Find Verified Paper Machinery Suppliers, Manufacturers and Wholesalers

The New Mil-tek Xp100s Long Cylinder Waste Compactor is a Small, Stainless Steel Waste Press Ideal for Compact, Clean Locations Such as Kitchens. The Long Cylinder Increases the Level of Compaction Within a Small Footprint Area.
Long Cylinder
Fits 240 Litre Bins
Stainless Steel Frame
Small Footprint (52 Cm2)
Densely Compacted Waste
Reduced Energy Consumption
Suitable for Kitchens & Food Preparation Areas

Product Overview
The Mil-tek X-press 100 Long Cylinder Waste Compactor is a Small Size Waste Compactor Suitable for a Variety of Locations Including Kitchens, Small Cafes, Food Preparation Sites, Hospitals, Offices, and General Waste Areas.the Stainless Steel Waste Press is Small Enough to Be Installed Indoors and in Clean, Working Environments. It is Free From Oil or Other Contaminants. With a Footprint of Less Than 52cmâ², the Xp100s Waste Press Can Easily Be Added to Working Environments Such as Food Preparation Areas, Creating a Seamless Waste Disposal Process and Minimizing Any Time Wasted Transporting Waste.the Long Cylinder of the Xp100s Waste Press Compacts Waste More Densely With Each Cycle, Creating Densely Compacted Bags of Waste Up to 50 Kg in Weight. The Long Cylinder Also Uses Less Power With Each Stroke, and Can Run on as Little as 2 Bars of Pressure. Compacted Waste From an Xp100s Can Easily Be Transported Using a Mil-tek Lift Trolley. Using a Lift Trolley, Waste Bags Are Slid From the Wagon to the Lifting Plate, Winched Up and Pushed Into Waste Bins, Eliminating the Need for Heavily Lifting.
Machine Size
Height (Mm) : 1970
Width (Mm) : 670
Depth (Mm) :704
Weight : 120 Kg
Bag Height (Mm) : 600 Mm
Bag Diameter (Mm) : 450 Mm
Weight of Full Bag : <50 Kg
Material : General / Kitchen Waste
Degree of Compression : < 90%
Noise Level : < 70 Db(a)
Pressure : 1500 Kg at 5 Bar
Approvals : Ce, as/nz 4024.1

Set Price : 4680.00 Eur
In Set Included:
Xp100s Compactor
1 Box Bags 100l (100 Pcs./box)
1000 Pcs.wire Ties
Wire Tie Twister/strapper

Optional : Ompressor Mt1 B Hd :925.00 Eur
Extra Bags, 100l, 5 Boxes (500 Pcs. ) : 245.00 Eur

Ideal for small spaces and indoor environments, the X-Press 200S compactor is tough, durable and can handle all forms of general black bag waste including food, fluids and hazardous waste, compacting by a ratio of up to 10:1.
Stainless steel
10:1 compaction
Improves security and safety
Low on noise, low on energy

Air-powered, clean and hygienic
Suitable for kitchens & offshore environments

Product Overview
The Mil-tek X-Press 200S stainless steel waste compactor is extremely flexible and suitable for a wide variety of locations including kitchens, food preparation sites, hospitals, offices, and general waste areas.By compacting your general, food and hazardous waste in an X-Press 200S waste compactor, you optimize your waste area, creating more space, less mess, better hygiene and solve the problem of overflowing bins. You also reduce the number of bins and collections by 80%, reducing the cost and improving the internal logistics and productivity of your organisation.A compaction ratio of up to 10:1 has a significant impact on waste costs by reducing number of waste containers and frequency of hauls.The Mil-tek X-Press 200S is powered by compressed air, either directly from an existing air-line or from a compressor supplied by Mil-tek. This means that the Mil-tek X-Press 200S is free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination.

Machine size
Height (mm) : 2025
Width (mm) : 810
Depth (mm) : 779
Weight : 150 kg
Bag height (mm) : 600
Bag diameter (mm) : 570
Weight of full bag : <60 kg
Material : General / Kitchen Waste
Degree of Compression ; < 90%
Noise level : < 70 dB(A)
Pressure : 1500 kg at 5 bar
Approvals : CE, AS/NZ 4024.1

SET PRICE : 4800.00 EUR
In set included:
XP100S COMPACTOR
1 BOX BAGS 200L (100 PCS./BOX)
1000 PCS.WIRE TIES
WIRE TIE TWISTER/STRAPPER

OPTIONAL:
COMPRESSOR MT1 B HD : 925.00 EUR
EXTRA BAGS, 200L, 5 BOXES (500 PCS.) : 312.00 EUR

Ideal for small, indoor environments, Mil-tek X-Press compactors are tough, durable and can handle all forms of general black bag waste including food, fluids and hazardous waste, compacting by a ratio of up to 10:1.
10:1 compaction
Improves security and safety
Low on noise, low on energy
Air-powered, clean and hygienic
Compact general and hazardous waste
Suitable for kitchens & offshore environments

Product Overview
The Mil-tek X-Press 200 waste compactor is extremely flexible and suitable for a wide variety of locations including kitchens, food preparation sites, hospitals, offices, and general waste areas.By compacting your general, food and hazardous waste in an X-Press 200 waste compactor, you optimize your waste area, creating more space, less mess, better hygiene and solve the problem of overflowing bins. You also reduce the number of bins and collections by 80%, reducing the cost and improving the internal logistics and productivity of your organisation.A compaction ratio of up to 10:1 has a significant impact on waste costs by reducing number of waste containers and frequency of hauls.The Mil-tek X-Press 200 compactor is powered by compressed air, either directly from an existing air-line or from a compressor supplied by Mil-tek. This means that the Mil-tek X-Press 200 is free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination.
Machine size
Height (mm) : 1825
Width (mm) : 830
Depth (mm) : 800
Weight : 135 kg
Bag height (mm) : 600
Bag diameter (mm) : 570
Weight of full bag : <60 kg
Material : General / Kitchen Waste
Degree of Compression : < 90%
Noise level : < 70 dB(A)
Pressure : 1500 kg at 5 bar
Approvals : CE, AS/NZ 4024.

SET PRICE : 4800.00 EUR
In set included:
XP100S COMPACTOR
1 BOX BAGS 200L (100 PCS./BOX)
1000 PCS.WIRE TIES
WIRE TIE TWISTER/STRAPPER

OPTIONAL:
COMPRESSOR MT1 B HD : 925.00 EUR
EXTRA BAGS, 200L, 5 BOXES (500 PCS.) : 312.00 EUR

Ideal for small, indoor environments, Mil-tek X-Press compactors are tough, durable and can handle all forms of general black bag waste including food, fluids and hazardous waste, compacting by a ratio of up to 10:1.
10:1 compaction
Improves security and safety
Low on noise, low on energy
Air-powered, clean and hygienic
Fixed frame unit & sliding wagon
Suitable for kitchens & offshore environments
Compact general, kitchen and hazardous waste
Product Overview
The Mil-tek X-Press 300 waste compactor is extremely flexible and suitable for a wide variety of locations including kitchens, food preparation sites, hospitals, offices, and general waste areas.By compacting your general, food and hazardous waste in an X-Press 300 waste compactor, you optimize your waste area, creating more space, less mess, better hygiene and solve the problem of overflowing bins. The fixed frame unit and sliding wagon allows the X-Press 300 to be securely bolted in place making it ideal for shipping, offshore environments or uneven surfaces.The Mil-tek X-Press 300 compactor is powered by compressed air, either directly from an existing air-line or from a compressor supplied by Mil-tek. This means that the Mil-tek X-Press 300 is free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination.

Machine size
Height (mm) : 1850
Width (mm) : 670
Depth (mm) : 1155
Weight : 107 kg
Bag height (mm) : 600
Bag diameter (mm) : 450
Weight of full bag : <50 kg
Material : General / Kitchen Waste
Degree of Compression : < 90%
Noise level : < 70 dB(A)
Pressure : 1500 kg at 5 bar
Approvals : CE

Set Price : 4990.00 Eur
In Set Included:
Xp100s Compactor
1 Box Bags 100l (100 Pcs./box)
1000 Pcs.wire Ties
Wire Tie Twister/strapper

OPTIONAL :
COMPRESSOR MT1 B HD : 925.00 EUR
EXTRA BAGS, 100L, 5 BOXES (500 PCS.) : 245.00 EUR

The E319 Cardboard & Plastic Electric Baler is a low height, heavy duty electric baler that is ideal for businesses with a steady stream of cardboard and plastic waste and packaging.
High compaction pressure
Electric: almost silent running 57 dB (A)
Electric: no hydraulic oil
Plug'n'Press: modern control system
Constant Pressure: Locks pressing plate in place
Safe and easy built-in bale ejection
Product Overview
The Electric E319 is a quiet-running electro-mechanical baler. Featuring a spindle-driven pressing plate, the E319 quietly compresses material with up to 15 tonnes of pressing force.Suitable for cardboard, plastic and other recyclable material, the E319 has a modern control system to start the machine and activate the pressing cycle. The pressing plate has a constant pressure feature, which locks the pressing plate in place to further compact material, without any additional electrical use. The E319 electric baler features a magnetic safety switch and inductive sensors, additionally, customized functions can easily be switched on/off. This unique construction allows for the smaller height, while still featuring a large feed opening and heavy bale weight.As it is powered by electricity, without using hydraulics, the E319 baler is suitable for locations that do not already have a source of compressed air. The lack of hydraulics mean that the E319 operates quietly, without interfering with the natural workflow, and can be located in hygiene sensitive areas. At just 1.85 metres high, the E319 electric baler has a low working height and can be installed in most locations with relative ease.

Machine size
Height (mm) : 1855
Width (mm) : 1165
Depth (mm) : 770
Weight ; 500 kg
Bale size : Height (mm) : 800
Width (mm) : 500
Depth (mm) : 900
Bale weight : Plastic: <100 kg

Cardboard: <80 kg
Door Opening
Height (mm) : 505
Width (mm) : 890
Depth (mm) : 500
Degree of Compression : 85-90%
Noise level : <60 dB (A)
Pressure : 15 tons
Approvals : CE, EN16500

Set Price : 7666.00 Eur
In Set Included : E319 Bale Press
30 Rolls Banding, 13mm-25

The E619 Electric Baler is a low height, heavy duty electric baler that is ideal for businesses with a large volume of waste cardboard and plastic packaging material.
High compaction pressure
Low: Total machine height just over 2m
Electric: quiet & free from hydraulics
Constant Pressure: Locks pressing plate in place
Easy-open: User-friendly door for simple loading

Product Overview
The Electric E619 is a high capacity electro-mechanical baler that is ideal for large volumes of waste cardboard and plastic packaging.It has a large door opening that facilitates large boxes or bags of plastic packaging, and the spindle-driven pressing plate compacts material with up to 25 tons of pressing force. Eight hooks are built into the walls of the chamber to hold compacted material in place.With a total height of just 2.07m, the E619 can be installed in most locations and, operating at approximately 65 decibels, operates relatively quietly without interrupting the working environment.The control system for the E619 electric baler is a simple and modern design. In addition, the normal pressing cycle, it can also be set to 'auto-start' or to 'constant pressure', which locks the pressing plate in place to further compact material, without additional electrical use.In accordance with EN16500 safety standards, the E619 features a magnetic safety switch, inductive sensors and additional safety elements to ensure user safety.

Machine size
Height (mm) : 2070
Width (mm) : 1915
Depth (mm) : 960
Weight : 1212 kg
Bale size
Height (mm) : 800
Width (mm) : 1500
Depth (mm) : 800
Bale weight : Plastic: <400 kg

Cardboard: <300 kg
Door Opening
Height (mm) : 540
Width (mm) : 1450
Depth (mm) : 800
Amp. : 32 Amp
Degree of Compression : 85-90%
Noise level : <65 dB(A)
Pressure : 25 tons
Approvals : CE, EN16500

Set Price : 13850.00 Eur
In Set Included:
E619 Bale Press
40 Rolls Banding, 16mm-200m/roll

High quality Pine wood chips, specifications are variable as per request.
Price varies per quantity and specifications.

Product Name :
Milling, turning, laser cutting, engraving, wood forming, plywood forming

Product Description
Our focus is on wooden components, not bigger than 500x500x500 mm We have assembling service available - manual or automatic assembly of our components with Your components. Spare parts kits, other manual operations.

Price of product ( USD price or FOB price) :
Each customer and product has its own price.
Because each order is individual.
We provide all the highest quality and delivery of products.

Product origin :
Spare parts kits, other manual operations.

Key Specifications/Special Features :
Manufacturing of wooden components
Milling, turning, laser cutting, engraving, wood forming, plywood forming. Each customer and product has its own price.
Because each order is individual.
We provide all the highest quality and delivery of products.
Key Specifications / Special Features
Engineering network, drawing, design, production, delivery

Minimum Order Size and Packgaing details :
You can order one product or a full container. Package:
Wooden box.
Cardboard box
Special plastic packaging.
Vacuum packaging

Wood chips for thermo power plant. Used as fuel to burn.
Specifications varies as per request.