MD860 Enamel Baked Shell Continuous Sealer With Printer Features: It can print 6 items, sterilization date, expiry date, bag name, autoclave number, cycle number and personal number. The temperature and date are available to set and adjust. Three fonts and three intervals of wording can be selected with one line print-out. Six items can be printed with minimum line length 65mm. Printing function can be paused while only sealing function remains. Sealing width: 12mm. Sealing speed: 10m/munite. Working temperature: 30-230. Difference of temperature. Internal timer, internal calendar and safety thermoprogrammer are installed. Automatic adjustment of sealing pressure fits to thickness range of the pouches. Adjustable depth of feeding. Automatically starts while feeding. Heat keeping for the next feeding can be adjusted within 120 minutes before turning to stand-by to save power. Install the cassette of ink ribbon in front of the cover. Internal matrix printer. Power: 400W, 220V or 110V,50/60Hz. Size: 610 290 240mm Weight: 22.5Kg.
MD680st. Standard type. Stainless steel upper house+baking enamel lower house+manual start 1.Stainless steel cover; 2.Four-line sealing, 12mm sealing width;Adjust sealing brim 0-30mm 3.Digital temperature control: 30-200 selectable; 4.Temperature difference: 5.Sealing speed: 10m/minute; 6.Power consumption: 400W; 7.Voltage: 220V, 50Hz (option: 110V); 8.Size: 495*252*146mm;Packing: 660*370*285mm 9.Net weight: 12.7 kg; Gross weight: 14.5 kg We Accept DHL,UPS,Fedex, International Shipping AirLine,Ocean Shipping etc.
This machine produces 2 edge protector of the same size, one above the other, at the same time. 1-Adjustable paper guiding and Kraft folding section 2-7,5 Kw 102 rpm Motor (Bangle Bottom Pressing Rollers) 3-7,5 Kw 152 rpm Motor (Bangle Upper Pressing Rollers) 4-Pneumatic Angle Pressing System 5-Electronic Speed Controller (Towing Groups) 6-Top Moving Press Rollers 3 Groups Diameter 135mm 7-Lower Moving Press Rollers 3 Groups Diameter 285mm 8-Paper Angle Making Feature Min 30x30 Max 120x120 9-Eccentric Servo Cutter Section (Servo motor brand SEW EURODRIVE) 10-Guillotine Blade System 11-Min : 50 mm Max : 6000 mm Cutting Length 12-Operator Control Panel (7'' Beijer brand) 13-The maximum speed of the machine is 80 mt/min (can be optionally increased to 100 mt/min) 14-Maximum blade cutting thickness is 8 mm.
Torque reduction sub is mainly connected between short radius horizontal section and large angle well section, propose to connect a torque reduction sub by every 60ft, it can reduce 25%-35% torque after using this tool, it's slip spiral inner sleeve, straight rib outer sleeve and body mandrel are relatively in non-rotating condition. Features & Benefits: Reduce drill string wear and fatigue; Minimizes torque and drag; Minimizes casing wear; Increase ROP; Dampens vibration; Enhances drilling efficiency.
1 X Benninger Supertronic Sectional Warper Make : Benninger Model : Supertronic Year : 1995 Working Width in cm : 250 No. Of Creel : 800
Wire Nail-Making Machine Type of Machinery SM-03 Construction use
1 X Rieter RSB D35 Finisher Drawing With Autoleveller Make : Rieter Model : RSB D35 Year : 2003 No of Deliveries : Single Delivery Can Dia : 20" Can Changer : Auto Creel Type : Power Creel Feed Can Dia : 20"
1 X Xetma Optima XS 1 Shearing Make : Xetma Model : Optima XS 1 Year : 2004 Fabric Width (mm) : 3400
1 X Benninger Ben Direct Direct Warper Make : Benninger Model : Ben Direct Year : 1998 Working Width in cm : 160
Specifications: Temperature range: RT+10~50 C Standard wire warp of metal net: 50um; Standard spacing between wires: 75um â?¢ Test dust: dry talc powder; Talc powder dosage: 2~4kg/m; Dust reduction method: free dust reduction â?¢ Total test time: 0~999H (adjustable); vibration time: 0~999H (adjustable); timing accuracy: �±1 second Vacuum: 0~10Kpa (adjustable); Pumping speed: 0~4800L/H (adjustable) Power supply of test samples: single-phase 220V/50Hz or 100V/60Hz Safety protection function: leakage protection, short circuit protection The shell is made of domestic high-quality steel plate, and the surface is sprayed with paint, which is beautiful and durable. The inner box, sample rack, etc. are made of stainless steel plates to ensure that they will not rust for a long time. There is a transparent observation window (toughened glass material) on the door, and an LED lighting lamp is installed in the box to facilitate the observation of the internal test situation. â?¢ There is a device for replacing dust at the bottom of the device, which can easily 100% replace the used dust. A special device is installed to ensure that the dust does not stick to the wall and condense. The working time of the device is adjustable, and it can work automatically and alternately. There is a suction pipe in the box, which can complete the vacuum action on the sample (require the sample to reserve the suction hole position). Dust chamber testing control system: 7-inch touch screen + Panasonic PLC. The dust blower, dust vibration and total test time can be controlled separately. This controller has the following various arbitrary setting control functions: 1. Dust blowing time (stop, blowing): can arbitrarily choose any of continuous and periodic dust blowing time to setting; 2. Vibration time: vibration and stop vibration time are automatically alternated; 3. Preset test time: the maximum test time is 99 hours and 59 minutes; Heating system: The circulating air duct is equipped with a heater to heat the dust to avoid dust condensation. The heat of the muffler mica sheet heating ring is safe and stable. Vacuum system: equipped with vacuum pump, vacuum pressure, air filtration, flow meter, pressure regulating triplet, connecting pipe.
Product Description JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2:2013 Degrees of protection provided by enclosures(IP Code), IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test organization for the products such as electrical & electronic products, LED luminaires as well as in the relevant quality control department for the waterproof detection of the enclosures protection grades. The whole JL-X waterproof test system includes: â?¢ Drip Box (JL-12): The drip box is for IPX1 and IPX2 drip test. The drip box size is 800x800x45mm (LxWxH). The diameter of drip hole is 0.4mm. The distance between drip holes is 20mm. The sample can be over 150kg. â?¢ Swing Pipe Water Spray Test Equipment (JL-34): It is for IPX3 and IPX4 waterproof test. The semi-diameter of swing pipe is 1meter (Any other size is also available). The inside diameter of the swing pipe is 15mm. The sample rotating table diameter is 1000mm (Or other size according to the diameter of the swing pipe), and the height is adjustable. The rotation speed is 1~5rpm which controlled by PLC panel. Waterproof Jet Test Device (JL-56): With water supply device size is 1000x1000x600mm, the nozzle diameter is �?6.3mm (IPX5 waterproof test ) and �?12.5mm (IPX6 waterproof test). The water speed is 12.5 �±0.626L/min for IPX55 and 100 �±5L/min for IPX6 â?¢ Immersion tank Waterproof test Device (JL-7): It is for IPX7 waterproof test. The water tank size is 1000x1000x1200mm (Other size can be designed according to your request). It can test samples up to 120kg. â?¢ Immersion tank Waterproof test Device (JL-8): It is for IPX8 test. It can simulate a water depth of 0~50m. The water immersion tank diameter is 600mm and the height is 1200mm. The compressive stress is 10 atmospheres or design according to customer's request.
*Intelligent identification, intelligent networking, powerful functions, small size, light weight, continuous cutting and sealing printing, also can be single-cut, single-sealed, it is a highly efficient and preferred product in the new era; *Six printing and sealing parameters can be intelligently real-time monitored: test date, temperature, pressure, speed, operator and machine number. *External printer can print 9 parameters of label contents, one-dimension bar code, two-dimension bar code; *Share the database of CSSD traceability management system V6.0 in the external LAN; *The external scanner can quickly select data entry and query; the cutting and sealing machine and the U disk can import and export data from each other; comply with work report and work count of the CSSD traceability management system
shoes machine,shoe making machine,Shoe production line,machine mking shoes ,sole marking shoe making machine,slippers shoe making machine,shoes heel nailing machine shoes making machines,shoe sole making machine shoe moulding machines,shoe polish making machine,shoe making heel making machine,shoe manufacturing machines,sport shoes upper making machine,shoes production machine,shoes machine making
D Vpper moulding machine FEATURES 1. Any Bklocking Angle No More Double Cutting. 2. Accuracy And Repetitivityï¼?Synthetic Or Leatherï¼?Any Vamp Size. 3.Perfect Shaping Effect,Short Shaping TimeCan Be Customized According To Demand. 4. Remaining effect no additional conditioning;required, after the shaping, there is no knife mark on the upper, it will not break, it will not wrinkle. 5. Precise positioning 3D stickers. 6. Any leather or sophisticated synthetic material,multi-purpose machine, can be used as the upper twice after changing the moldthe setting machine is used.Any Blocking Angle No More Double Cutting Accuracy And Repetitivity Synthetic Or Leather Any Vamp Size Perfect Shaping Effect, Short Shaping Time Can Be Customized According To Demand
This plastic recycling pelletizing machine is matched with the crushing and cleaning machine and the pellet cutter. Broken and cleaned plastic can be directly put into extrusion granulation. Simple process, advanced technology, and is suitable for different waste plastics. Plastic pelleizing machine adopts automatic temperature control and electromagnetic heating, with less electricity, no pollution, and high automation.
One of the pieces of equipment in the PET bottle recycling line is the PET bottle crushing machine. The primary goal of the PET bottle crusher is to disassemble whole PET bottles. Customers working in the plastic bottle recycling sector must choose this equipment.
Thermal Energy Storage System (CWTES). This system utilizes only the sensible heat of water for cooling energy storage in a chilled water storage tank and discharges the stored coldness for air-conditioning during the on-peak time. The key technology of Chilled Water Storage system is the diffuser design which ensures thermal stratification of chilled water and warm water by density difference. FTEnEâ??s technology is the state of the art technology which is recommended in ASHRAEâ??s design guide. They have a long history of installation around the world including U.S.A., Japan, Korea and middle-east Asia. Some key features of Chilled Water-Thermal Energy Storage Cooling: Lowest initial investment cost 30-40% energy saving by utilizing conventional chillers whose Efficiency is higher than low temperature chillers Simple system with easy controls without additional heat Light in weight compared to Si-Br. Exchangers and less equipment Efficiency of discharging coldness is very high Easy to convert conventional system into CWTES system by Adding only chilled water storage tank Convertible to heating purposes Environmentally friendly system free from brine Storage water can be utilized for fire-fighting in emergency
Pioneers in the industry, we offer multi effect evaporator, agitated thin film dryer, industrial wastewater evaporators, mechanical vapor recompressor, vacuum evaporation equipment and falling film evaporator plant from India. We Design, Manufacturer, Supply, Erection and commission various types of Multiple Effect Evaporators mentioned as below... Falling Film Evaporator Forced Circulation evaporator Falling + Forced Circulation (Combination) Evaporator KEY FEATURES : Simplified Functionality Offers Customized Solutions Saves On Production Cost Consumes Less Energy
Introduction Various Fumes & Gases like HBr, NH,, SO, H,S, Br,, BF, CO, CL, etc. is generated as byproduct gas during various chemical reactions. It needs to be treated by means of scrubber prior to discharge in Atmosphere. We Offers complete Absorption / Scrubbing System which generates commercial grade byproduct wherever possible which can be sold or used in other processes. For Other Gases we provide High Efficiency Scrubbers/Degassers as per requirement. Features Custom engineered Absorbers/Scrubbers to handle HBr, NH,, SO,, CL, H,S, Br, etc. Optimally designed Column Internals to increase the mass transfer efficiency. No Flange Joints in Liquid Pipeline (All Socket Union)- Avoid Flanges & Gaskets (minimum hassles). European Make Valves & Rotameters. Very Low Operating Cost. Offered in PPH, PVC, PVDF, PFA, ECTFE, Molded FRV Construction.
Economizer (Water Pre-Heater) Empowered with a team of passionate personnel, we are engaged in offering a broad collection of Boiler Economizer. The offered economizer is mechanical devices intended to reduce energy consumption or to perform a useful function such as preheating a fluid. Our provided economizer can make use of the enthalpy in fluid streams that are hot, but not hot enough to be used in a boiler, thereby recovering more useful enthalpy and improving the boilerâ??s efficiency.
