Find Verified Aluminum Plate Suppliers, Manufacturers and Wholesalers

The E319 Cardboard & Plastic Electric Baler is a low height, heavy duty electric baler that is ideal for businesses with a steady stream of cardboard and plastic waste and packaging.
High compaction pressure
Electric: almost silent running 57 dB (A)
Electric: no hydraulic oil
Plug'n'Press: modern control system
Constant Pressure: Locks pressing plate in place
Safe and easy built-in bale ejection
Product Overview
The Electric E319 is a quiet-running electro-mechanical baler. Featuring a spindle-driven pressing plate, the E319 quietly compresses material with up to 15 tonnes of pressing force.Suitable for cardboard, plastic and other recyclable material, the E319 has a modern control system to start the machine and activate the pressing cycle. The pressing plate has a constant pressure feature, which locks the pressing plate in place to further compact material, without any additional electrical use. The E319 electric baler features a magnetic safety switch and inductive sensors, additionally, customized functions can easily be switched on/off. This unique construction allows for the smaller height, while still featuring a large feed opening and heavy bale weight.As it is powered by electricity, without using hydraulics, the E319 baler is suitable for locations that do not already have a source of compressed air. The lack of hydraulics mean that the E319 operates quietly, without interfering with the natural workflow, and can be located in hygiene sensitive areas. At just 1.85 metres high, the E319 electric baler has a low working height and can be installed in most locations with relative ease.

Machine size
Height (mm) : 1855
Width (mm) : 1165
Depth (mm) : 770
Weight ; 500 kg
Bale size : Height (mm) : 800
Width (mm) : 500
Depth (mm) : 900
Bale weight : Plastic: <100 kg

Cardboard: <80 kg
Door Opening
Height (mm) : 505
Width (mm) : 890
Depth (mm) : 500
Degree of Compression : 85-90%
Noise level : <60 dB (A)
Pressure : 15 tons
Approvals : CE, EN16500

Set Price : 7666.00 Eur
In Set Included : E319 Bale Press
30 Rolls Banding, 13mm-25

Minimize your waste of time, space and money Carries up to 150kg Eliminates all heavy lifting Stainless steel lifting plate Made of a powder-coated steel frame Multi-directional wheel base Easy transportation of compacted waste The Mil-tek Lift Trolley is the ideal assistant for a Mil-tek X-Press Compactor, eliminating any heavy lifting and making transportation of the finished waste bag both safe and easy. Instead of carrying bags to and from a skip/bin, compacted bags are simply wheeled out, winched up and pushed off. The lifting plate is manufactured from stainless steel, in order to avoid corrosion and minimize wear when used in hostile and onerous environments. The Lift Trolley is suitable for use with all XP model compactors and can also be used to transport small/medium sized bales of plastic and cardboard.
Specifications
Height (mm) : 1743
Width (mm) : 581
Depth (mm) : 778
Max. Lifting Height (mm) : 1400
Net. Weight (kg) : 50
Max. Lifting Weight (kg) : 150
Approved : CE

PRICE : 845.00 E

The E619 Electric Baler is a low height, heavy duty electric baler that is ideal for businesses with a large volume of waste cardboard and plastic packaging material.
High compaction pressure
Low: Total machine height just over 2m
Electric: quiet & free from hydraulics
Constant Pressure: Locks pressing plate in place
Easy-open: User-friendly door for simple loading

Product Overview
The Electric E619 is a high capacity electro-mechanical baler that is ideal for large volumes of waste cardboard and plastic packaging.It has a large door opening that facilitates large boxes or bags of plastic packaging, and the spindle-driven pressing plate compacts material with up to 25 tons of pressing force. Eight hooks are built into the walls of the chamber to hold compacted material in place.With a total height of just 2.07m, the E619 can be installed in most locations and, operating at approximately 65 decibels, operates relatively quietly without interrupting the working environment.The control system for the E619 electric baler is a simple and modern design. In addition, the normal pressing cycle, it can also be set to 'auto-start' or to 'constant pressure', which locks the pressing plate in place to further compact material, without additional electrical use.In accordance with EN16500 safety standards, the E619 features a magnetic safety switch, inductive sensors and additional safety elements to ensure user safety.

Machine size
Height (mm) : 2070
Width (mm) : 1915
Depth (mm) : 960
Weight : 1212 kg
Bale size
Height (mm) : 800
Width (mm) : 1500
Depth (mm) : 800
Bale weight : Plastic: <400 kg

Cardboard: <300 kg
Door Opening
Height (mm) : 540
Width (mm) : 1450
Depth (mm) : 800
Amp. : 32 Amp
Degree of Compression : 85-90%
Noise level : <65 dB(A)
Pressure : 25 tons
Approvals : CE, EN16500

Set Price : 13850.00 Eur
In Set Included:
E619 Bale Press
40 Rolls Banding, 16mm-200m/roll

The New Mil-tek Xp100s Long Cylinder Waste Compactor is a Small, Stainless Steel Waste Press Ideal for Compact, Clean Locations Such as Kitchens. The Long Cylinder Increases the Level of Compaction Within a Small Footprint Area.
Long Cylinder
Fits 240 Litre Bins
Stainless Steel Frame
Small Footprint (52 Cm2)
Densely Compacted Waste
Reduced Energy Consumption
Suitable for Kitchens & Food Preparation Areas

Product Overview
The Mil-tek X-press 100 Long Cylinder Waste Compactor is a Small Size Waste Compactor Suitable for a Variety of Locations Including Kitchens, Small Cafes, Food Preparation Sites, Hospitals, Offices, and General Waste Areas.the Stainless Steel Waste Press is Small Enough to Be Installed Indoors and in Clean, Working Environments. It is Free From Oil or Other Contaminants. With a Footprint of Less Than 52cmâ², the Xp100s Waste Press Can Easily Be Added to Working Environments Such as Food Preparation Areas, Creating a Seamless Waste Disposal Process and Minimizing Any Time Wasted Transporting Waste.the Long Cylinder of the Xp100s Waste Press Compacts Waste More Densely With Each Cycle, Creating Densely Compacted Bags of Waste Up to 50 Kg in Weight. The Long Cylinder Also Uses Less Power With Each Stroke, and Can Run on as Little as 2 Bars of Pressure. Compacted Waste From an Xp100s Can Easily Be Transported Using a Mil-tek Lift Trolley. Using a Lift Trolley, Waste Bags Are Slid From the Wagon to the Lifting Plate, Winched Up and Pushed Into Waste Bins, Eliminating the Need for Heavily Lifting.
Machine Size
Height (Mm) : 1970
Width (Mm) : 670
Depth (Mm) :704
Weight : 120 Kg
Bag Height (Mm) : 600 Mm
Bag Diameter (Mm) : 450 Mm
Weight of Full Bag : <50 Kg
Material : General / Kitchen Waste
Degree of Compression : < 90%
Noise Level : < 70 Db(a)
Pressure : 1500 Kg at 5 Bar
Approvals : Ce, as/nz 4024.1

Set Price : 4680.00 Eur
In Set Included:
Xp100s Compactor
1 Box Bags 100l (100 Pcs./box)
1000 Pcs.wire Ties
Wire Tie Twister/strapper

Optional : Ompressor Mt1 B Hd :925.00 Eur
Extra Bags, 100l, 5 Boxes (500 Pcs. ) : 245.00 Eur

Delivery time
The machine will be delivered within 25 working days.
Price : 517 000.00 EUR

Basic Parameters
Model S4020
Working area (mm) 4000mm*2000mm
Laser power (kW) 20
Laser source MAX
Format support Beckhoff CNC code file/ G code
Positioning accuracy (mm) 0.05
Re-positioning accuracy (mm) 0.03
Z axis travel (mm) 135
Max. Acceleration (G) 4.0
Max. Linkage speed (m/min) 200
Max. Workpiece weight (kg) 4,835
Machine size (mm) 15500*4200*2400mm
Machine weight (kg) 18,500
Total power capacity/current 68VA/103A

2
FUNCTION

Intelligent
function

Time savings
One-click processing
Bodor Lightning perforation technology
High Speed Cutting Expert Database
Automatic Edge-finding
Automatic nozzle changer
Automatic nozzle cleaning
Intelligent remainder sheets cut-apart
Touchscreen Display
Automatic adjustment of cutting gas pressure
Auto-focus of laser head

3
Laser cutting technology expert database
Ergonomic Remote Control (Bodor Mango)
Quality cutting
Active anti-collision function
intellgent over-heat adaptation
start-up melted slag clean
High quality Cutting Expert Database
Real-time monitoring of laser head temperature
Nozzle cooling
Cost savings
Constant Cutting Gas Pressure
Gas-saving steady flow nozzle
Intelligent maintenance reminder
Service
WIFI internet connection
Bodor cloud sevice

Configurations
1. 20 KW MAX laser source
2. Germany Precitec laser cutting head
3. Germany Beckhoff control system
4. Lantek Nesting software
5. Cast iron machine bed
6. Triangular type ultrahigh pressure honeycomb aluminum gantry
7. Automatic nozzle changer
8. MANGO handle
9. 21.5-inch touch screen
10. Germany Beckhoff servo motor and driver
11. Germany Rexroth slideway and gear
12. Germany STOBER reducer
13. Schneider electric relay and breaker from France
14. Switzerland ABB Frequency converter
15. Switzerland CARLO GAVAZZI Switching power/current supply
16. America Parker control valve for N2
17. Germany Phoenix Terminal
18. Active obstacle avoidance function
19. Automatic lubrication
20. WLAN control
21. Automatic pressure control function for O2 - N2air
22. Process monitoring
23. Pierce Monitor
24. Closed-loop pressure control
25. Lighteye Edge Searching
26. Unbounded Cutting
27. Vortex Start
28. CE certificate
29. Laser fault alarm
30. Cooler fault alarm
31. Laser protective glasses
32. Electron microscope
33. Water chiller