Fiberglass-Thread is a special sewing thread for glass fiber filter materials to sew filter bags. Glass fiber sewing thread can be divided into E-glass fiber sewing thread and C-glass fiber sewing thread according to different components. Sewing thread is made of high-quality alkali free glass fiber yarn, which is produced by a specific process into thread embryo and coated with organic matter. The treated yarn is smoother, softer, more durable, folding resistant, high temperature resistant, chemical corrosion resistant, high strength, etc. it does not untwist when sewing on high-speed industrial sewing machine, so as to ensure that the stitches are smooth, lint free and continuous during sewing. The sewn high-temperature filter bag is used at 280 �° high temperature, and will not crack or break the thread. Alkali free glass fiber sewing thread is commonly used in two specifications: ec6-12.5 4Z and ec6 - (12.5 4Z). Besides being used in the sewing of glass fiber and high temperature resistant filter material, it can also be used in the sewing of weak acid and weak alkali corrosion resistant fabric, and can also be used as the sewing thread of fire-resistant material, such as fire-proof bag, fire-proof blanket, smoke proof draper and fire-proof roll up curtain. It can be sewed by hand or by machine, however the folding and wear resistance of manual sewing is weakened by hand, so it is not recommended. Features: 1. High temperature resistance: up to 280 �° C; 2. Smooth appearance; 3. High strength, high modulus; 4. Corrosion resistance, aging resistance, weather resistance; 5. Insulation.
Stainless Steel Low Resistance Conductive Thread Stainless Steel is 316L stainless steel fiber as raw material, after spinning twisting obtained staple fiber yarn, mono-filament minimum diameter of 8 microns, with high conductivity, high thermal conductivity, high strength, high temperature resistance, corrosion resistance and other properties, but also has Chemical fiber, synthetic fiber characteristics. Features: 1. It's made of 100% 316L stainless steel fiber. 2. No peculiar smell, the yarn can be divided into single and yarn. 3. Compared with ordinary yarn, metal yarn has not only the performance of ordinary yarn, but also good conductivity and high strength; 4. Stainless steel material is resistant to various chemical corrosion, high temperature 650 â??, radiation protection, sound absorption, UV protection, filter ability and other characteristics, and the melting point is above 1300 â??. 5. Have passed the low resistance electrical test 6. Transfer electric hot wire: production of shielded tent, high temperature filter material and electronic field life buoy (jacket) Color: silver grey Specification: If there is any special requirement, it can be customized according to the sample or resistance requirements provided by the customer. (specification, breaking strength, elongation, average resistance) Package: 1. Single package 1000g net weight, 12 micron pure stainless steel wire, resistance 3.5 ohm; 2. The inner core is high strength Kraft paper tube, heat shrinkable package; 3. The bottom of each roll of paper core and the outside of the package are labeled with specifications in case of confusion of product models during use; 4. The label information is complete and clear.
Touchscreen Gloves Conductive Embroidery Thread At present, the main specifications are 21s and 32S single yarn, 32S / 2 and 120d / 2 conductive embroidery thread for touch screen gloves are available, there is also a 20s / 2 conductive sewing thread, which can be fixed dyed in various colors. The yarn composition is polyester, cotton and short metal fiber, with metal content of 24%. 20s / 3 and 250D / 3 can also be customized to spin other components or other specifications of conductive yarn according to the needs of customers. The conductive yarn can also be used for other kinds of products that need to be anti-static and have excellent conductivity. Features: â? It has passed the national point-to-point resistance test and embraces excellent conductivity. The power of the surface resistance 10^3, the measured resistance of the multimeter reaches to 23 ohms. â?¡ Silver fiber material is contained, the surface conductivity can reach 10^3 to the 10^6 of the customer's requirement, which is equipped with the functions of anti bacteria, anti radiation, anti odor and temperature regulation for human body. Moreover, it is suitable for the sewing use of anti-static and conductive products in various fields. â?¢It is made of polyester cotton and conductive metal fiber, with sensitive touch screen, bright color and strong color fastness. It is dyed with reactive dyes, with no harm to skin. Specificationsï¼?30S/2, 20S/2 Color: Customized dyeing, color fastness level reaches to 4-5. Applicable: Antistatic Shoes, Antistatic Clothing, Antistatic Hat, Antistatic Gloves (including cashmere gloves and knitted gloves)
â?¢ Threaded bars High tensile and Stainless Steel Fasteners as per National, International Standard & Customer Drawings. We are manufacturer of Threaded Bars, High Tensile Threaded Bars, Stainless Steel Threaded Rod, Steel Threaded Rod, Acme Threaded Rod, Threaded Rod Ends, Threaded Rod End, Threaded Rod End Bearings, High Strength Threaded Rod, Threaded Rod Coupling, Grade 8 Threaded Rod Plai Range / Dia upto 4"- 100 mm Length upto 120" (3000 mm) Drawings / Specifications We can manufacture any type of typical Fasteners as per your drawing and specifications FINISH : The above products are available in finish like Phosphate, Black Oxide, Galvanised, Hot Dip Galvanised, Cadmium Plating. Teflon- PTFE, Powder & many more as per Customer Requirements. We can also supply fasteners according to customers drawings and specifications.
Three yarn knitted fabrics, which are among the fabric types used in textile, are known as Three Ply Fleece in English. Unlike two yarn knitted fabrics, it is produced by using a third yarn with the addition of a third yarn to the ground and lining yarn. Of the three threads, which are generally used differently from each other, the ground yarn is provided with the first ground yarn, the surface with the second yarn, and the third yarn is stronger, and the lining yarn is not visible on the surface of the fabric.
A ribbon blender consists of a U-shaped horizontal trough containing a double helical ribbon agitator that rotates within. The agitatorâ??s shaft is positioned in the center of the trough and has welded spokes on which the helical ribbons (also known as spirals) are welded. Since the ribbon agitator consists of a set of inner and outer helical ribbons, it is referred to as a â??double" helical ribbon agitator. The gap between the ribbonâ??s outer edge and the internal wall of the container ranges from 3 to 6 mm depending on the application. Blending large volumes of dry solids. Dry powder to wet phase mixing. Mixing of bulk drugs, chemicals, and cosmetic powders. Dry Blending of capsule formulations. Lubrication of dry granules in large quantity. Heating, cooling, and drying of materials. Coating solid particles with small amounts of liquids to produce formulations.
Model: JT20200020 Specification: 25cm * 11cm Lace fabric for women, fine hot diamond 2mm size crystal white middle east diamond, letter pattern division, strong sense of craft, rich pattern, customizable, material optional, color optional, embossing machine 160 degrees 12 seconds can be transferred to clothing
Model: JT20200001 Specifications: 23cm * 19cm Women's special three-dimensional pattern lace fabric, fine hot diamond 2mm size crystal white Middle East diamond, pattern division, strong sense of craftsmanship, rich patterns, customizable, materials available, colors optional, embossing machine 160 degrees 12 seconds can be transferred to clothing
Material: Zinc alloy (iron/ brass/ copper/ zinc alloy etc.) Size: around 3.5cm or customized Shape: square / rectangle / roundness or customized Plated: gold plated. (silver or antique is optional) Enamel process Usage: promotional gifts / souvenirs / decoration etc. Customised: Yes Type: Lapel Pin Port: Shenzhen, Hong Kong Type of Payment: T/T, PayPal Minimum Order Quantity: 300 piece(s) Production Lead Time: 15 day(s)
Embroidery Patches Used For Garments,Bags,Caps And Etc..
Ribbon Blender comprises of a U-shaped horizontal trough and a specially designed Double Helical Ribbon Agitator rotating within.
Able Engineering is the leading manufacturer of stainless steel double ribbon mixers to be used in the food processing.
Poly-Poly Core Threads - are made by spinning a staple wrapper of polyester around a continuous filament of polyester fibers. Afterwards, two or more of these single yarns are twisted together to form the thread.
Polyester/Cotton corespun threads are produced by spinning the staple fibres of cotton and then wrapping this around continuous polyester filaments. Two or more plies of this standard yarn are doubled (twisted together) to make the sewing thread. The resultant thread provides superb strength from the polyester filament together with the characteristic soft feel of the cotton.
This kind of thread is produced from high tenacity low shrinkage low elongation continuous nylon(polyamide66) filament yarn twisted in advanced equipments. we can twist any count, plies and TPM, as per the clients needs in advanced equipments. We always use super high tenacity and low shrinkage filament. We can deliver heat-setted yarn(thread) in dye tubes ready for dyeing or in paper tubes. Make up 1.0kg, 1.5kg, 2.0kg, 3.0kg. For dyed finished thread, we can make up any meters (or weight) with king-spool as customers requested . Yarn Count: 70D/2, 100D/2, 100D/3, 210D/2, 210D/3; 280D/2, 280D/3 ; 420D/2, 420D/3; 630D/2, 630D/3; 840D/2, 840D/3; 1260/1 (Flat), 1260D/2, 1260D/3; Make-Up: Dyeing Tubes with 1.0kg, 1.5kg, 2.0kg, 3.0kg, for raw white King-Spool with 125Gr.,250Gr., 500Gr., 1Kg for dyed finished
Made from high tenacity filaments, and bonded with a special SOLVENT FREE finish, that protects it against friction and needle heat. Greige Yarn wound on dyeing tube ready for dyeing, the finished threads is used in footwear, upholstery, leather goods and automotive applications. Both Ex-Bonded and In-Bonded are available in a wide range of colors and sizes. Yarn Count: Dtex55/2; 78/2, 78/3; 111/2, 111/3; 135/2, 135/3; 150/2, 150/3; 233/3; 278/3; 466/3; 940/3; Put-Up: Dyeing tube with 1.0kg, 1.8kg, 2.0kg; 3.0kg, for raw white;
This kind of thread are produced from high tenacity low shrinkage low elongation continuous polyester multifilament yarn twisted in modern equipments. We always use super high tenacity and low shrinkage filament Yarn for production process, we can twist any count, plies and TPM as per the clients needs. Both middle tenacity (7.0g/d) and high tenacity(8.0g/d) is available. We can deliver heat-setted yarn(thread) in dye tubes ready for dyeing or in paper tubes. Make up 1.0kg, 1.5kg, 2.0kg, 3.0kg with knotless. Also,we can make up any meters (or weight) with king-spool for dyed finished thread as customers requested .We usually produce from Dtex55/2, 55/3, Dtex74/2,3 ,110/2,3 to dtex 3300/2,3,6,9,16
Bonded high-tenacity nylon 6.6 & 6 sewing thread. It means is covered with special resin that protects it against friction and needle heat. Greige Yarn wound on dyeing tube ready for dyeing, the finished threads is used in footwear, upholstery, leather goods and automotive applications. Both Ex-Bonded and In-Bonded are available in a wide range of colors and sizes. Yarn Count: 210D/2, 210D/3; 280D/2, 280D/3; 420D/2, 420D/3; 630D/2, 630D/3;840D/2, 840D/3; 1260D/1; 1260D/2,1260D/3; Make Up: Dyetube ready for dyeing with 1.0kg, 2.0kg, 30kg For raw white. King-Spool with 125Gram, 250Gram, 1 Lb, 1.0kg Approx; or as per customers requested.
Cocoon bobbins are used on schiffli embroidery & multi-needle lockstitch quilting machines equiped with shuttles. Made of cotton, poly/poly core spun, spun polyester, continuous filament nylon 6.6 and Polyester ,Textured Polyester Yarn and other specialty products . Applications: Mattresses,Quilts,Slee etc. Packing: 2.5kgs/bag, 20kgs/carton, or as customers requested
Spun polyester threads are produced by spinning together of the high tenacity and low elongation polyester fibers 1.2Dx38mm Bright or Semi-Dull into a single ply. Two or more plies are twisted to make a thread of the desired size. the former has the feature of few knot. Reverse SZ twist, specifically twisted for sewing thread. It can also be used for embroidery, quilting, weaving and knitting. The thinnest counts can also be used for cocoon and mini bobbins. It is presented in raw white (grey yarn) or in dope dyed optical white yarn. It is heat set (steam set) for best stabilization of the yarn. It is presented in dye tubes, ready for dyeing. Very wide count range from thicker Ne 12/4 to thinner Ne 80/2 Package: Dyeing tube with 1.0kg, 1.25kg, 1.36kg, 1.4175kg, 1.89kg for raw white Plastic Cone with 1000-5000m or as cunstomers requested for finished thread
