Inside worktable size:w1320*l2290 Outside worktable size:w1200*2290 Cutting height h800/1200mm Paper and film
Simple to use Extremely short process times Inside and outside polishing frequently possible High-precision chamfering No damage to your work pieces, because the parts do not touch Highly effective and efficient Rapid retrofitting of clamping devices allows for several batches to be processed Time and cost savings due to simple handling technology Maximum flexibility Short setup times . MFD 300 Dimensions approx: 2000 x 1300 x 2200 +450mm Weight approx: 750kg.
The MF 22 is equipped with a tried-and-tested ceramic-ring setting system, available optionally as a 1, 2, 3 or 4-container system, each with a 22 liter container. Special versions, for instance, such as 6 to 8-container systems are also feasible. Features a modular design ideal for processing precision components. Easy handling, trouble-free operation. Width = 58 cm Depth = 99 cm Height = 149 cm 22 Liters 110 kg 0,85 kW 230 Volts.
Application: This model of honing machine is used for Taper & Cylindrical Roller Bearings races of dia 40 to 200mm. It includes honing of both type of races, Inners & Outers. Design Features: It has unique rigidly compact & more effective stick holder and oscillating unit which makes the easy operation and settings. Operation: Operator has to put the job on the table having two driving and two idler rollers. Then press the ON button to start the cycle. The complete cycle is finished within 10 to 30 seconds as per the size of the job. Oscillation speed can be set by A.C. Drive. The job speed is controlled automatically by driving rollers. The job track geometry gets corrected and required honing result is achieved by using proper grade and grit of stick. It is useful for lot production in bearing industry. Features: * Consistent and better quality of the honing track surface. * Required surface Ra- value for bearing track is achieved within few seconds. * Easy operation and setting. * No wastage of oil as the complete body enclosed during the process. * Energy efficient. * Less floor space required. * No any extra adaptor or accessories required.
Application: This model of honing machine is used for Taper & Cylindrical Roller Bearings races of dia 40 to 200mm. It includes honing of both type of races, Inners & Outers. Design Features: It has unique rigidly compact & more effective stick holder and oscillating unit which makes the easy operation and settings. Operation: Operator has to put the job on the table having two driving and two idler rollers. Then press the ON button to start the cycle. The complete cycle is finished within 10 to 30 seconds as per the size of the job. Oscillation speed can be set by A.C. Drive. The job speed is controlled automatically by driving rollers. The job track geometry gets corrected and required honing result is achieved by using proper grade and grit of stick. It is useful for lot production in bearing industry. Features: * Consistent and better quality of the honing track surface. * Required surface Ra- value for bearing track is achieved within few seconds. * Easy operation and setting. * No wastage of oil as the complete body enclosed during the process. * Energy efficient. * Less floor space required. * No any extra adaptor or accessories required.
Plate bending machine Primarily uses in the aluminum modeling the duplicate plywood, the pure aluminum sheet, the stainless steel plate volume board and aluminum composite panel processing, the structure is reliable, energy consumption low, manual regulation, ease of operation. Main technique parameter: 1max. Volume board thickness:6mm 2max. Volume board width:2500mm 3bending speed:7.16m/min 4voltage:380vac 5power of main motor:7.5kw 6overall dimensionlwh:430012001330 mm 7weight:4600kg.
It pasting size 2inch to 22 inches of box, pasting capacity 40000 box p/h. It with prefold system necesary for farmacutical boxes. Power 3hp dc moter. Base on havey duty chanels. Weith 18 feet x 3 feet x 3.5feet. Weight 1800 kg. In two part. Folding glueng and pasting. With automatic digital counter. Operating remote system for box seting .
1.This type of bits are used in low press resistance soft to medium formation, shales, clay, salt, etc., it can work in a high rpm and low wob with fast drilling speed. 2. Surface of cones and teeth are hard enhanced to extend the working life of bit. 3. Teeth distributed optimal design largely improve the working efficiency of breaking down s
1 pc type milling machine flp 1600x6000, titan romania, 1974(the components are generally in function, but need some repairs for aôgood lookö). If you have interest in that, please make a offer or contact us for more details. 49000 euro û ex-works timisoara, romania Milling planner titan model flp 1600 Year of manufacture 1974 Good working condition Location : timisoara, romania Technical details : Table: 5930 mm x 1600 mm Max. Work surface of table: 4250 mm x 1600 mm 83 tons - 1 pc horizontal milling machine model 2620v, urss û 15000 euro ex-works timisoara, romania- 15-20 tons.
Extra Heavy Duty Hydraulic Presses (Export Quality) Salient Features: * Also available in fully auto PLC controlled models. * Highly Automated but very simple in operation through three manually operated Direction Control Valves. * Single compact unit mounted over solid girders (I - Beam). * The above data are indicative and not binding.
Single Action Hydraulic Baling Press (Scrap Processing Machines) Salient Features: * Highly Automated but very simple in operation through one no. Manually operated Direction Control Value. * Single compact unit mounted over channel. * No Civil Foundation is required. * The above data are indicative and not binding. Optional Features: * Replaceable wear-resistance plates can be provided for long life of the feeding chamber.
Shearing Machines Salient Features: * Shearing Blades are made out of a special grade steel. * Heavy gear- pinion, pully and drive shaft. * Easy to operate continuously. * The above data are indicative and not binding. Optional Features: * Shearing Blades can be provided extra against cost. * The Shearing size can be modified as per your requirement, accepting the same under the sole discretion of HEW.
Triple Action Hydraulic Baling Press (Scrap Processing Machines) Salient Features: * Highly Automated but very simple in operation through two nos. Direction Control Values, one for Three side Pressing Automatically and other to delock and to eject the pressed bale. * Single compact unit mounted over solid gridders(I - Beam). * No Civil Foundation is required except one pit for Ejector Cylinder. * The above data are indicative and not binding. Optional Features:(Against Charges) * Replaceable wear-resistance plates can be provided for long life of the feeding chamber. * Shearing blades on the Edges of the Chamber and Top Lid to shear the excess and over size scrap. * Heat Exchanger to keep the oil cool.
Ribbon Blender Salient Features : * High mixing efficiently * Spray nozzles can be provided for spraying additives * Prefect distribution of even smallest quantities * Homogenized final product * Low space and height requirement * Shearing / kneading action/ Jacketed design.
Octagonal Blender Salient Features ò Batch type Blender ò Only Blender with 80% working volume ò Highly efficient & uniform mixing ò Low mixing time/Zero holdup after discharge ò Low height/Rectangular manhole for CIP ò Low power consumption ò Automatic charging arrangement ò Capacity upto 10000 liters
Agitated Nutsche Filter Salient Features ò Closed batch types operation ò Repeated & effiecient wash with reslurrying. ò Vacuum or pressure filtration ò Operation from Control panel ò No toxic fumes in operating area ò Very high Solvent recovery ò Minimum Labour required ò Drying of wet cake under Vacuum Application ò Pharmaceuticals ò Pesticides ò Organics/ Inorganic Chemicals Material of Construction ò Carbon Steel ò Stainless Steel ò MS Rubberlined ò Hastelloy Filtering Operation : ò Slurry is charges to gravity or pump vacuum is applied in bottle section through filte receiver ò Filtrate is collected through the filter bed & collected in Receiver, located below the lower compartment of filter & cake layer begin to form slowly on filter plate. ò After 1st filtration is over, cake shall have almost 10 to 30% moisture ò After 1st stage filtration , wet cake can be reslurried & spray washed by rotation agitator in clockwise & anticlockwise direction with up & down movement of agitator. ò Cake is further pressed & Squeezed by rotating agitator in up & down motion to minimize liquid content in wet cake. Cake is discharged through Discharge nozzle by rotating agitator in reverse direction. Drying Operation ò For maximum recovery of liquid & drying vacuum is applied on top chamber & cake is heated by applying hot water / steam to form solvent vapour, which is turn is condensed in the condesor & collected in receiver. ò Cake is finally discharged automatically by vertical & reverse rotary movement of agitator.
Planetary mixer * batch type mixer * suitable for paste, adhesives and plastic materials. * homogeneous mixing by planetary motion of two beaters & a homogenizer at center. * jacket provided for heating & cooling. * vacuum can also be applied for removing the entrapped air.
Wire draw machine.
This press finishes the shirt collar and two cuffs in a single operation and the yoke in a second operation. Built on our world renowned heavy duty UA frame with cast-iron "Y"piece assures years of trouble-free production. Collar/Cuff presses comprise one part of a unique shirt system designed specifically to help you increase productivity while saving your operating costs. Specifications MODEL : GMH-8 Steam Requirement Steam Inlet-NPT(DN) : 1/2"(15) Steam Outlet-NPT(DN) : 1/2"(15) Steam Pressure-psi(bar) : 100(6.9) Steam Consumption-bhp(bar) : 0.99(15.4) Dimensions/Weights Width-in(mm) : 44.49 (1130) Depth-in(mm : 43.31(1100) Height-in(mm : 48.03(1220) Net Weight-lb(kg) : 700(315) Shipping Dimensions (crated) : 60.63(1540)x56.69(1440)x51.97(1320) LxWxH-in(mm) Shipping Weight-lb(kg) : 882(397)
The GMH-42 design allows you to press one leg from two pairs of pants at one time. It is also the right choice for crisp clean pressing of those extra thick items like pillowcases. The buck and head are designed to handle items, regardless of width or thickness, in just one lay. Low maintenance and easy access make GMH-42 extremely service-friendly and easy to operate. Specifications GMHSERIES Model GMH-42 Depth 42-1/4" (1073mm) Width 47-1/4" (1200mm) Height(Closed) 48-3/8" (1229mm) Steam Inlet 1/2" (DN15) Steam Outlet 1/2" (DN15) Steam Pressure 125PSI Air Pressure 80PSI Net Weight 790LBS (357KG) Shipping Weight 824LBS (372KG)
