Features The whole structure and shape of the machine is very compact with the charter of high speed, high precision and high reliability. Integrating the latest technology. High Speed Multipurpose Slitting / Slitting and Holographic Tape Application The Machine can handle material V.I.Z. PVC/PET/OPP/CPP Printed or unprinted Wastage (Trim) Section with blower Pneumaticaly operated clutch/ lay on roller/ Slitting shafts All rollers are dynamically balanced Pneumaticali operated unwind and wind shafts Electronic edge guide system Technical Specifications Machine Working Width 500mm Core I.d 76 mm (in all the unwinding and winding stations) Material (slitting) PET /OPP/CPP/ PVC Material Thickness 10~120 Microns Material (application) Holographic self adhesive tape with pre-printed pet 20 microns Max Unwind/re-wind Roll Dia. 650 mm Slitting Speed 0~250 Mtrs. / Min Lamination / Application Speed 0~150 Mtrs. / Min Mechanical Speed 300 Mtrs. / Min Electric Supply 380~415 v, 3 Phase, 50 Cycles Tension Controllers Unwinding Tension Controller Rewinding Tension Controller Winding Tension Controller Edge Guide / Line Guide System Edge guiding system of BST or E + L Make Minimum Slitting Width 4 mm Total Power Requirement 7.5 HP (5 K.W.) Dimension LxWxH 2.5Meter x 1.5Meter x 1.2Met
High Speed Fully Automatic Hologram Hot Stamping Machine Suitable for Hot Stamping of Hologram/signature Label/Silver Foil Stamping/Scratch Foil Stamping, The Machine Consist, Loading Magazine with capacity of 300 to 350 Cards Depends upon The Thickness. Technical Specifications Applicable Material PVC/ IDI of ISO 7816 and other Plastic Material Thickness Of Material 0.7-0.9mm (ISO 7816) Size Of Material Standard Size ( As ISO 7816) Card Loading Input/output Tray Type Magazine Type Loading/unloading Capacity Of Cards 300 to 350 Cards Depends on Thickness Pressure Of Hot Stamping 0-1500kg Adjustable Hologram Core I.D. 1"(25.4mm) and 3"(76mm) Maximum Hologram Width 80mm Hologram Feeding PLC Controlled With /without Sensor Mark Registration/Touch Screen to adjust foil pull size. Hologram Type Metalized Polyester Hot Stamping Hologram / Continuous Design/Scratch foil. Air Pressure 5 To 7 Bar Heating Temperature 200°c Temperature Control s1.0°c (PLC Controlled) Precision Of Card Position s0.2mm Precision Of Film Position s0.1mm Production (Card Number) 6000 Cards/hr. Machine Running Hr/time Machine is Good To Run Up To 24 Hour Non Stop. Machine Working Environment Temp 20°c To 30°c Humidity -25% To 85% Power Supply AC380v 50/60Hz 3-phase 5 wire Control Type Touch Screen viz control panel Heating speed foil Registration pulling feeding etc. Power 3.0Icw Weight Approx. 700 Kg Dimension L1300xW600xH1450mm
Features: *Connect to a computer to real-time monitor six items the printing and sealing performances: test date, temperature, pressure, speed, operator and machine number; *Built-in automatic timing, calendar, and safety thermostat; temperature and date can be set and adjusted; external one-million-digit sealing counter (optional); *print out six items,Steri.Date,Exp.Date,Bag name,Autoclave No.,Cycle No. and Operater No *can be printed in English,Chinese or symbols which the input text can be printed in English or/and Arabic numbers. *real-time monitor six items the printing and sealing performances: test date, temperature, pressure, speed, operator and machine number. *sealed width: 12mm sealed speed: 10m/min *voltage: 220V,50Hz or110V,400W dimension 535*270*170mm weight 17.0 kg
KRD80 series mechanical vibration test system is used for various products to do vertical and horizontal vibration tests, which meet the requirements of relevant test indicators. The test system has a simple structure, reliable work and easy operation. This mechanical vibration test system is suitable for vibration test of electronic components, components, electromechanical products, and instruments. According to the test requirements, carry out the corresponding product process test and fatigue test. Functions and features: 1. Stepless adjust the amplitude. 2. No forced guidance, no special foundation required. 3. Stepless adjustment of vibration frequency, fixed frequency and automatic frequency sweep. 4. Variable frequency speed regulation, computer-controlled measurement, human-machine dialogue, and complete functions.
High impact shock test system meets MIL-S-901D standard which covers shock testing requirements for ship board machinery, equipment, systems, and structures, excluding submarine pressure hull penetrations. The purpose of these requirements is to verify the ability of shipboard installations to withstand shock loadings which may be incurred during wartime service due to the effects of nuclear or conventional weapons. CME provides lightweight & medium weight high impact shock test system in accordance with one of the following test categories, as specified. Lightweight. The lightweight test is a test performed on the lightweight shock machine. Weight of the test item including fixture to attach it to the test machine shall be less than 550 pounds. Medium weight. The medium weight test is a test performed on the medium weight shock machine. Weight of the test item including fixture to attach it to the test machine shall be less than 7,400 pounds. Technical Specifications Model KRD16-1 KRD16-2 Lightweight Medium weight Max Load (kg) 200 3000 Including tooling 3400 Pendulum Mass(kg) 181 1342 Shock Form Preset energy automatic completion Drop Hammer Height (mm) 0-1500 0-1870 Work Table Size (mm) 4A (Flat plate) 860 570 1520 1520 4C-� (Angle plate) 670 300 4C- (Angle plate) 67030 0 4C- (Angle plate) 670 550 Overall Dimension (mm) 4800 1400 4400 3650 3300 3200 Weight(kg) 3500 15000 Power AC380V±10 50Hz 3kW AC380V±10 50Hz 20kW Working Environment Temperature range: 0 40, humidity 80% (no condense) Standards MIL-S-901D
KRD101 Series Packaging Compression Tester is designed to evaluate the compressive strength of packaging in order to prevent the product from deforming or being damaged during handling, stacking, storage, and transportation due to insufficient packaging strength. This machine is one of the main testing equipment for corrugated packaging performance and comprehensive indicators, and is an ideal testing equipment for papermaking, packaging, commodity inspection, scientific research and other departments. 1.Conform to standards ISO2872 & ISO2874 2.Based on the stable Windows OS and support automatic remote-control interface, the operator can accurately complete the tilting and swing test by entering simple values. 3.The operation interface is mainly based on the real-time display of data curve, it also can display the test parameters, system status, and test progress. 4.High-precision AD conversion, preamplifier, data processing and automatic test result output, digital control to ensure test accuracy and stable performance. 5.The strength test, fixed value test and stacking test can be realized on the same platform. Technical Specifications: Measuring range: 0 ~ 100kN (can also be customized according to requirements). Accuracy: 2%. Platen area: 1200*1200mm2 (extension plate can be added). Working stroke: 0 ~1500mm (can also be customized according to requirements). Pressing speed: 10mm / min (can also be set arbitrarily). Return speed: 0 ~120mm / min (can also be set arbitrarily). Foundation requirements: smooth cement floor. Working environment: 0 ~ 40, humidity less than 80% (non-condensing). Power: three-phase AC 380V 50Hz;
The KRD20 series pneumatic bump test machine replaces the traditional mechanical cam-type crash bench and is suitable for repeated impacts on electronic components, equipment and other electrical and electronic products during transportation or working. 1. Fully pneumatic driven, clean and environmentally friendly, good repeatability and high reliability. 2. Control the frequency of collisions by adjusting the gas pressure to achieve continuous high-frequency collisions. 3. Test time and collision frequency can be set arbitrarily, and it will stop automatically after the test is completed 4. The controller has door protection, over speed protection and zero signal protection to ensure the safety of the system. 5. The drop height is adjustable, only need input the overload value; adaptive adjustment of the collision process to ensure the repeatability. Technical Specifications Model KRD20-50 KRD20-100 KRD20-200 KRD20-500 KRD20-800 KRD20-1000 KRD20-1500 KRD20-2000 KRD20-3000 Load (kg) 50 100 200 500 800 1000 1500 2000 3000 Table Size (mm) 500*500 600*600 800*800 1000*1000 1500*1500 1800*1800 2000*2000 2500*2000 2500*2500 Shock Waveform half sine wave Peak Acceleration(g) 3-150 3-120 3-100 3-80 4-60 5-50 5-50 5-40 5-30 Pulse Duration(ms) 2-30 3-30 5-30 6~30 6~30 8~30 11~30 Bump Rate (Times/Min) 1~120 1~120 1~100 1~100 1-80 1~60 1-30 1-20 Overall Dimension (mm) 1050*1050*1300 1050*1050*1300 1100*1100*1300 1200*1200*1500 1300*1300*1600 1350*1350*1600 2000*2000*1850 2500*2000*1950 2500*2500*2100 Weight (kg) 1500 1500 2000 2500 2500 7500 8500 9500 11000 Power Supply AC220V �± 10% 50Hz Air Source 0.8Mpa Working Environment Temperature range 0 ~ 40; Humidity 80% non-condense Standards MIL-STD-810F IEC68-2-29
KRD70 series hydraulic vibration shaker converts the energy of high-pressure liquid into the power of the reciprocating motion of the cylinder through the electro-hydraulic servo valve. Especially suitable for vibration tests requiring low frequency and high force. It can realize sine, random, multi-point excitation and shock test (sine, random, sine on random, random on random, or resonant search & dwell). It is applied for reproducing the vibrations of transportation vehicles, bulk packaging products, machinery, electrical and electronic products in the actual environment, thereby optimizing the product structure and saving costs. 1.To achieve sine vibration, random vibration, multi-point excitation, and shock and bump; 2.It can be used to simulate seismic excitation and ammunition loading with low frequency and high force features. 3.The high-strength cast aluminum or cast magnesium table ensures uniform and consistent vibration, high reproducibility, and avoids deformation of the table. Technical Specifications Model KRD70ï¼?5K KRD70ï¼?1T KRD70ï¼?2T KRD70ï¼?3T KRD70ï¼?4T KRD70ï¼?5T KRD70ï¼?10T KRD70ï¼?20T KRD70ï¼?30T KRD70ï¼?40T KRD70ï¼?50T Force (KN) 5 10 20 30 40 50 100 200 300 400 500 Vibration Direction Vertical/Horizontal Vibration Mode Sine, random, road spectrum simulation Frequency Range (Hz) Sine 0.1ï½?200 0.1ï½?150 0.1ï½?130 0.1ï½?100 0.1ï½?80 Random 0ï½?300 0ï½?200 0ï½?150 Max. Load (kg) 100 200 400 600 800 1000 1500 3500 5000 7000 8000 Table Size (mm) 600�?600 800�?800 1000�?1000 1200�?1200 1500�?1500 1800�?1800 2000�?2000 2500�?2500 3000�?3000 Max. Displacement(P-P) (mm) 100 Max. Velocity (m/s) 0.6 Weight(kg) 2500 3000 3800 5000 6800 9500 9500 16,000 21,000 26,000 31,000 Working Environment Temperature range 0 ~ 40â??, Humidityâ?¤80% (non-condensing) Power Supply 3-phase AC 380V�±10% 50Hz Installation Condition Special foundation, optional free foundation Standards ISTA1~7 MIL-STD-810 IEC 60068-2 ASTM D4728
KRD100 series incline impact tester simulates the ability of product packaging to resist shock damage in the actual environment, such as handling, stacking of shelves, sliding of motors, loading and unloading of locomotives, product transportation, etc. This machine can also be used as a common test equipment for scientific research institutions, colleges and universities, packaging technology test centers, packaging materials manufacturing plants, and foreign trade, transportation and other departments to conduct incline impact test. 1. Flexible low-damping tackle, high repetition accuracy, to achieve the required speed change value. 2. High-strength and low-friction profile guide rails are beneficial to the accurate free sliding of the block. 3. For heavy-duty test products, the horizontal rotation mechanism of the composite pulley table can be added to facilitate the user to install the test pieces. 4. Hard wooden or iron sliding table, effectively protect the surface of the test piece. 5. Complete control and measurement system, simple and convenient operation, integrated control and measurement. 6. Unique lifting and release methods, with obvious advancement and reliability. 7. During installation, the customer only needs to fix the machine on the ground, without other complicated operations or installation. Technical Specifications Model KRD100ï¼?100 KRD100ï¼?200 KRD100ï¼?300 KRD100ï¼?500 KRD100ï¼?1000 KRD100ï¼?2000 KRD100ï¼?3000 Max Load (kg) 100 200 300 500 1000 2000 3000 Working Table Size (mm) 1100�?1100 1300�?1300 1800�?1800 2000�?2000 2200�?2200 Shock Panel Size (mm) 1600�?2000 2100�?2000 2000�?2200 2400�?2400 2600�?2600 Shock Velocity Range (m/s) 1.2ï½?3.87 0.59ï½?2.35 Incline Angle 10�°�±1�° Shock Velocity Error â?¤�±5% Power Supply 3-phase AC380V�±10% 50Hz Working Environment Temperature range 0 ~ 40â??, Humidityâ?¤80% (non-condensing) Installation Condition Special foundation or embedded chemical anchor bolts or expansion bolts on the leveled concrete floor Standards ISO 2248 ISTA
KRD40 series drop tester, mainly simulates the resistance to drop and impact of large and heavy packaging products. Its strong power system and unique sample holder facilitate easy loading and unloading of oversized and overweight items and automatically rise to the setting. After the height, the drop test is completed. It can realize the drop test of the edge, surface and angle of the sample. This equipment is mainly used to evaluate the ability of product or packaging to withstand drops during transportation and loading and unloading, so as to improve product and packaging design. 1. Driven by pneumatic and servo motors, stable lifting process with upper and lower displacement restrictions, safe and reliable; 2. Adopt single-track or dual-track lifting method, and the height can be adjusted arbitrarily; 3. It can clamp and drop the test specimen in different directions such as edges, faces and angles; 4. The testing machine adopts PLC full-automatic control, large size true color touch LCD screen, 5. No special foundation required, no other complicated operation or installation; 6. Remote control can be realized to ensure the safety of operators (customized functions). Technical Specifications Parameters KRD40-100 KRD40-200 KRD40-300 Max. Load (kg) 100 200 300 Drop Height (mm) 0ï½?1500 Max. Specimen Size (mm) 1000�?1000�?1000 1200�?1200�?1200 1300�?1300�?1300 Position Accuracy �±2% or �±10mm (subject to the larger value) Drop Zone Sizeï¼?W*D/mmï¼? 1200�?1200 1400�?1400 1500�?1500 Test Mode Face, Edge and Angle Power 1-phase AC 220V�±10% 50Hz 3-phase AC 380V �±10% 50Hz Working Environment Temperature range 0ï½?40â??, Humidityâ?¤80% (non-condensing) Installation Condition Foundation-free, the cement floor shall be leveled and the working distance of 800~1000mm shall be reserved around the equipment Standards ISO2248-1985(E) IEC68-2-27 ISTA
Bounce testing simulates the constant loose cargo state during truck transport. Often times, containers carrying military and civilian hardware (such as: medical supplies, electronics, weaponry, communication devices) travel for extended periods of time and must be transported off-road. All of these items must maintain functionality upon arrival at their destinations. The International Safe Transit Association (ISTA) developed a civilian package test procedure resembling the military test: 1A for products weighing less than 150 lb (68 kg) and 1B for over 150 lb (68 kg). Additional tests in subsequent procedures such as 1C, 1D, 2A and further combine the loose cargo basic test with atmospheric conditioning and other factors. MIL-STD-810 and ISTA Procedures 1A and 1B offer package test procedures for packages subjected to repeated vibration (bouncing Testing) for a distance of up to 150 miles (240 km), while unrestrained and repeatedly colliding with other cargo and the walls and floor of a four-sided compartment. Technical Specifications Model KRD51 100 KRD51 200 KRD51 500 KRD51 1000 KRD51 2000 Max. Load (kg) 100 200 500 1000 2000 Displacement (mm) 25.4 Frequency 2~5Hz (120~300RPM) Test Motions Circular Motion Working Table Size (mm) 1700�?1200 1900�?1300 2000�?1500 2700�?1650 2700�?1800 Height of Specimen COG (mm) ï¼?500 ï¼?600 ï¼?700 Consumption Power (kVA) 8 10 12 15 20 Dimension (mm) 2100 1500 1200 2170 1570 1400 2300 1800 1800 2700 1800 1800 3120 2100 1850 Weight (kg) 1600 2800 3500 5000 8500 Power Supply 3-phase AC380V -810G FED-101
KRD13 series high acceleration shock test system is specially designed to meet the requirements of military industry and home appliances. The system adopts the principle of pneumatic energy storage expansion. By adjusting the inflation pressure, various high-level acceleration tests can be easily implemented in a short stroke. For the classic drop test, it is equipped with the corresponding shock amplifier to complete drop test. 1. Windows-based stable control system, full-automatic remote-control interface 2. Pneumatic cylinder driving with advantages of large driving force, short accelerating stroke, low cost and pollution free. 3. Automatic control of lifting height with high accuracy and good repeatability 4. Adopts the high strength and hardness cast aluminum table, which has high first-order resonance frequency, featured with low noise and no clutter 5. The most reliable double-brake system: effectively avoids secondary rebound collisions, more securely positioning the table, and more reliably guarantees the safety of the operator. 6. Easy installation: the device comes with a base, due to short driving stroke of the pneumatic cylinder, the footprint is small. Technical Specifications Model KRD13ï¼?50 KRD13ï¼?100 KRD13ï¼?200 KRD13ï¼?500 KRD13ï¼?800 KRD13ï¼?1000 KRD13-2000 Rated Load (kg) 50 100 200 500 800 1000 2000 Table Size (mm) 500 500 600 600 800 800 1000 1000 1200 1200 1500 1500 2000 2000 Peak Acc. (g) Half-Sine 10~1500 10~1000 10-1000 10-500 10-400 10-300 10-200 Post-Peak Sawtooth 10~200 10~100 10-50 Trapezoid 15-200 15-100 15-100 15-60 15-50 30-50 Pulse Duration (ms) Half-Sine 2 60 3 60 3 60 4 60 5 60 6 60 8 60 Post-Peak Sawtooth 3 18 6 18 Trapezoid 3 18 6 18 Bump Waveform (Optional) Half Sine Waveform Bump Peak Acceleration (g) 5 100 5 80 5 60 5 40 / Bump Pulse Duration(ms) 3 30 3 30 4 30 5 30 / Bump Rate (Times/Min) 10~80 10~60 10-40 / Overall Dimension (mm) 1200 1200 1500 1200 1200 1650 1100 1100 1700 1300 1300 1600 1500 1500 1700 1600 1600 1800 2000 2000 1900 Weight (kg) 3000 3800 3200 4000 5000 6000 8000 Environment Temperature range 0 40 , Humidity 80% (non-condensing) Power 1-phase AC220V±10% 50Hz Air source 1MPa Installation Condition Foundation-free, the cement floor shall be leveled and the working distance of 800 ~ 1000mm shall be reserved around the equipment Standards IEC68-2-27 MIL-STD-202 MIL-STD-750 MIL-STD-810 MIL-STD-883 UN38.3 IEC62281 IEC62133-2 UL2054 IEEE1625 SAEJ2929 IEC62660-2 ISO12405-3 UL2580
KRD30 series centrifugal constant acceleration test machine is used to evaluate when components, equipment and other electrical and electronic products are subjected to constant acceleration environment (except gravity), whether the structure adaptability and performance are good, and obtain the units electrical parameters. 1.Advanced control system: Full-automatic computer remote real-time control interface. The operator only needs to input simple values to start the equipment and complete the acceleration test accurately. 2.User-friendly display interface: the control interface can display the test curve, tolerance and test time in real time. 3.Powerful multi-acceleration continuous test system: It can realize multi-level acceleration continuous test according to the different requirements of the test sample. 4.Reliable protection measures: open circuit, over-limit and over-speed protection can be realized. 5.Multiple control methods: In the case of automatic control failure or no need of automatic control, the device can still use manual control to complete the test. 6.Convenient and quick result output system: After the test, the test report is automatically generated and printed out. Technical Specifications Model KRD30-3 KRD30-5 KRD30-10 KRD30-20 KRD30-2M KRD30-3M KRD30-4M KRD30-8M Max. Load (kg)/Position 3*6 5*4 10*2 20*2 0.05*N 0.04*N 0.03*N 0.02*N Acceleration (g) 3-500 3-100 200-20k 200-30k 200-40k 200-80k Max. Height for Specimen (mm) 200 300 / Installation Radius (mm) 200 500 130 Test Direction Launch/Stop Time (Min) 3 5 Continues Worktime (Min) 60 5 Acceleration Accuracy (%) 3 Overall Dimension (mm) 1100*1100*1200 1650*1350*1100 1000*1000*1200 Collector Ring Optional according to user requirements / Weight (kg) 1000 1500 1000 Power Supply AC380V �±10%, 50/60Hz Control System Fully closed-loop digital network (remote) automatic control + manual control Remarks The current collector and the control precision can be in accordance the related standards or customer requirements Working Environment Temperature Range 0-40, Humidity 80% (no condense)
Backed by the team of adroit professional and experience in this industry, our company has emerged as one of the renowned manufacturers of Industrial Sand Blasting Machine. In order to meet the ever-changing demands of the patrons, we have come forward with wide assortment of road construction machines. Our Industrial Sand Blasting machine is highly accredited by the clients due to its striking features such as strong design, less power consumption and long operational life.
Our clients choose us over companies for manufacturing Industrial Sand Processing plants. Widely installed for processing sand, this plant ensures zero impurities in the final product. Capable of performing a wide series of processing steps, this plant is fully automated with advanced techniques. Developed in different configurations, this Industrial Sand Processing plant is best suited for the construction and glass industries.
Our bollards are motorized actuators,capable of being controlled using a remote control,the bollards are made of 304 stainless steel,which is highly resistant to corrosion,and highly resistant to impact. The high brightness LED light strip provides good visibility,even during the day and is more visible at night,stable operation and durability at the same time,because of the sealing design thus the installation does not need to do the drainage system can reduce the construction cost and shorten the installation time. Electromechanical drive unit nonhydraulic drive,good low temperature resistance,no heating device required. Place of Origin:Fujian, China Brand Name:UPARK Diameter:219mm Height Above Ground:600mm Thickness:6mm/Customized Product Type:Automatic Electromechanical Bollards Material:304 Stianless Steel Drainage System:Not Required Warning:LED Light Lead Time:5 Days Warranty:1 Year
Applied on the heat setting stenter, getting the fabric edge well prepared to be pinned on the right place
Highly effective and performing equipment. Get a higher productivity, reducing stoppages and quality defects. High suctioning and blowing capacity, allowing to keep the spinning and weaving machines in optimum cleaning conditions. Minimum maintenance. Great improvement of environmental conditions. Several models with particularly studied executions for each case, making possible a perfect adaptation to the cleaning needs of the different spinning and weaving machine types.
MD860 Enamel Baked Shell Continuous Sealer With Printer Features: It can print 6 items, sterilization date, expiry date, bag name, autoclave number, cycle number and personal number. The temperature and date are available to set and adjust. Three fonts and three intervals of wording can be selected with one line print-out. Six items can be printed with minimum line length 65mm. Printing function can be paused while only sealing function remains. Sealing width: 12mm. Sealing speed: 10m/munite. Working temperature: 30-230. Difference of temperature. Internal timer, internal calendar and safety thermoprogrammer are installed. Automatic adjustment of sealing pressure fits to thickness range of the pouches. Adjustable depth of feeding. Automatically starts while feeding. Heat keeping for the next feeding can be adjusted within 120 minutes before turning to stand-by to save power. Install the cassette of ink ribbon in front of the cover. Internal matrix printer. Power: 400W, 220V or 110V,50/60Hz. Size: 610 290 240mm Weight: 22.5Kg.
MD680st. Standard type. Stainless steel upper house+baking enamel lower house+manual start 1.Stainless steel cover; 2.Four-line sealing, 12mm sealing width;Adjust sealing brim 0-30mm 3.Digital temperature control: 30-200 selectable; 4.Temperature difference: 5.Sealing speed: 10m/minute; 6.Power consumption: 400W; 7.Voltage: 220V, 50Hz (option: 110V); 8.Size: 495*252*146mm;Packing: 660*370*285mm 9.Net weight: 12.7 kg; Gross weight: 14.5 kg We Accept DHL,UPS,Fedex, International Shipping AirLine,Ocean Shipping etc.
