Rotary evaporator is a device widely used in chemical laboratories for the efficient and gentle removal of solvents from samples by evaporation. These machines are most often used to separate solvents of low boiling points, such as n hexane or ethyl acetate, from compounds which are solid at room temperature and pressure. Careful application also allows removal of a solvent from a sample containing a liquid compound, if there are minimal co-evaporation and a sufficient difference in boiling points at the chosen temperature and reduced pressure.
The vacuum tube around makes room temperature more uniform, avoiding organic connecting with fires burring. Set temp and control are all intelligent digital display, high accuracy. All the models adopt jacketed vacuum glass door. On the one hand, it keeps the temp in room; On the other hand you can see the dried instruments clearly. The door that can be adjusted is overall the silicone rubber molding circle, which can insure the vacuum degree.
The DHG-Series forced air drying ovens are widely used in mining industry, laboratory, scientific research institute, etc for drying, baking and wax-melting, sterilization, etc. The oven inner use mirror stainless steel material. Shelf bracket could be installed and uninstalled freely. Semicircle four corners design makes cleaning more convenient. The oven is made of high quality cold-roll steel sheet, and its surface is anti-electrostatic plastic spraying.
Single layer glass reactor is an equipment which is a collaboration of vacuum state, distillation, reflux, stirring, oil/water heating, heating mantle. It can do all kinds of biochemical reactions and synthesis reactions at a constant temperature condition. It is also a closed system on the whole. Borosilicate glass with nice physical-chemical properties. Precision Mechanical seal stirring to keep high vacuum degree. Glass(PTFE)discharge valve, no-dead angle mixing, fast no residue discharge. Frequency control speed gear motor, smooth runningï¼?high torque, no spark, noise free, long life. SUS frame and cast aluminum material kettle body support, simple as well as strong; stable structure. Scientific & innovative structure, practical, strong.
Recirculating chillers is also known as Low-temperature circulating pump or Low temperature cooling water / liquid circulation pump. This device adopts mechanical refrigeration. The main function is providing low temperature liquid, low temperature water bath . It can also connect with rotary evaporator, vacuum freeze drying oven , cycle water vacuum pump , magnetic stirrer and so on, to achieve the chemical reaction or drug store under low temperature condition.
S-Series jacketed glass reactors are temperature and vacuum controlled instruments and pharmaceutical-grade mixing vessels with a 304 stainless steel reinforced PTFE agitator, capable of mixing and speeding up to 600 RPM. Constant speed, pressure and temp. Digital display, precise control Smooth discharge, no residue Borosilicate glass
Rotary evaporator is a device widely used in chemical laboratories for the efficient and gentle removal of solvents from samples by evaporation. These machines are most often used to separate solvents of low boiling points, such as n hexane or ethyl acetate, from compounds which are solid at room temperature and pressure. Careful application also allows removal of a solvent from a sample containing a liquid compound, if there are minimal co-evaporation and a sufficient difference in boiling points at the chosen temperature and reduced pressure.
Rotary evaporators come with a modular heating bath, vertical glassware, and digital temperature rotation control. The optimized bath volume allows fast heat-up times. The condenser unit has specially designed glass tubes that utilize surface extremely efficiently. We offer rotary evaporator with reasonable price, delivering reliable and reproducible process results, which is usually reserved for costly systems in the market.
Ac induction motor stepless speed regulation, no brushes, no sparks, long life. Ptfe sealing system, high vacuum degree, high evaporation rates and recovery rates. High quality borosilicate glass materials, good physical and chemical properties. Easy visual operation with digital speed and temperature display. Pid temperature controller for accurate temperature control.
ac induction motor stepless speed regulation, no brushes, no sparks, long life. ptfe sealing system, high vacuum degree, high evaporation rates and recovery rates. high quality borosilicate glass materials, good physical and chemical properties. easy visual operation with digital speed and temperature display. pid temperature controller for accurate temperature control.
Rotary evaporators come with a modular heating bath, vertical glassware, and digital temperature rotation control. The optimized bath volume allows fast heat-up times. The condenser unit has specially designed glass tubes that utilize surface extremely efficiently. We offer rotary evaporator with reasonable price, delivering reliable and reproducible process results, which is usually reserved for costly systems in the market.
ac induction motor stepless speed regulation, no brushes, no sparks, long life. ptfe sealing system, high vacuum degree, high evaporation rates and recovery rates. high quality borosilicate glass materials, good physical and chemical properties. easy visual operation with digital speed and temperature display. pid temperature controller for accurate temperature control.
Evaporatorâ is heated by water bath (oil bath) to form thin film under the negative pressure condition, evaporate, then condenseâ and recycle the solvent simultaneously. The apparatus are particularly suitable for the heat-sensitivity materialâ??s condensation, crystallization, separation, recovery and so on. It is an important instrument for scientific research, pilot and production in biological pharmacy, chemical engineering and food industries etc.
Rotary evaporator is a device widely used in chemical laboratories for the efficient and gentle removal of solvents from samples by evaporation. These machines are most often used to separate solvents of low boiling points, such as n hexane or ethyl acetate, from compounds which are solid at room temperature and pressure. Careful application also allows removal of a solvent from a sample containing a liquid compound, if there are minimal co-evaporation and a sufficient difference in boiling points at the chosen temperature and reduced pressure.
Rotary evaporator is a device widely used in chemical laboratories for the efficient and gentle removal of solvents from samples by evaporation. These machines are most often used to separate solvents of low boiling points, such as n hexane or ethyl acetate, from compounds which are solid at room temperature and pressure. Careful application also allows removal of a solvent from a sample containing a liquid compound, if there are minimal co-evaporation and a sufficient difference in boiling points at the chosen temperature and reduced pressure.
Evaporator is a specially designed instrument for the evaporation of solvent (single-stage or straight distillation) under vacuum condition. The evaporator consists of a heating bath with a rotating flask, in which the liquid is distributed as a thin film over the hot wall surfaces and can evaporate easily. The evaporation rate is regulated by the heating bath temperature, the size of flask, the pressure of distillation and the speed of rotation.
Lying Hyperbaric Oxygen Chamber Lying hyperbaric chambers are portable devices designed for hyperbaric oxygen therapy, allowing users to lie down comfortably while receiving treatment. These chambers are particularly suitable for home use, offering various features that enhance safety and comfort. Lying hyperbaric chambers are primarily used for therapeutic purposes, including: - Treatment of decompression sickness - Healing of chronic wounds - Recovery from infections - General health and wellness improvements through increased oxygen supply to tissues.
Multiplace Hyperbaric Oxygen Chamber Multiplace hyperbaric chambers are large medical devices designed to treat multiple patients simultaneously. They are typically used in hospital settings and can accommodate anywhere from 2 to 20 patients, depending on the specific chamber design. Features Capacity: Multiplace chambers can hold multiple patients at once, making them cost-effective for facilities that treat many individuals. The chambers are constructed from materials like steel or aluminum and can be pressurized up to 6 ATA (atmospheres absolute) using compressed air. Patients breathe 100% oxygen through hoods or masks during treatment. Design and Functionality: These chambers are designed to allow medical staff to enter and assist patients during treatment. They often include advanced features such as automated systems for pressurization and ventilation, ensuring a controlled environment for therapy. Some chambers have compartments for different patient needs, such as intensive care. Comfort and Use: While multiple chambers allow for simultaneous treatment, some patients may find the use of hoods or masks uncomfortable.
Monoplace Hyperbaric Oxygen Chamber Monoplace Hyperbaric Chambers are small chambers for hyperbaric oxygen therapy for a single patient. Our Monoplace Hyperbaric Chambers are available in different types, and the patient can enter these chambers in a sitting, standing or lying position. Single-occupancy chambers are usually pressurized with medical oxygen for hyperbaric oxygen therapy. In this case, the patient does not need to use a mask. Upon customer request, these chambers can be equipped with an additional system that allows the use of a mask inside the chamber, so that the patient can take air breaks during the hyperbaric oxygen therapy session, breathing air through the mask. These chambers are called "hybrid chambers". Hyperbaric oxygen therapy involves breathing pure oxygen in a pressurized chamber or chamber. When body tissues are injured or damaged, they need more oxygen to survive. Hyperbaric oxygen therapy increases the amount of oxygen carried by the blood; the increase in blood oxygen promotes tissue healing and helps fight infection because blood gases are temporarily returned to normal levels. Hyperbaric oxygen therapy is used to treat a variety of conditions.
Medical Hyperbaric Chamber Medical Hyperbaric Chamber is designed to meet the growing demand for hyperbaric oxygen therapy. Our chamber is engineered to provide high-quality care to patients with various medical conditions, delivering increased oxygen levels to promote faster healing and recovery. These chambers deliver 100% pure oxygen at pressures significantly higher than normal atmospheric pressure, often under the supervision of medical professionals, typically at pressures of 2 to 3 times the normal atmospheric pressure, in a controlled and monitored environment. This high concentration of oxygen enhances healing processes at the cellular level. Hyperbaric Chambers In Medical Applications Our Medical Hyperbaric Chamber stands out with its cutting-edge technology, ensuring a safe and efficient experience. Itâ??s perfect for medical facilities looking to expand their treatment capabilities and offer an effective solution for conditions like: Severe anemia Brain abscess Air embolism (air bubbles in blood vessels) Burns Carbon monoxide poisoning Crush injuries Sudden hearing loss Decompression sickness Gangrene Skin or bone infections leading to tissue death Non-healing wounds, such as diabetic foot ulcers Radiation injury Skin grafts or flaps at risk of tissue death Sudden, painless vision loss
