Jsbound weld powders are contained in aluminum foil bag, or plastic bottle, and are packed in boxes, depending on Their size. Different joints require different powder size, and the size relaters to the powder's nominal weight in grams. The weld powder packaging also contains retaining discs and starting powder. The retaining discs and starting powder Are contained in a separate bag within the box. Features: 1.Current carrying (fusing) capacity equal to that of the conductor. 2.Will not deteriorate with age. 3.Permanent molecular bond that cannot loosen or corrode over time. 4.Low labor costs. 5.Made with inexpensive, lightweight and portable equipment. 6.No special skills are required. 7.No external power or heat required. 8.Can be checked for quality by visual inspection. Bags or bottle
Features: 1.Ergonomic two-piece molds use standard handle clamps - the same clamps you use with other jsbound molds. 2.Saves labor costs. A connection can be made by one person in about one minute - much faster than other methods. 3.Simple to use. Box
Product description Sheet metal fabricated steel case For electronic appliance; building; Material: stainless steel Thickness: 1.5mm Dimension: 20*11*8cm By sheet metal fabrication Packing as asked
Welding wire aws er70s-6 We have had about 20-year manufacturing experience, you can choose us , baoding xiangxi wire drawing products co., ltd in china. Co2 gas shield welding wire is used for welding low carton steel and 50kgf/mm 5 grades of high-strength steel structures like vehicles, building, boat, bridge and etc. And can also be used for speed welding of sheet and pipes. - no. :aws er70s-6 - diameter : 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm - specification: 5kg, 10kg, 15kg and 20kg packing in plastic spool. We are looking forward to establish a long business relationship with you. Welcome foreign businessmen to come my factory for visiting, inspecting and ordering sincerely. Cartons lined with the plastic spool
1.99.9% copper 2.Q235 steel 3.Copper thickness:>=0.254mm 4.Tensile strength:>=500n/mm2 5.Offer oem service Specifications Copper bonded ground rod is applying 99.95% pure copper on low carton steel by electroplating. Ground rod technical specification: 1) copper purity is 99.95%. 2) copper layer is over 0.2mm . 3) the steel core is low carbon steel, and the carbon content is about 0.15%. 4) the steel core has a tensile strength not less than 570nm/mm2. 5) the ground rod is fully covered with copper cladding without any cracks, holes, cavities etd. Preventing exposure of the steel core to soil and moisture. The ground rod is suitably treated to prevent oxidation of copper bonding. 6) the ground rod is capable of being bent 90 degrees at a maximum radius of 100mm with no copper fracture and with no ill effect on the bond between the steel and the copper cladding. 7) good in anticorrosion that usage-life is more than 50 years or more, constant low resistance and good plasticity which had the characteristics of copper as well as steel We can supply ground rod in all sizes and shapes, threaded and/ or tipped. 1) ground rod can be made double heads thread, thread can be packed by plastic sheath 2) one end is pointed and the other end is threaded for extend 3) one end is pointed and the other end is flat. *special sizes and copper thickness can be supplied on request In bundles and pallets
1.99.9% copper 2.Q235 steel 3.Copper thickness:>=0.254mm 4.Tensile strength:>=500n/mm2 5.Offer oem service Specifications Copper bonded ground rod is applying 99.95% pure copper on low carton steel by electroplating. Ground rod technical specification: 1) copper purity is 99.95%. 2) copper layer is over 0.2mm . 3) the steel core is low carbon steel, and the carbon content is about 0.15%. 4) the steel core has a tensile strength not less than 570nm/mm2. 5) the ground rod is fully covered with copper cladding without any cracks, holes, cavities etd. Preventing exposure of the steel core to soil and moisture. The ground rod is suitably treated to prevent oxidation of copper bonding. 6) the ground rod is capable of being bent 90 degrees at a maximum radius of 100mm with no copper fracture and with no ill effect on the bond between the steel and the copper cladding. 7) good in anticorrosion that usage-life is more than 50 years or more, constant low resistance and good plasticity which had the characteristics of copper as well as steel We can supply ground rod in all sizes and shapes, threaded and/ or tipped. 1) ground rod can be made double heads thread, thread can be packed by plastic sheath 2) one end is pointed and the other end is threaded for extend 3) one end is pointed and the other end is flat. *special sizes and copper thickness can be supplied on request In bundles and pallets
1.99.9% copper 2.Q235 steel 3.Copper thickness:>=0.254mm 4.Tensile strength:>=500n/mm2 5.Offer oem service Specifications Copper bonded ground rod is applying 99.95% pure copper on low carton steel by electroplating. Ground rod technical specification: 1) copper purity is 99.95%. 2) copper layer is over 0.2mm . 3) the steel core is low carbon steel, and the carbon content is about 0.15%. 4) the steel core has a tensile strength not less than 570nm/mm2. 5) the ground rod is fully covered with copper cladding without any cracks, holes, cavities etd. Preventing exposure of the steel core to soil and moisture. The ground rod is suitably treated to prevent oxidation of copper bonding. 6) the ground rod is capable of being bent 90 degrees at a maximum radius of 100mm with no copper fracture and with no ill effect on the bond between the steel and the copper cladding. 7) good in anticorrosion that usage-life is more than 50 years or more, constant low resistance and good plasticity which had the characteristics of copper as well as steel We can supply ground rod in all sizes and shapes, threaded and/ or tipped. 1) ground rod can be made double heads thread, thread can be packed by plastic sheath 2) one end is pointed and the other end is threaded for extend 3) one end is pointed and the other end is flat. *special sizes and copper thickness can be supplied on request In bundles and pallets
Made out of PVC material 16mil thickness (0.4mm) UV resistant Color: Red, Dark Green, Orange, etc Regular size: 6ft x 6ft & 8ft x 6ft This curtain is used to barricade the area where welding is carried. We can customize the size of blanket as per client requirements 8ft x6ft
Payment: T/T, L/C Delivery: 25 days after the order confirmation Package: standard package or as you required We offer customized products for your specific need. For more information about our products. Please
CO2 gas shielded welding wires, this series welding wires can be used for welding low carbon steel and low alloyed steel structure, such as ships, vehicles, bridges, engineering machinery, pressure vessel and construction etc. Size: 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.4mm, 1.6mm, 2.0mm. 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.4mm, 1.6mm, 2.0mm. 5kg/15kg/20kg per spool, one spool in a cartonn, 72cnts on a pallet.
Submerged ARC welding wires are used with corresponding flux to get metal welding with excellent machinery properties. They have a series of advantages, such as high production efficiency, stable welding quality, beautiful welding bead appearance, deep penetration, etc. Size: 2.0mm, 2.4mm, 3.2mm, 4.0mm, 5.0mm.
Sizes: 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm. Packing: 5kgs/spool/carton, 15kgs/spool/carton, 250kgs/drum.
Carbon Steel Steel Flux Cored Arc Welding E71T-1 E71T-1 is an all-position, flux cored welding wire, which is intended for single and multiple pass welding of low-alloy and carbon steel where a minimum 70,000 psi tensile strength and good notch toughness is required. It is an excellent general purpose welding wire. This wire has very low fume, stable arc, good slag removal and excellent mechanical properties. AWS Specification: AWS A5.20 AWS Classification: E71T-1 Typical Applications: • Buff and fillet welding of hulls and storage tanks • Structural steel • Farm machinery • Construction equipment • General carbon steel fabrication Welding Current: DCEP (Electrode Positive, Reverse Polarity) Typical Wire Chemistry: 100% CO2 75%Ar/25%CO2 C: 0.05 0.05 Si: 0.56 0.64 Mn: 1.39 1.61 P: 0.008 0.005 S: 0.014 0.01 Welding Positions: All Positions Typical Mechanical Properties (As Welded): Typical Mechanical Properties (As Welded) : 100% CO2 75%Ar/25%CO2 Yield Strength, Mpa: 480 470 Tensile Strength, Mpa : 570-690 560-690 % Elongation: 25.8 26.5 Available Diameters: 0.8mm, 1.0mm, 1.2mm, 1.4mm & 1.6mm Available Spools: plastic spool and metal basket Available Weight per Unit: 0.9kg, 1kg, 5kg 15kg. In standard export packing or on customer requirements.
This wire is engineered to provide porosity-free, x-ray quality welds at the highest tensile strength (as welded) of all the plain carbon steel wires. This product requires a shielding gas: CO2 and/or CO2 mix. Typical Wire Chemistry: C: 0.09 Mn: 0.98 Si: 0.59 P: 0.01 S: 0.012 Welding Positions: All Positions Typical Mechanical Properties (As Welded): Yield Strength, Mpa: 420 Tensile Strength, Mpa: 510 % Elongation: 22 Available Diameters: 0.6mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.4mm & 1.6mm Available Spools: plastic spool and metal basket Available Weight per Unit: 0.9kg, 1kg, 5kg, 12.5kg, 15kg, 20kg, 27kg, 250kg and 350kg.
Model number: aws e6013 Material: carbon steel Length: 300-450mm Operating current: 50-240mm Welding current : 50-240mm Operating temperature: common Diameter: 2.0-5.0mm Application: mild steel structure Color: gray green blue and red Guage: 8, 10, 12, 14 Coating: rutile Core wire: H08A.
Our company specialized in producing stainless steel welding wire and valve steel for many years. Package methods includes wooden reel package and woven bag package. The weight of wooden reel package is about 450kg; woven bag package is about 120kg.
SSTS are professional in supply the Aluminum welding wire as following all the surface of welding materials are smooth and clean the welding wire are labeled with production number and date even the source materials are kept for investigation A, Detailed product Description: ER1200/1100/1070: The product has good ductility and corrosion resistance suitable for oxyacetylene gas brazing pure aluminum as well as argon arc ER4043/4047/4145: good corrosion resistance wide range of usage used as fulling masterials whiles gas welding and organ arc welding of aluminum alloys other than high magnesium alloys. A-1 Package Detail : MIG wire TIG rod ` Dia: 0.8mm -1.6mm 1.6mm-4mm*1000mm 0.5kg/spool 2kgs/spool 4mm-8mm*1000mm 7kgs/spool B,Technical standards as per AWS related standard Alloy 99.0min Fe & Si Fe Si Mn Zn Mn Cu Ti Cr ER1100 rem 0.095 0.05 0.10 0.05 0.10 ER2319 rem 0.30 0.20 0.20-0.40 0.10 0.20-0.40 0.10 0.10-0.20 ER4043 rem 0.80 4.5-6.0 0.05 0.10 0.05 0.10 0.20 ER4047 rem 0.80 11.0-13.0 0.15 0.20 0.15 0.20 ER5356 rem 0.40 0.25 0.05-0.20 0.10 0.05-0.20 0.10 0.06-0.20 ER5183 rem 0.40 0.40 0.5-1.0 0.25 0.5-1.0 0.25 0.15 0.05-0.20 ER5554 rem 0.40 0.25 0.5-1.0 0.25 0.5-1.0 0.25 0.05-0.20 0.05-0.25 ER5566 rem 0.40 0.25 0.5-1.0 0.25 0.5-1.0 0.25 0.05-0.20 0.05-0.20 ER4145 rem 0.80 9.3-10.7 0.15 0.20 0.15 0.20 0.15.
SSTS are professional in supply the Brazing welding rod, such as: low silver brazing rod Bcup-2 ( Harris 0), and high silver content brazing welding rod Bag-20 etc, Factory is load in Ningbo of China who have over 10 years produce experience, round rod, flat rod ,also welding ring is ok for us never mind what size . A, Detailed product Description: A-1 Low silver content braizing welding metal: Standard Chemical composition(%) AWS (JIS) P Ag Cu Sn Sb Sodify Lipuefy Use temp Bcup-1 4.8-5.3 / Rem / / 705 925 710-930 Bcup-2 6.8-7.5 / Rem / / 710 795 735-845 BCup-3 5.8-6.7 4.7-6.3 Rem / / 645 815 720-815 Bcup-4 6.8-7.7 5.8-6.2 Rem / / 645 720 690-790 Bcup-5 4.8-5.3 14.5-15.5 Rem / / 645 800 705-815 Bcup-6 6.5-7.2 1.8-2.2 Rem / / 645 790 730-815. Technology Bcup-1 It is the highest temperature of the P Cu solder widely used in Gas appliances Bcup-2 Good flow property economical widely used in the brazing of presenting in air-conditioners and the no-verbatim load areas Bcup-3 Have certain plasticity suitable for brazing copper alloy and some copper ¨Cwhich can¡¯t conjugate tightly BCup-4 It is of low melting point It is especially fit for the automatic braze welding it has been largely applied in the soldering with four way valve and cut-off valve Bcup-5 Bettered plasticity and conductivity of joint suitable especially for brazing copper and copper alloy with vibration load Bcup-6 Widely used in brazing copper and copper alloy in the fields of air-conditioning and mechanical-electrical good flow property and filling capability. A-2 High silver content brazing rod The silver borer material is a kind of borer material with silver base or the silver base, have fine craft,performance, low dissolves temperature ,good moisture and the ability to fiil-up interval ,and the high intensity ,good plasticity ,good electric aluminums ,magnesium and other low melting lamp manufacture ,ironware & electric apparatus ,instrument & apparatus ,chemical industry ,Aero-Space ,etc AWS Chemical ingredient (%) Temperature Principal areas of application Ag Cu Zn Sn Ni Solidus Liquidus Use temp Bag-18BSn 17-19 44-46 31-35 1.5-2.5 / 770 810 810-880 High melting point ,and braze copper and steel without cadmium Bag-25B 24-26 40-42 32-36 / / 700 800 800-890 Good wetness and filling property ,suited for brazing copper, copper alloy and steel with higher melting point Bag-20 29-31 37-39 30-34 / / 677 766 760-840 Suited for brazing copper, copper alloy and steel with low melting point and good techniac Bag-35B 34-36 31-33 31-35 / / 621 732 730-810 Suited for brazing copper ,copper alloy and steel with low melting point and good technics, the melting point lower than 30silver Bag-28 39-41 29-31 31-35 1.5-2.5 / 650 710 710-790 It is the fine flow-ability. It is applicable for ferrite steel and none ferrite steel welding Bag-4 39-41 31-33 26-30 / / 677 732 730-810 Mid-level melding range ,good ductility and penetrability economical and penetrability economical Bag-36 44-46 26-28 23-27 2.5-3.5 / 645 680 680-760 Used generally for brazing the part required cleanliness face in mechanical-electrical and food industries due to its perfect general features, good ductility and penetrability Bag-6 49-51 33-35 14-18 / / 690 775 770-850 Used for brazing these materials under vibration load in electrical and food industries Bag-24 49-51 19-21 26-30 / 1.5- 660 707 710-790 Suited for brazing stainless steel with improved capability of resistance of crevice corrosion 2.5 Bag-7 55-57 21-23 15-19 4.5-5.5 / 618 652 650-720 Suited for brazing stainless steel in food and other industries with low melting point, high penetrability good ductility and corrosion resistance property B-Package detail : A1, A2 Size (mm) Rod style Package style 0.5mm~1.0mm wire 15kgs/spool; 10kgs/coil 1.2mm~5mm*500mm Round rod 1 lb/tube; 0.5 or 1 or 2 or 5kgs/ pp bag, then 10 kgs or 20kgs/ctn; 500kgs/wooden box. 1.3mm*3.2mm*500mm Flat rod 1 lb/tube; 0.5 or 1 or 2 or 5kgs/ pp bag, then 10 kgs or 20kgs/ctn; 500kgs/wooden box. 3.2mm*3.2mm*498mm.
"TAA"CO2 gas shielded welding wires have excellent technological properties such as smooth steady feeding,fast melting rate,high depositing efficiency,little spatter and beautiful seam,which are suitable for all-position welding work. The series of welding wires are mainly suitable for welding low carbon steel and low alloyed steel structure,such as ships,vehicles,bridges,engineering machinery,pressure vessel and construction etc. Standard: AWS ER70S-6 Diameter:0.6mm-2.0mm Package:15kg/D270mm black spool,1080kg or 1260kg/pallet.
MAPP GAS physical property: Actual burning temperature: approach to 3600 degree fahrenheit The full burning time: nearly 2hours and 40mins Scientific blend proportion and good flame to guarantee good welding result and shorten working time Pressure(psig)110 psig, at temperature 20 celsius degree Portable for using. G.W.890g /cyl, N.W. 453.6 g/cyl,12 cyls /ctn, 17004 cylinders per 20ft container.
