure value - >/= 0.09 MPa - Pumping rate - 30L/minute - Continuous operation >/= 30 minutes - Rest time
Brief Introduction of the 10L Rotary evaporator: 10L Rotary evaporator is mainly used in the concentration, crystallization, drying, separation and solvent recovery of pharmaceutical, chemical and biological pharmaceutical industries. Its principle is: under vacuum condition, constant temperature heating makes the rotary bottle rotate at constant speed, and the material forms large area film on the bottle wall, so it can be evaporated efficiently. The solvent evaporation is cooled by the high-efficiency glass condenser and recovered in the collecting bottle, so as to greatly improve the evaporation efficiency. The utility model is especially suitable for concentrating and purifying biological articles with high temperature and easy decomposition and degeneration. Main Features of the 10L Rotary evaporator 1, The main body of the use of stainless steel + aluminum alloy, reasonable structure, materials stress. 2, Sealing system using PTFE and imported fluorine rubber combination seal, to maintain high vacuum. 3, Vacuum pressure gauge shows real-time vacuum, vacuum up to 0.098Mpa. 4, Glass parts are all high borosilicate glass (GG-17), high temperature, anti-corrosion. 5, Can be continuously fed to facilitate the use of customers, valve-type feeding tube sets of tetrafluoroethylene tube. 6, Vertical three-tier serpentine coil condenser, the main cold + pay cold double condenser, to ensure high recovery rate, additional tube. 7, Microcomputer ON-OFF power switch control. 8, Bath digital display, intelligent thermostat control, K-type sensor fast and accurate delivery temperature. 9, Frequency control (0-120rpm), speed digital display, knob set, easy to operate. 10, Fuse safety protection. 11, The pot is made of high quality stainless steel, durable and durable. 12, Bath handwheel lift. 13, Collection of bottles with a discharge material, easy to evaporate the collection of extracts, discharge. 14, Check valve control, continuous discharge.
Eletronic temperature regulation mode with characteristics of stepless speed adjustable
1. Large-screen LCD, shows temperature, speed, working time. Menu operation interface, easy to operate. 2. Microcomputer control temperature and oscillation frequency with timing functions, Built-in power-off protection can automatically resume operation after power on. 3. Unique air duct breeze circulation, Large observation window. 4. Speed control : Intelligent Brushless DC motor, High speed accuracy, Slow start design, Auto lock if speed out of control. Adjustable starting speed to prevent the splash of shake flask liquid. 5.With function of cutting off UV lamp by open door. 6.Studio at the bottom waterproof, Spills will not affect the normal operation of the machine.
The source of the production raw materials is widely with no regional restriction.The product is made of cement, foam, many kinds of crop straw and norganic material (such as talcum powder, infusorial earth and powder coal ash) after special technology. So this project have low production cost, small investment and fast effectiveness.
1.Applications This cement mortar flexural and compressive strength testing machine is for determining the flexural and compressive strength of moulded mortar specimens. The flexural strength of mortar is determined by three point loading of hardened moulded mortar prism specimens to failure. The compressive strength of the mortar is determined on the two parts resulting from the flexural strength test. 2.Size of mortar for flexural strength test Cement prism specimen: 40x40x160mm 3.Brief introduction of cement flexural and compressive strength test procedure Cement flexural strength test 1)place the cement prism in the test machine with one side face on the supporting rollers and with its longitudinal axis normal to the supports. 2)select the apply rate and apply the load vertically by means of the loading roller to the opposite side face of the prism until fracture. 3)keep the prism halves damp until tested in compression Cement compressive strength test 1)center the prism halves laterally to the platens of the testing machine. 2)increase the load smoothly at a set rate over the entire load application until fracture.
It is used for testing mechanical properties of the inspection chambers and the manholes. It can take load test for the chamber body and ring-stiffness test, lateral compression test, Ring-tiffness test for the chamber riser. Beside the above tests, This machine can be also used for various products' external load resistance test. It is ideal testing equipment for factories, mines, science research department. Available standards: Bs en13598-1:2003 plastics piping systems for non-pressure underground drainage and sewerage - unplasticized poly(vinyl chloride) (pvc-u). Polypropylene (pp) and polyethylene (pe) - part 1: specifications for ancillary fittings including shallow inspection chambers Bs en13598-2:2003 plastics piping systems for non-pressure underground drainage and sewerage - unplasticized poly(vinyl chloride) (pvc-u). Polypropylene (pp) and polyethylene (pe) - part 2: specifications for manholes and inspection chambers in traffic areas and deep under Main technical parameters: Max load: 100kn Measuring range: 1%--100% Load resolution:1n Load measuring accuracy: 1% Speed accuracy:5% Load speed: 5-50mm/min Gate model:4.5mïwidth1.8mïength :2.5mïvalid test space1.71.72.7m
1, the main bracket adopts stainless steel + aluminum alloy, the structure is reasonable, and the materials are exquisite. 2, the sealing system adopts PTFE and imported fluorine rubber combination seal, can maintain high vacuum. 3, the vacuum pressure gauge shows real-time vacuum, and the vacuum can reach 0.098Mpa. Brief Introduction of the 5L Rotary Evaporator 5L explosion-proof rotary evaporator (instrument) is our company in order to adapt to the modern pharmaceutical and chemical reaction test production needs, the RE series rotary evaporator (instrument) and a new generation of products based on the national key institutions joint development and production, the series of products using explosion-proof motor, explosion-proof explosion-proof inverter and intelligent temperature control box. PTFE sealing material, sealing, corrosion resistance, abrasion resistance, frequency conversion speed, smooth operation. RE-501 explosion proof rotary evaporator is an indispensable instrument for evaporation, concentration, crystallization, drying, separation and solvent recovery in the research and production of medicine, chemical and biological products. The rotary evaporator is developed under the condition of vacuum and negative pressure, using the principle of constant temperature heating and thin film evaporation. Rotary evaporator with stepless rotation of the glass bottle rotating at a constant speed, the material is formed large area uniform film on the bottle wall, then the intelligent thermostatic water bath for rotating the bottle uniformly heated at high speed under the condition of vacuum evaporation, solvent vapor by high performance glass condenser cooling, recycling in collecting bottle. Rotary evaporator is working under vacuum, and all material contact part adopts the high temperature resistant borosilicate glass and Teflon material, concentrated especially suitable for biological products of high temperature easy decomposition degeneration and purification.
Working speed: 0-30m/min (depend on geometry of the groove and the physical property of raw material) A) mixing head drived by variable frequency motor, frequency converter is adopting taiwan delta B) metering pump is adopting usa brand C) pneumatic transfer pump is adopting usa ingersoll land D) liqb material tanks (poly and iso) 120l, including heat insulation function and independent temperature control function F) potting machine has a air exhaust function G) potting machine has automatic cleaning function H) mixing head drived by high speed hydraulic motor, rotating speed visual display, and the low speed limit remind function, ensure mixing evenly I) profile positioning adjust double screw, easy adjustment, clamping easily, suitable for all kinds of profile processing J) profile drive adopt large torque hydraulic motor drive K) main valves adopts usa & japan brand L) electrical components adopt schneider and omron brand M) solenoid valve adopts taiwan airtac N) on bridge cut-off part, profile drive adopt large torque hydraulic motor drive, hydraulic unit parts adopt taiwan brand O) profile working scope: width 120mm, height: 120mm. Saw blade highest point can be over the datum level 50mm. P) bridge cut-off machine motor adopt 7.5kw braking motor
