Jute (including kenaf) was an important foreign exchange earner for the producing countries during '60s. Even during the '70s, jute was an important commodity for most of the producing countries. However, during the '80s, bulk handling techniques and synthetic substitutes entered the market and jute started losing its predominant position in the market.
Geo Textile Netting made of Natural Coco Fiber in White or Brown Coir. (Machine or Hand woven). Used to control Soil Erosion, at work sites, road construction areas, river banks etc.. as a protective measure/Mesh. Can be used as backing for hydro seed spraying. Specifications Mesh Hole size : 20mm x 20mm or 30mm x 30mm or (As per buyer’s requirement for any pattern and size) Supplied in rolls any length and any width (up to 2 meters of maximum width).
Waterproof material The waterproofing material is one kind of performance outstanding pvc waterproofing material. The product takes the polyvinyl chloride resin as the main raw material, and joins each kind special-purpose auxiliary raw material and anti- aged ingredient. Our product is made from the advanced equipment and the advanced craft. Our product has the following outstanding characteristics, such as stronger stretch strength, higher elongation ratio, smaller shrinkage, longer service life, and it has good flexibility under the low temperature, etc. The waterproof material has different widths and different thicknesses, the widths include 1.05m, 2.05m 2.10m and the thicknesses include 0.8mmú¼ 1.0mmú¼1.2mmú¼1.5mmú¼2.0mm. The length is 10m.( the special specification may make to order). And also our product has stable performance, reliable quality and it is very convenient to install. Product characteristics: 1.Longer service life&anti- aged. It can be used for 20 years beyond the ground and be used for 50 years under the ground. 2.Stronger stretch strength, higher elongation ratio, slight change under the heat treatment. 3.Better permeability. It can adapt to different temperatures well. 4.It has good function to prevent the perforation. 5.It is very convenient to install. It is stable, environmentally friendly and has no pollution. 6.Better anti-corrosive and suitable the special situations. 7.Has the good plasticity, it is very convenient and quick to process the corner details. 8.Services conveniently, the cost is inexpensive 9.The shallow color superficial reflection ultraviolet ray illumination, the material surface absorbs less heat, so the temperature is low. 10.The material has good water vapor diffusibility, ití»s easy to discharge the cooling congeals the shape objects. And the moisture and humidity that remain to the basic unit are easier to be discharged.
Mapeband is designed for flexible sealing and waterproofing of expansion joints and crack subject to movement. It particularly used for waterproofing expansion joints in road works, water tunnels and covering applications. Technical Data: Melt index: 30 5g/10mim Density: 1 0.02g/cm3 Elongation: 500% Tensile strength: 1Mpa Shore hardness: 50 3A Shrinkage: 1% Color: Black, gray, customized Size: 120mm*50m/roll Functions: - Flexible waterproofing seal of expansion joints subject to large amounts of movement in service. - Flexible waterproofing seals in tunnels, road-works, etc. - Sealing expansion joints in prefabricated panels. Sealing structural joints in - Sealing joints in hydraulic works, such as channels, basins, drains, pipe-work, etc. - Waterproofing joints in road-works. - Waterproofing expansion joints in flat covering layers.
What is waterproof material-epdm waterproof membrane? This waterproof membrane is made from ternary ethylene-propylene rubber. Hongyuan adopts the world-advanced equipment of cold feeding extrusion and continuous vulcanization technology. With the best performance among high polymer waterproof materials, epdm is of exceptional elasticity and will not split or crack under normal building movement. What are the advantages? 1.Excellent weather-ability, durability and size stability 2.Good adaptability to high and low temperature, uv resistant and anti-corrosion 3.High tensile strength and good elongation, accommodating to structure movement 4.Easy installation, solid joint, and no environmental pollution 5.Good rooting penetration resistance 6.Service life up to 50 years Where is it can be used? 1.Roofs, basement, toilet 2.Industrial and civil building waterproofing 3.Geosynthetic liner for swimming pool, channels, irrigation system 4.Especially suit for projects with high requirements in durability, anti-corrosion and deformation How about the specification? Type epdm waterproof membrane Material Epdm rubber Thickness 1.0mm; 1.2mm;1.5mm;2.0mm Weight(kg/m2) 1.0mm 1.2mm 1.5mm 2.0mm 1.30-1.34 1.54-1.58 1.79-1.83 2.25-2.29 Length 20m/roll Width 1.2m/2.05m/4.0m Usage Basements, ponds, lake, steel structure roofing, underground, tunnels Packing 24/41/80 sqm/roll Loading in container Rolls Colors Black Packing detail: roll pallet Delivery detail: lead time 5~ 20 days
GEOTEXTILE is a superior quality product and its quantity capabilities have been tested and have been certified by KAN and international standards. Hilon Geotextile Non-woven products are the core of various types of industry, from mining, to construction, agriculture, manufacturing and infrastructure. Perfect non-woven products always deliver excellent results. The advanced machines in all our factories in Indonesia are world class machines such as DILO (Germany), Asselin (France) and Fehrer (Austria) which none of our competitors can match. And once the output leaves the machine, a neat delivery network ensures that transport times are reduced and deadlines are met. Our products have been widely used and referenced for various road projects throughout Indonesia. And currently, in accordance with existing technological developments, the application of our products is increasing in accordance with developing technology. Non woven products can be found at various important industrial points in Indonesia. Starting from mining, construction, agriculture, manufacturing, to infrastructure. We are also proud to take part in handling Government projects and partner companies, to help build Indonesia\'s future. Along with the growth and diversification of the existing economy, we also develop. Apart from that, GEOTEXTILE is also being developed to strengthen bunker layers on golf courses and also wrap perforated pipes. Stabilization Where the main function of geotextile stabilization is to spread the surface load more evenly, so that the soil can support the load well. Filtration Geotextiles to filter and prevent the migration of particles from soil/mud along with water flow in the construction system. so that water from the ground surface can flow well and quickly into the channels that have been prepared. Drainage A system for channeling surface water or subsurface water into drainage channels, where the drainage system must be able to separate soil, sand or rock material so that it does not join the water. To prevent other materials from entering the exhaust pipe, geotextile is needed to support the material, but not prevent water from coming out. Protection Geotextile is applied to protect geomembrane construction or other products from being punctured by sharp objects such as rocks, tree trunks or branches and others. Hilon geotextile is used before the geomembrane material is installed so as to prevent damage to the geomembrane. Separation Geotextiles as a separator mix two types of layers with different granulations (Soil-Stone/Stone-Sand), thereby increasing the protection of a more stable area. Concrete Curing Curing is a concrete treatment effort after the concrete has been cast. Concrete treatment is mandatory because it aims to maintain the humidity and temperature needed for cement to carry out the hydration process perfectly.
DESCRIPTION CC-103(1K) Crystalline Waterproofing Materials is fusion resin powders which contains water-soluble crystalline mineral coating with special additive syntheses. It will have a protective coating which is firm and impact resistance after curing. CC-103(1K) is a high technology product to prevent water leakage. ADVANTAGES * Prevent the constructions aging phenomenon * Avoid the leakage and mold on the wall * Effective against negative water pressure * With good stability * Non-Toxic APPLICATION * Internal and external walls * The leakage of inner wall in basements or the protection against negative water pressure * The construction of base isolated structures * Reservoir; drinking water pool * Contaminated water pool; water storage tank PROCEDURE 1. Ensure all surfaces which CC-103(1K) will be applied are clear. 2. Mix one pail(22.5KG) of CC-103(1K) and 4.5~5.0Liter water well by construction mixer. 3. Wait for 3-5 minutes and stir before use; use finishing trowel to smoothing or apply evenly with a nap roller. 4. Use finishing trowel to smoothing after using spray machine. PACKING 22.5KG per pail. STORAGE 6 months in original container stored in dry conditions. LIMITATION The crystalline products need to be used between 4 °C ~ 32 °C when applied.
DESCRIPTION CC-103(2K) Crystalline Waterproofing Materials is a capillary waterproofing formulation. CC-103(2K) has high permeability which crystallize and penetrate deeply into the capillaries of the concrete. ADVANTAGES * Applied to wet surface * Transparent, non-toxic and odorless * High cohesion and effective against positive/negative water pressure well APPLICATION * The leakage of inner wall in basements or the protection against positive/negative water pressure * Prevent seepage and leakage in underground passages and tunnels * Avoid the leakage of cisterns and pools PACKING 30KG/Set A: 22.5KG in powder.+ B: 7.5KG additive. COLOR Grey and white. STORAGE 6 months in original container stored in dry conditions and under 25°C.
The self-adhesive modified asphalt waterproofing membrane is a self-adhesive waterproof material which is made of an elastomer such as SBS and an asphalt, a polyethylene film, an aluminum foil as a surface material or a film (double-sided self-adhesive), and an anti-adhesion barrier layer. Self-adhesive rubber asphalt waterproofing membrane is a new type of building waterproofing material with broad development prospects. It has excellent water impermeability, low temperature flexibility, extensibility and cohesiveness. In particular, it has self-healing properties, which are advantages not found in general waterproof materials, and can ensure superior waterproof quality of waterproof engineering.
Type 1: adhesive polymer modified asphalt waterproofing coiled material Low tender degrees: - 10 Fetus: composite tires or polyester With one side adhesive side pe film as a benchmark, can customize the double-sided adhesive/sand shale surface/aluminum foil/face/colour sand surface Type 2: standard: gb/t23441-2009 Low tender degrees: - 20 or 25 Body: polyester tire Thickness of 1.5 mm at least With one side adhesive side pe film as a benchmark, can customize the double-sided adhesive/sand shale surface/aluminum foil/face/colour sand surface Packed in rolls with pallet
Performance feature: 1, Good physical and mechanic performance, high tearing resistance, 2, Strong deformation adaptability, puncture, aging, ultraviolet radiation, oil and salt, alkali and corrosion resistance, high and low temperature resistance, non-toxicity, 3, Long operational lift, good waterproof, drainage, anti-seepage and damp proof effects, complete width and thickness specifications, 4, Low cost and simple construction. Product application: 1. Environmental protection and environmental sanitation (for example, living landfill yard, sewage treatment plant, power plant adjusting tank, industrial and hospital solid waste, etc.). 2. Water conservancy (for example, anti-seepage, leakage blockage and reinforcement of river, lake and reservoir dikes and banks, anti-seepage of canal, vertical central wall, side slope, etc.). 3. Municipal projects (underground project of subway and structure, anti-seepage of plantation roof and roof garden, lining of sewage pipe, etc.). 4. Landscape garden (man-made lake, river way, cistern, bottom lining and side slope of pool in golf course, waterproof and anti-seepage of greening lawn, etc.). 5. Petrochemical industry (anti-seepage of oil tank of chemical plant, oil refinery and filling station, lining of chemical reaction tank and sedimentation tank, etc.). 6. Mine industry (bottom lining and anti-seepage of washing and selecting tank, piling and soaking tank, ash yard, dissolution tank, pile yard and tailing, etc.). 7. Traffic facilities (reinforcement of road foundation and anti-seepage of subway and culvert). 8. Agriculture (anti-seepage of ditch, channel, reservoir, drinking water tank, pool and irrigation system). 9. Aquiculture industry (lining of intensive and plant type cultivation tank, fish pound and shrimp pool, side slope of sea cucumber ring, etc.). 10. Salt industry (crystal tank of salt field, tarpaulin cover of halogenation tank, salt film, plastic tarpaulin cover of salt tank). Specification: 0.2mm to 2.5mm thickness; 2m to 10m width, 50m to 100m length per roll. Woven fabric in rolls.
Colored polyurethane underwater paint Product outline This product is colored. Non-tar double component green environmental protection underwater paint. The cold construction craft simple service convenience may carries on the construction under the normal temperature to the even roofing and each kind of structure complex spot. Whole Cheng Moxing good has rubber elastic elongation ratio the best pupil without the joint to be able to adapt the basic unit crack and the distortion. The cementation intensity high applicable scope is broad. But is welcoming the water to use by Shui Chushi is 1 level of waterproof ideal material. The service life long bears the period of five days to bear the aging, to bear the greasy dirt and certain acidproof alkalinity stable property service life may amount to above 20 years. Mainly uses in the roofing, side the subsurface construction, the ground construction and the building hit and the joint. Material amount used Generally each square meter needs 2-2.7kg thickness 1.5-2mm. to divide 3-4 coating, time coating wants evenly consistent. High and low spreads blows the direction to do alternately in any case. Each time the time interval decides general by the construction ambient temperature and the paint film solidification degree many in 24 hours. Does not stick take feel as the standard. Stick an adhesive-bonded cloth or the Bolivian filament cloth according to the design requirements also coca coating either the multi-layered middle shop are better. Paint film protection In order to lengthen the waterproof layer the service life to guarantee the project quality. On the person roofing makes the cement mortar protector on the paint film when the last paint film has not solidified. Scatters 2-3mm the granulated substance or the stone chips favors the paint film and the protector cementation.
J-match polyester insulation batts description: R-value: 3.5 Fiber dia.: 17.8~ 47.8ª8m Temperature: - 44 ~ +100íµ Thickness: 10~200ía2mm Percentage of moisture ín0.5% Hydrophobic rateí²98% Moisture rate each cubeín0.1% Wrvú+0.20md/cm2 Permanent set after compressed ín2% 45ípburning: difficult to burn Thermal conductivityín0.034% w/m. K Not toxic-gas during burning, doní»t drip 16pcs/pack, Pe package after vacuum compressed/
what is waterproof membrane-ram-cl reactive adhesive crossing-laminated membrane? 3.Apple green facial film eliminates light pollution compared to silver white surface. 4. Adaptability to weather change from hot area to cold district, good adhesion in special-shaped part with no empty hollowing. How about the specification? Materialscrossling-laminated hdpe, high polymer adhesive, asphalt Thickness1.2mm; 1.5mm; 2.0mm Width1.0m Length20m/roll or customized Surfaceapple green, other color need to be confirmed Packingwoben bag with hongyuan logo on packing material Packing detail: plastic film pallet Delivery detail: 5~7 days
Hesion in special-shaped part with no empty hollowing. applicable scope 1.Ram-cl membrane is recommended to apply in non-exposed roofs, underground waterproof projects, subways, tunnels and water channels. It is specially used in such constructions that no open fire is allowed to used. 2.Cement mortar is used to install ram-cl onto base, while self-adhesive is recommended to use between membrane sheets. product mechanism An ordinary hdpe film is single directional stretching film, waterproof membrane with this film is easily wrinkled when temperature change, even broken if heavy deformation. Hongyuan crossing-laminated hdpe filme is made by special formula. It overcomes shortcomings of ordinary film and have high tensile strength, solar stable and no bubbles. Besides, the longitudinal tensile strength of ordinary hdpe film is larger than its transverse tensile strength. While the longitudinal and transverse value of hongyuan ram-cl is equal, which enables the sheet has stronger adhesion on fasteners than ordinary membrane.
The products are made by soaking the base in bituminous or thermo plasticity elastomeror thermoplastics modified bitumenous, then covering double faces with elastomer(SBS)or thermoplastics(APP,APAO,APL)modified bitumenous, and last finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane while downward face with fine sands or polythene membrane. 100mm*10m
Asphalt compound embryo flexible waterproofing Product synopsis: The compound embryo flexible waterproofing volume material is take the polyester felt - grid cloth or the adhesive-bonded cloth - grid cloth as a carcass of tire, uses rubber resin, assistant and so on modified the asphalt to make the dip coating material, on the surface turns round may the curl laminated shape waterproofing material which by the polyethylene membrane, the granulated sugar, the mineral piece (grain) isolation materials and so on material or aluminum foil makes. Product execution country JC/T690-1998 "Asphalt Compound Embryo Flexible Waterproofing Volume Material" Characteristic Uses the compound carcass of tire, is advantageous in the improvement product performance, enhances the mechanical strength, the enhancement waterproofing performance; Has the wide temperature sector, serviceable; Uses compound carcass of tire, this kind of product low-price quality merchandise, and is durable. Applicable scope But widely uses in each kind of domain and the type project waterproofing, most is suitable for the below project type: Industry and civil construction roofing project waterproofing, including: Non-on person roofing, on conventions and special roofing project and so on person roofing, heat preservation roofing, non-heat preservation roofing, planter roofing, roof parking lot, inversion roofing; Industry and civil construction understructure work waterproofing, moisture-proof as well as construction and so on indoor swimming pool, fire basin waterproofing; The subway, the tunnel, the concretes lay the road surface the bridge floor, the sewage treatment field, trash to bury municipal engineering waterproofing and so on field; Water conservancy facilities waterproofing and so on canal, basin. Specification Breadth: 1000mm Thickness: Divides into 3mm and 4mm Area: Each beginning integral should not be 10m2 (3mm, 4mm). Physical mechanics performance Gusu the asphalt compound flexible waterproofing volume material physical mechanics performance achieves JC/T690-1998 "Asphalt Compound Embryo Flexible Waterproofing Volume Material" the standard request, its physical mechanics performance sees the next table.
KT series polyethylene suffers the polypropyle Product outline The KT series polyethylene suffers the polypropylene fiber high polymer compound waterproofing volume material is by the polyethylene class synthesis high polymer material waterproof layer, the increase assistant, provides for old age the level, the enhancement to increase the tacky surface and the polypropylene fiber adhesive-bonded cloth primarily the new waterproofing material which becomes after the automatic production line processing. * this product high and low surface roughness, the adhesive-bonded cloth textile fiber assumes without the rule overlapping structure, forms three-dimensional mesh, suits many kinds of material agglutinations, especially with cement material in solidification process direct agglutination, so long as does not have Mingshui then to be possible to construct, its overall performance is good, the tensile strength high, easy to cake, the friction coefficient small may suppose directly in the sandy soil uses, the stable property is reliable. Is one kind non-toxic, the non-pollution green environmental protection product. * this product is suitable for the industry and the civil construction roofing and the basement waterproofing, moisture-proof, separates was mad that the room inner wall, the ground are moisture-proof, bathroom waterproofing, water conservation pond storehouse, channel, arch of bridge waterproofing, anti-seepage, waterproofing and so on metallurgy chemical industry against pollution. Technical process Approves and sweeps clear the basic unit - - configuration adhesive (along with to use along with configuration) - - the node spot (masculine and feminine elements angle, eaves, to fall spots and so on drainage opening, pipeline hole) the extra ply construction - - waterproof layer construction - - waterproof layer approval - - protector construction.
I am Beijing Nimble bitumen membrane equipment CO.LT.We are mainly specialized in research,development and manufacture of equipment for bitumen membrane.Our company was established in 1991.It acts as the leading supplier of equipment for bitumen membrane in China, and a newborn force in international equipment industry for bitumen membrane.Beijing Nimble waterproofing membrane Corporation had focused on offering quality goods and on-time service,We can according to customer requirement to produce different types equipment from the small equipment to ten million ©O . Until now, we had served hundreds of customer from more than 10 countries in the world. Our equipment has exported to India,Russia,UKrine,Saudi Arabia ,North Korea,and We have a branch company In India now. ART 1 General information Technical parameters 1Production capacity: annual production of modified bitumen membranes of 3 million Sqm (16 hours/day, 300days/year with two shifts) Reinforcement: Polyester, Glass fibre Modified materials : SBS, APP 4Materials for surface: sand, scraps of stone, PE membrane, aluminum foil, etc. 5Specification of products: Width: 1m, thickness: 2-5mm, length: 7.5 or 10m 6Production speed: 0-20m/min¡£ 7Main workshop: 60¡Á (12-15) ¡Á£¨6-8£©m Labor required 5-7 workers are needed for the whole production line Boiler room: 2workers Modified workshop: 1-2 workers Production workshop: 2-3 workers Utilities Electricity: Alternating current, 380V50Hz60Hz Water Consumption: 2-3 T/D
The products are made by soaking the base in bituminous or thermo plasticity elastomer(such an styrene butadiene styrenef¼SBS),or thermoplastics(such as atactic Polypropylene---APP,APAO,APL)modified bitumenous, then covering double faces with elastomer(SBS)or thermoplastics(APP,APAO,APL)modified bitumenous, and last finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane while downward face with fine sands or polythene membrane. good self heating, easy application, and long service, etc.
