Steel rebar, plates for ship buildings, cast iron, cast and rolled slabs, steel billets, hot rolled plates and coils sheets, general purpose hot rolled plate, cold rolled plate, galvanized cold rolled sheets and coils, seamless hot rolled pipes, straight seam welded pipes, metal scraps.
The New Mil-tek Xp100s Long Cylinder Waste Compactor is a Small, Stainless Steel Waste Press Ideal for Compact, Clean Locations Such as Kitchens. The Long Cylinder Increases the Level of Compaction Within a Small Footprint Area.
Long Cylinder
Fits 240 Litre Bins
Stainless Steel Frame
Small Footprint (52 Cm2)
Densely Compacted Waste
Reduced Energy Consumption
Suitable for Kitchens & Food Preparation Areas
Product Overview
The Mil-tek X-press 100 Long Cylinder Waste Compactor is a Small Size Waste Compactor Suitable for a Variety of Locations Including Kitchens, Small Cafes, Food Preparation Sites, Hospitals, Offices, and General Waste Areas.the Stainless Steel Waste Press is Small Enough to Be Installed Indoors and in Clean, Working Environments. It is Free From Oil or Other Contaminants. With a Footprint of Less Than 52cmâ², the Xp100s Waste Press Can Easily Be Added to Working Environments Such as Food Preparation Areas, Creating a Seamless Waste Disposal Process and Minimizing Any Time Wasted Transporting Waste.the Long Cylinder of the Xp100s Waste Press Compacts Waste More Densely With Each Cycle, Creating Densely Compacted Bags of Waste Up to 50 Kg in Weight. The Long Cylinder Also Uses Less Power With Each Stroke, and Can Run on as Little as 2 Bars of Pressure. Compacted Waste From an Xp100s Can Easily Be Transported Using a Mil-tek Lift Trolley. Using a Lift Trolley, Waste Bags Are Slid From the Wagon to the Lifting Plate, Winched Up and Pushed Into Waste Bins, Eliminating the Need for Heavily Lifting.
Machine Size
Height (Mm) : 1970
Width (Mm) : 670
Depth (Mm) :704
Weight : 120 Kg
Bag Height (Mm) : 600 Mm
Bag Diameter (Mm) : 450 Mm
Weight of Full Bag : <50 Kg
Material : General / Kitchen Waste
Degree of Compression : < 90%
Noise Level : < 70 Db(a)
Pressure : 1500 Kg at 5 Bar
Approvals : Ce, as/nz 4024.1
Set Price : 4680.00 Eur
In Set Included:
Xp100s Compactor
1 Box Bags 100l (100 Pcs./box)
1000 Pcs.wire Ties
Wire Tie Twister/strapper
Optional : Ompressor Mt1 B Hd :925.00 Eur
Extra Bags, 100l, 5 Boxes (500 Pcs. ) : 245.00 Eur
Ideal for small, indoor environments, Mil-tek X-Press compactors are tough, durable and can handle all forms of general black bag waste including food, fluids and hazardous waste, compacting by a ratio of up to 10:1.
10:1 compaction
Improves security and safety
Low on noise, low on energy
Air-powered, clean and hygienic
Fixed frame unit & sliding wagon
Suitable for kitchens & offshore environments
Compact general, kitchen and hazardous waste
Product Overview
The Mil-tek X-Press 300 waste compactor is extremely flexible and suitable for a wide variety of locations including kitchens, food preparation sites, hospitals, offices, and general waste areas.By compacting your general, food and hazardous waste in an X-Press 300 waste compactor, you optimize your waste area, creating more space, less mess, better hygiene and solve the problem of overflowing bins. The fixed frame unit and sliding wagon allows the X-Press 300 to be securely bolted in place making it ideal for shipping, offshore environments or uneven surfaces.The Mil-tek X-Press 300 compactor is powered by compressed air, either directly from an existing air-line or from a compressor supplied by Mil-tek. This means that the Mil-tek X-Press 300 is free of both electrical and hydraulic components, minimizing the risk of fire and completely eliminating the risk of oil contamination.
Machine size
Height (mm) : 1850
Width (mm) : 670
Depth (mm) : 1155
Weight : 107 kg
Bag height (mm) : 600
Bag diameter (mm) : 450
Weight of full bag : <50 kg
Material : General / Kitchen Waste
Degree of Compression : < 90%
Noise level : < 70 dB(A)
Pressure : 1500 kg at 5 bar
Approvals : CE
Set Price : 4990.00 Eur
In Set Included:
Xp100s Compactor
1 Box Bags 100l (100 Pcs./box)
1000 Pcs.wire Ties
Wire Tie Twister/strapper
OPTIONAL :
COMPRESSOR MT1 B HD : 925.00 EUR
EXTRA BAGS, 100L, 5 BOXES (500 PCS.) : 245.00 EUR
Design. The fully automatic face mask production system designed for robust high-production mode.
Material. You can combine materials to achieve face masks with needed for you requirements �¢?? for medical or everyday use. Face masks. You receive multi-layer face masks of non-woven fabric, filter cotton or filter paper, nose rib, elastic ear string.
Production. 3000 per hour
Dimensions (L*W*H). 3500*6900*2000
Weight. 1tn.
Power consumption. 8kwh
Warranty. 24 months
After-sales support. We provide installation support and training on site, if requested and after-sale maintenance services.
