Uses Sample baking, drying and sample digestion test, is a necessary tool for geological, metallurgical, environmental protection, agriculture, grain and cooking oil, forestry, food, medical and health, biochemical and other laboratories, as well as teaching and research. Sample digestion before chemical analysis of soil, feed, plants, seeds, heavy metals, ore. It is an ideal equipment of sample pretreatment for analytical instruments such as AA, ICP, ICP-MS, and atomic fluorescence. It can also be used for preparation and acid steaming treatment of microwave digestion. Main features 1.Corrosion resistance: Resist all kinds of acids: sulfuric acid, hydrochloric acid, nitric acid, hydrofluoric acid, perchloric acid, aqua regia and so on. Resist Alkali and a variety of corrosive gases. 2.High temperature resistance: Max. temperature 350 . (Plate temperature) 3.Temperature uniformity: The temperature difference of each point on the surface doesnt exceed 5 C. Homogeneous batches of specimens (dozens of beakers) can reach boiling point at the same time. 4.Temperature control accurate: Can adjust temperature as desired, PID adjustment, temperature control accuracy: 0.1C. 5.Fast temperature rising: the time for room temperature rising to Max. temperature doesnt exceed 40 minutes, and the mean value is 6.9 seconds/C. 6. No pollution: The plate hardness: Vickers hardness 20, density 3.02, no scratches, no dropping slags. 7. Temperature measuring by the plate: The temperature displayed by the instrument is actual temperature of the plate surface (operating temperature). 8. Two heat zones: The Max. temperature of A main heating zone is 350C , and Max. temperature of B secondary heating zone is 210C . 9. Shell material: Metal coates high-quality ABS plastic. 10. Reuse: The undamaged plate system can be reused. 11. Safety of use: Multilayer insulation protection, in case of equipment failure, the alarm will be light and sound and stop work immediately.
Monopolar, Bipolar, Vessel Sealer, Saline Bipolar // Main Features: High Powered, Low Maintenance, Tropicalized, separate Monopolar and bipolar Generators, Tissue response technology, IGBT technology.
Now Let me introduce our great tempU06 L100 bluetooth temperature data logger for the COVID-19 vaccines. It can be used from -100 to 80. Advantages 1. High accuracy. The temperature accuracy is �±0.5â?? from -100â?? to 80â?? 2. support bluetooth and USB 3. reusable with battery replaceable design. 4. magnetic holder, very easy to install 5. IP65 water proof. 6. temperature probe replable. I am very happy to share more information with you.
Volumetric Flask, 500mL. These volumetric flasks are highly-transparent, easy-to-clean, and meet Class A tolerances per DIN EN ISO 1042.Flasks are manufactured from virgin PFA , which is highly resistant to heat and chemical contamination. PFA surface properties offer superior cleanability to glass, PTFE and polypropylene containers, reducing risk of sample carryover in trace analysis applications. These beakers are suitable for sterilization using heat, gas, and chemical methods for sensitive biological applications. Screw cap design provides reduced contamination risk, compared to traditional stopper design.
Volumetric Flask, 250mL. These volumetric flasks are highly-transparent, easy-to-clean, and meet Class A tolerances per DIN EN ISO 1042.Flasks are manufactured from virgin PFA , which is highly resistant to heat and chemical contamination. PFA surface properties offer superior cleanability to glass, PTFE and polypropylene containers, reducing risk of sample carryover in trace analysis applications. These beakers are suitable for sterilization using heat, gas, and chemical methods for sensitive biological applications. Screw cap design provides reduced contamination risk, compared to traditional stopper design.
Volumetric Flask, 100mL. These volumetric flasks are highly-transparent, easy-to-clean, and meet Class A tolerances per DIN EN ISO 1042.Flasks are manufactured from virgin PFA , which is highly resistant to heat and chemical contamination. PFA surface properties offer superior cleanability to glass, PTFE and polypropylene containers, reducing risk of sample carryover in trace analysis applications. These beakers are suitable for sterilization using heat, gas, and chemical methods for sensitive biological applications. Screw cap design provides reduced contamination risk, compared to traditional stopper design.
This is a measuring equipment , it is used in laboratory .to measuring any liquid's capacity of 10ml.
The Digital Bulk Density Apparatus is a microprocessor based instrument designed to study the packing down of powder beds of different pharmaceutical & chemical powders and gives accurate & repeatability of the result. Bulk Density is an essential test required in the process of Tablet manufacturing, capsules filling and cosmetics manufacturing as important part of quality control program. 4 digit microprocessor based Pre-set counter provided to set exact no of strokes. This feature eliminates the tedious calculation of Timer Mode. A common holder for both the cylinder drops down smoothly from the specified height. Easy to lock cushioned holders are provided to hold the cylinder. In power failure, the non-volatile memory of the microprocessor remember the last mode of operation, and complete the test after the power supply is resumed. It has the following features: Specifications : Display: Digital 12 mm Red LED Speed range - 30RPM Mechanical Timer/Digital counter as per enquiry.
Autoclaves for medical instrument sterilization and accessories Flow cytometry accessories, reagents, and components Laboratory balances and scales not to exceed 10 Kg Patient blood gas analyzers Medical specimen centrifuges Automated clinical chemistry analyzers for patient care Coagulation analyzers Co-oximeters for hemoglobin analysis Medical bone densitometers Medical differential counters Bench-top dry bath incubators Electrolyte analyzers Hematology analyzers Histology and cytology strainers and tissue baths Laboratory hot plates with less than 1.0 sq. ft. heating surface Clinical immunoassay analyzers Luminometers Laboratory pH meter (with or without temperature probe) Automated blood culture systems Microplate readers/washers Light microscopes Osmometers Pipettes Medical refrigerators and freezers with less than 5.0 cu. ft. internal volume Spectrophotometers, photometers, and colorimeters designed for clinical use Urinalysis analyzers Clinical laboratory water baths less than 10 liter Autoclaves for medical instrument sterilization and accessories Flow cytometry accessories, reagents, and components Laboratory balances and scales not to exceed 10 Kg Patient blood gas analyzers Medical specimen centrifuges Automated clinical chemistry analyzers for patient care Coagulation analyzers Co-oximeters for hemoglobin analysis Medical bone densitometers Medical differential counters Bench-top dry bath incubators Electrolyte analyzers Hematology analyzers Histology and cytology strainers and tissue baths Laboratory hot plates with less than 1.0 sq. ft. heating surface Clinical immunoassay analyzers Luminometers Laboratory pH meter (with or without temperature probe) Automated blood culture systems Microplate readers/washers Light microscopes Osmometers Pipettes Medical refrigerators and freezers with less than 5.0 cu. ft. internal volume Spectrophotometers, photometers, and colorimeters designed for clinical use Urinalysis analyzers Clinical laboratory water baths less than 10 liter
calibration pot manufacturers Manufacturing services including Large Machining, Heavy Machining, Heavy Fabrication, Large Fabrication, High Precision Machining, Precision Machining, Ultra Precision Machining, CNC Precision Machining Services Engineering Company
We have more than 20 years production experience for ampoules and vials which can be used for pharmaceutical ,cosmetic and healthy products. The production capacity reached 300 millions pcs per year. And we can produce as OEM mode to reach the requirement.
Climate Chambers including different kinds of Temperature( Humidity) Test Chamber, Low-pressure(Altitude Simulation) Test Chamber, Salty Mist Spray Test Chamber, Rain Spray Test Chamber, Thermal Abuse Test Chamber, High-Temperature Aging Test Chamber, etc. Contact us freely!
Environmental Chambers including different kinds of Temperature( Humidity) Test Chamber, Low-pressure(Altitude Simulation) Test Chamber, Salty Mist Spray Test Chamber, Rain Spray Test Chamber, Thermal Abuse Test Chamber, High-Temperature Aging Test Chamber, etc. Contact us freely!
Different types of Environmental Chambers are manufactured by Bell Experiment Equipment Co., Ltd. For example Temperature Cycling Test Chamber, Temperature(Humidity) Test Chamber, Low-pressure(Altitude Simulation) Test Chamber, Thermal Abuse Test Chamber, Thermal Shock Test Chamber, Salty Mist Spray Test Chamber, Rain Simulation Test Chamber, Sand Dust Test Chamber, Walk-in Temperature Humidity Test Chamber, etc.
The PAL-Urea is specifically designed to measure the Urea concentration of Diesel Exhaust Fluid (DEF), also known as AdBlue* in Europe. Already proven in Europe as the only reliable, go-to instrument for easy and accurate checks, the PAL-Urea is now available in North America in time for new 2010 EPA regulations on diesel emissions.DEF needs to have a 32.5% Urea concentration in order to work effectively in SCR engines. Make sure that the DEF that comes out of your pump and into your tank is pure in quality and safe from potentially harmful additives by using the only digital hand-held refractometer already trusted by European consumers.* AdBlue is a trademark of VDA
8 inches precision spin coater adopts all-aluminum alloy chamber, which is beautiful and sturdy in appearance; the upper cover of the chamber adopts 360�° visible plexiglass design, which is convenient for customers to observe the coating condition during use. The spin coater adopts advanced precision motor, the maximum speed can reach 10,000rpm, which effectively guarantees the uniformity of film formation. In addition, the instrument adopts touch screen control and can preset the coating curve, which greatly simplifies the use process and reduces the learning cost. It is very suitable for laboratory purchase. 8 inches precision spin coater application: The spin coater can coat liquid or colloidal materials on silicon wafers, crystals, quartz, ceramics and other substrates to form thin films. It is mainly used in photoresist spin coating, biological medium preparation, sol-gel method for polymer film production, etc.
The dual-target magnetron sputtering coating instrument is a small laboratory coating instrument with two targets developed by our company, which can be used to prepare single-layer or multi-layer ferroelectric thin films, conductive thin films, alloy thin films, semiconductor thin films, ceramic thin films , Dielectric film, optical film, etc. Compared with ordinary plasma sputtering, magnetron sputtering has the advantages of high energy and high speed. The coating rate is high and the sample temperature rise is low. It is a typical high-speed low-temperature sputtering. The magnetron target is equipped with a water-cooled interlayer. The water chiller can effectively take away the heat, avoid heat accumulation on the target surface, and make the magnetron coating work stably for a long time. Compared with similar equipment, this dual target magnetron sputtering coating instrument is not only widely used, but also small in size and easy to operate, it is an ideal equipment for preparing thin films in the laboratory.
We provide a variety of chemistry equipment that gives you a blast of experience with chemical reactions and their chemistry. So, get ready to understand the magic that happens in your laboratory. We classify our equipment in subcategories which will help you to conduct your experiments smoothly. They are:- Chemistry Glassware Balance Unit Chemistry instrument Chemistry Model Chemistry plasticware Thermometer and Hygrometer.
GZ Lab Sieve adopt well-qualified new type of energy generator generating multi-dimensions high frequency vibration to ensure high-efficient sieving and testing. According to different materials , customers can set different working time by adjusting time controller so that the analysis errors could be reduced to minimum and therefore guarantee analysis results unanimous.
GB 8410(Chinese Standard) Flammability Test to Motor Vehicle CASfire Technical Co.,Ltd have rich experience to provide GB8 410 Flammability of automotive interior materials. GB8410 Scope This Standard specifies the technical requirements and test methods for the horizontal flammability of automotive interior materials. This Standard applies to the assessment of automotive interior materials. As automotive interior parts (positions, layout and application conditions of the parts, ignition sources, etc.) differ considerably from the test conditions specified in this Standard, this Standard does not apply to the assessment of all the actual flammability of automotive interior materials. GB8410 Technical requirementsï¼? The flammability of interior materials must meet the following technical requirement: The burning rate is not greater than 100 mm/min. GB 8410 Test methodï¼? Fit the sample horizontally on a U-shaped support then ignite the free end of the sample on a flame of the specified height in the combustion box. 15 seconds later, determine whether the flame on the sample goes out or at what time it goes out, the burnt distance of the sample, and the time used in burning this distance. GB 8410 - Relative Standard FMVSS 302 Flammability of Interior materials SAE J369: Flammability of Polymeric Interior Materials Horizontal Test Method TL1010: Flammability ISO 3795:Road vehicles, and tractors and machinery for agriculture and forestry -- Determination of burning behaviour of interior materials DIN 75200:Determination of burning behaviour of interior materials in motor vehicles 95/28/EC: The burning behaviour of materials used in the interior construction of certain categories of motor vehiclesâ??, and is intended to ensure that they meet fire safety standards NF P 92-505: Safety against fire - Building materials - Reaction to fire tests - Test used for thermal melting materials - Dripping test. U.T.A.C 18-502 T1: burning behaviour of materials used in the interior construction of certain categories of motor vehicles BMW N 60121.0: BMW standard DBL 5307: Benz Standard GM L-T06-302G-79: GE Standard Mitsubishi ES-X60410: Oxygen Index VW TL 1010: burning behaviour Volvo STD 5031: burning behaviour Web:http://www.casfire.cn E-mail:info@casfire.cn
