Livestock frozen sperm storage liquid nitrogen tanks are the ultimate line of defence for guarding genetic resources. In the modernisation of the livestock industry, the protection and utilisation of genetic resources is the key to improving the quality of breeding stock and achieving sustainable development. TIANCHI`s special liquid nitrogen tanks for animal husbandry, designed for long-term storage of frozen sperm in animal husbandry, can provide the most reliable protection for your genetic resources bank. Here's how the liquid nitrogen tank for livestock frozen sperm storage can effectively preserve the samples: 1. Efficient heat preservation, stable as one: the frozen sperm liquid nitrogen storage tank adopts advanced vacuum multi-layer insulation technology, passing 100% product testing, and the low-temperature effect is better than international standards. 2. Superb craftsmanship, safety: the tank is made of high-strength aluminium alloy, which is lightweight and durable, together with the anti-knock PU protective cover, it can ensure the activity and safety of the frozen sperm samples even under the bad transport conditions; 3. Simple operation and intelligent prompting: it can be equipped with intuitive liquid level indication and easy-to-operate filling system, which makes frozen sperm storage simple and quick. 4. Widely used, complete models and accessories: livestock frozen sperm storage liquid nitrogen tanks are divided into 2L, 3L, 6L, 10L, 16L, 30L, 35L and 47L. 16L frozen sperm storage tanks are a popular frozen sperm storage tanks for livestock users; wide base design, stable chassis, not easy to shake and tilt, not only large capacity but also can be used with a large amount of liquid nitrogen, and can be used with a large amount of liquid nitrogen, and can be used with a large amount of liquid nitrogen.
PFA wash bottle that can hold propane Product features 1. Translucent appearance; 2. Temperature resistance -200+260; 3. The pipe and the body are sealed reliably, the sprayability is sensitive, the recovery is fast, and no residue flows out. It can be sprayed into the position of each container and is easy to clean; 4. The nozzle and bottle cap are formed at one time; 5. It can replace the volumetric flask to configure the standard solution: it can be controlled to add sample and water drop by drop.
1 Product Introduction PFA volumetric flasks, also known as soluble polytetrafluoroethylene volumetric flasks or Teflon volumetric flasks, are available in two new options: threaded and plug-in. Currently, there are specifications of 10ml, 25ml, 50ml, 100ml, 250ml, 500ml, and 1000ml available, ensuring product quality. The Teflon series PFA volumetric flask is a transparent long neck bottle with a pear shaped body, making it easy to shake liquids and scrub. The scale lines on each PFA volumetric flask are measured and labeled using an electronic balance of one thousandth. Widely used in trace analysis and isotope analysis experiments such as ICP-MS, ICP-OES, environmental monitoring, semiconductor, polysilicon, photovoltaic electronics, and lithium battery industries. In various testing laboratories, good quality performance will not affect the purity of the test samples. 2ã?? Product performance 1. Good transparency, stability, visible to the naked eye with a smooth surface of the bottle volume, smooth inner and outer walls of the bottle, easy to clean, non adhesive to the sample, and no liquid residue on the inner wall of the bottle mouth; 2. The bottle mouth and cap are well sealed, and the matching threaded cap is tight, so there will be no leakage of liquid when placed upside down or on the side; 3. Resistant to strong acids, alkalis, aqua regia, various laboratory commonly used strong corrosive acids, and various organic solvents; 4. Low background and low precipitation: There is no dissolution or precipitation, and the low background can reach the low detection limit of ICP-MS. It is a container for storing standard materials, strong corrosiveness, and expensive ultra-high purity reagents; 5. High and low temperature resistance: operating at temperatures ranging from -200 to+260 ; 6. Pollution prevention: The value of metal elements is low, and the content of metal elements such as lead and uranium is less than 0.01PPb;
1. Product introduction PFA, also known as soluble polytetrafluoroethylene and Teflon, can be used for trace analysis, isotope detection, ICP-MS/OES/AAS analysis and other experiments. Capacity (ml):5/10/25/30/50/100/200/250/500/1000/2000 2. Product characteristics 1. Strong corrosion resistance: PFA material has excellent acid and alkali resistance and can be used for measuring various chemical liquids without being corroded. 2. High transparency: The transparency of PFA material is relatively high, and the volume of the liquid can be clearly observed. 3. High accuracy: PFA measuring cylinder has precise graduation lines, which can provide accurate liquid volume measurement results. 4. Good heat resistance: PFA material can withstand high temperatures, so it is suitable for some experiments that need to be conducted under high temperature conditions. 5. Insulation resistance: dielectric properties have nothing to do with temperature and frequency; 6. Anti-pollution: low metal element value; 7. It has low dissolution and precipitation characteristics and is a container for storing standard substances and different reagents; 3. PFA series products: Sample bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes, etc.
Advantages: 1.Excellent Chemical Resistance: The PFA pipette tips exhibit remarkable chemical stability, resisting corrosion from harsh chemicals like acids, bases, and organic solvents. This ensures consistent performance and accuracy in demanding laboratory environments. 2.Wide Temperature Range: These pipette tips can withstand a broad temperature range from -200�°C to 260�°C, making them suitable for both low- and high-temperature applications. 3.High Precision and Accuracy: The PFA pipette tips offer precise and accurate dispensing of liquids, ensuring consistent and reliable results in laboratory experiments. 4.Low Background Values: With low metal element content (such as lead and uranium) of less than 0.01ppb, these pipette tips are suitable for high-sensitivity analytical techniques like ICP-MS and trace analysis. 5.Customizable Options: The pipette tips are available in different sizes and can be customized to fit various pipette models, meeting the specific needs of different laboratories. Durable and Reusable: The excellent stability of PFA material allows these pipette tips to be used repeatedly over a long period, reducing the need for frequent replacements and saving costs. 6.Easy to Clean: The smooth surface and precise manufacturing of these pipette tips ensure easy cleaning and minimal residue, maintaining the accuracy and reliability of the tips. 7.Transparent and Easy to Observe: The transparent design allows users to easily observe the liquid level inside the pipette tip, making it convenient for accurate dispensing. In summary, the PFA pipette tips from Nanjing Binzhenghong Instrument Co., Ltd. are an excellent choice for laboratories requiring high chemical resistance, precision, and accuracy in liquid handling applications.
1. Product introduction The polytetrafluoro (PFA) beakers produced by our factory can be used for trace analysis, isotope analysis and other experiments, and are suitable for ICP-MS laboratories. Applicable to semiconductor, polysilicon, photovoltaic electronics and lithium battery industries. The cup body has clear markings for easy observation, and the pointed spout makes it easy to pour the solution. 2. Product features: 1. Transparent, with raised scales, chemical resistance and heat resistance, resistant to various chemical solvents such as acids and alkalis, HF and organic solvents; suitable for preserving chemicals and samples; 2. Can be autoclaved at 121 (2 bar), in compliance with DIN EN 285. The flanged design facilitates clamping and movement, dissipating heat and increasing mechanical strength; there is a mouth on the edge for easy pouring of liquids; the use of high-purity raw materials makes it easy to clean, and can be used with our company's electric heating plates and digesters 3. High thermal stability, good transparency and smooth surface; 4. It is often used as a reaction vessel for preparing dissolved substances and smaller amounts of substances at room temperature or under heating; 5. Low precipitation: low metal ion dissolution and precipitation, it is a container for storing standard substances, corrosive and pure reagents; 6. High and low temperature resistance: operating temperature -200~+260; no memory effect; 7. Anti-pollution: low metal elements have low blank values; 8. It is suitable for laboratories such as trace and ultra-trace analysis and isotope analysis. It is a clean experimental analysis vessel; 9. Comply with the requirements of laboratories or testing institutions, as well as medical testing, trace testing, etc. for experimental equipment, for trace analysis and containing high-purity organic solvents (for example: high-purity water, HF, acetone and other organic solvents, etc.); 3. PFA series products: Reagent bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes and other products.
freezing in laboratory, and industrial freezing accessories. Let's talk about the 10-liter liquid nitrogen storage tank in detail 1.Caliber The common models of TIANCHI 10 liter storage liquid nitrogen tanks are 50mm, 80m, 125mm and 210mm; Among them, 50mm is more suitable for a small amount of sample preservation, or simply storing liquid nitrogen for use, with a longer static preservation time; 80mm caliber is similar to 50mm, which is more suitable for a small amount of sample preservation but easy to take. Due to the short static storage time, the frequency of use is not as good as the above two calibers, so 125mm and 210mm are more suitable for short-term storage of liquid nitrogen, and users who don't care about the storage time can use them. 2.Structure Like all liquid nitrogen containers, the 10 liter liquid nitrogen storage tank also has a double bladder vacuum and multi layer insulation structure, and the insulated neck plug closes the mouth of the tank to reduce heat radiation and liquid nitrogen volatilization. 3. Static preservation and sample storage capacity 10 liters of liquid nitrogen storage tanks are better at liquid nitrogen storage, 50mm caliber static storage time of 87 days; in descending order, 80mm caliber 50 days, 125mm has 25 days, 210mm only 11 days. Note that this is static storage, that is, when filled with liquid nitrogen and not opened and not used. Plus sample storage, with a full complement of 6 round carrying buckets, you can keep around 792 to 1,788 frozen sperm wheat tubes; and around 150 cells, which can be paired with cryopreservation clips. Understand the liquid nitrogen tank to use it better.Above is the basic information about 10 liter liquid nitrogen storage tank. Want to know more, feel free to contact us, if you have any need, also welcome to consult at any time.
Advantages: 1.High Thermal Efficiency: The graphite digestion instrument utilizes graphite as its heating element, which offers excellent thermal conductivity and even heat distribution. This ensures rapid and uniform heating of samples, improving digestion efficiency. 2.Excellent Temperature Control: The instrument is equipped with precise temperature control systems that allow for accurate temperature adjustments and stable operation. This ensures that samples are digested at optimal temperatures, minimizing the risk of over- or under-digestion. 3.Versatility: The graphite digestion instrument is designed to handle a wide range of sample types and volumes. It can be used for digesting solid, liquid samples, making it a versatile tool for various analytical applications. 4.Ease of Operation: The instrument's user-friendly interface and intuitive controls simplify the operation process. Users can easily set parameters, monitor digestion progress, and retrieve results, all with minimal training. 5.Durability and Longevity: The use of high-quality materials and components in the construction of the graphite digestion instrument ensures its durability and longevity. It can withstand frequent use and rigorous laboratory conditions, providing reliable performance over extended periods. 6.Environmentally Friendly: The graphite digestion instrument contributes to a greener laboratory environment by reducing the use of hazardous chemicals and reagents. It also helps minimize waste generation and energy consumption.
Advantages: 1.Material Selection: The inner vessels are crafted using modified polytetrafluoroethylene (TFM), PFA, and PTFE materials, ensuring superior chemical resistance and durability. This choice of materials guarantees a low background value and enhanced performance. 2.Purity and Cleanliness: The vessels are manufactured in a clean environment, without the addition of any recycled materials, ensuring a high level of purity. This results in more accurate and reliable experimental data. 3.Compatibility: These vessels are designed to be fully compatible with various manufacturers' microwave digestion instruments, including CEM models, ensuring seamless integration and operation. 4.Temperature Resistance: The TFM material used in the vessels exhibits excellent resistance to high and low temperatures, ranging from -200°C to +260°C, with a maximum tolerance of up to 300°C. This allows for safe and efficient operation under extreme conditions. 5.Deformation and Permeability Resistance: The TFM material offers improved resistance to deformation and permeation under high temperatures and pressures. This ensures the integrity of the vessel and prevents sample leakage or contamination. 6.Recovery and Durability: The vessels exhibit excellent recovery properties after exposure to high temperatures and pressures, ensuring their long-term durability and reliability. 7.Cost-Effectiveness: While offering comparable or superior performance to original equipment manufacturer vessels, the NJbinglab vessels are priced at a fraction of the cost, significantly reducing expenses for research and scientific institutions. 8.Specialized Production Process: The company employs specialized production processes that ensure a high level of smoothness and cleanliness of the vessel walls. This further enhances the accuracy and reproducibility of experimental results. 9.Customization Options: The company offers customization options, allowing customers to request vessels tailored to their specific needs and requirements. This flexibility ensures that the vessels meet the precise specifications of each application. In summary, the microwave digestion vessels from Nanjing Binzhenghong Instrument Co., Ltd. offer a combination of superior material properties, compatibility, durability, cost-effectiveness, and customization options that make them an excellent choice for scientific and research applications requiring high-performance microwave digestion vessels.
Advantages: Excellent Corrosion Resistance: It is coated with Teflon, a high-quality anticorrosive material, making it resistant to strong acids and alkalis. This ensures long-term stable operation of the equipment. Fast Heating Speed: The anti-corrosive cast aluminum hotplate has a rapid heating speed, which can quickly increase the temperature of the digestion solution and shorten the sample processing time. No Cross-Contamination: It allows for the simultaneous processing of multiple samples without causing cross-contamination. Reduced Metal Components: The DBF-type electric hotplate's supports are made entirely of polytetrafluoroethylene (PTFE), significantly reducing the entry of metal parts into the laboratory. Customizable Features: It offers customizable time-setting functions, segmented temperature control, and can be processed with different board surfaces according to requirements. Intuitive Display and Safety Functions: The liquid crystal display (LCD) offers features such as buzzer alarms and automatic power-off for added safety. Easy Operation and Maintenance: The anticorrosive electric hotplate has a simple structure, making it easy to operate and maintain. Energy Efficiency and Environmental Friendliness: Compared to traditional heating methods, it has higher energy utilization efficiency, reducing energy consumption and environmental pollution. In summary, the anticorrosive electric hotplate from Nanjing Binzhenghong Instrument Co., Ltd. offers superior performance in terms of corrosion resistance, heating speed, safety, and energy efficiency, making it an excellent choice for various laboratory applications.
1. Product introduction The PFA cleaning tank is an upgraded model after the PTFE cleaning bucket. It is specially designed for semiconductor photovoltaic and other industries. It is formed in one piece, so there is no need to worry about leakage. Mainly used for soaking and cleaning flower baskets or wafer cassettes with chip silicon cells. Due to the characteristics of PFA, it can withstand the corrosiveness of cleaning solutions. At the same time, it has a low blank value of metal elements, no dissolution or precipitation, and will not contaminate chip wafers. Other names: anti-corrosion tank, pickling tank, overflow tank, pure water tank, soaking tank, water tank, drip tank Tank capacity: 15L External dimensions: 300*210*240mm Lid: 340*240*45mm Tank capacity: 18L External dimensions: 390*280*205mm Lid: 400*300*42mm Semiconductor wafer cleaning tank size can be customized as required. It also comes with the same PFA lid to prevent contamination. 2. Features: 1. The appearance is translucent, making it easy to observe the reagents in the tank; 2. High and low temperature resistance: -200ï½?+260â?? 3. Corrosion resistance: resistant to strong acid, strong alkali, aqua regia, HF and various organic solvents; 4. Insulation resistance: dielectric properties have nothing to do with temperature and frequency; 5. Anti-pollution: The background value is low, and the content of lead and uranium of metal elements is less than 0.01ppb; 6. No dissolution or precipitation, and will not pollute chips, wafers, silicon wafers, etc.; 8. Stable chemical properties, good recoverability, and not easy to deform; 9. Teflon plastic, durable and not fragile.
PFA acid purification system: 1. Product introduction: Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid. 2. Working principle: The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments. 3. Product features: 1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids. 2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.
Advantages of PFA Test Tubes: 1.Excellent Chemical Resistance: PFA, also known as perfluoroalkoxy, is a fluoropolymer that exhibits superior resistance to almost all chemicals, including acids, bases, solvents, and oxidizing agents. This ensures that your samples and reactions remain unaffected and uncontaminated during experimentation. 2.High Temperature Tolerance: PFA test tubes can withstand extreme temperatures ranging from cryogenic to over 260�°C. This broad temperature range makes them suitable for a wide variety of applications, including high-temperature reactions and cryogenic storage. Excellent Transparency: PFA test tubes offer excellent optical clarity, allowing for clear and undistorted observation of samples and reactions. This is crucial for accurate monitoring and analysis in laboratory experiments. 3.Low Adsorption Properties: PFA has low adsorption properties, minimizing the risk of sample loss or contamination due to adsorption on the tube walls. This ensures the integrity and purity of your samples. 4.Physical Stability: PFA test tubes are physically robust and stable, maintaining their structural integrity even under extreme conditions like high-speed centrifugation. Applications of PFA Test Tubes: 1.Chemical Industry: In the chemical industry, PFA test tubes are widely used for storing and transporting various chemicals due to their excellent chemical resistance. They are especially suitable for handling corrosive and reactive chemicals. 2.Semiconductor Manufacturing: In the semiconductor industry, PFA test tubes are used for transporting high-purity chemicals and reagents. Their material does not release any impurities, ensuring the purity of the manufacturing environment. 3.Photovoltaic Industry: PFA test tubes are also used in the photovoltaic industry for handling strong acids, bases, and high-purity chemicals during the manufacturing process. 4.Biological and Pharmaceutical Industries: In the biological and pharmaceutical industries, PFA test tubes are used for storing and transporting biomedical samples, reagents, and drugs. Their chemical inertness ensures that the samples remain unaffected and uncontaminated. 5.Laboratory Applications: PFA test tubes are extensively used in laboratories for various scientific experiments, especially those requiring minimal interaction with chemicals. Their transparency, chemical resistance, and temperature tolerance make them ideal for accurate monitoring and analysis. web: https//www.njbinglab.com/
Product advantage: 1.Chemical Resistance: PTFE laboratory barrels exhibit excellent chemical resistance to a wide range of acids, bases, solvents, and other chemicals. This ensures that the barrels can safely contain and store various laboratory chemicals without degrading or reacting with the contents. 2.Non-Stick Properties: The non-stick nature of PTFE makes it ideal for laboratory barrels that require easy cleaning and prevention of residue buildup. Liquids and solids tend to slide off the surface easily, reducing the need for harsh cleaning agents. 3.Temperature Resistance: PTFE has a high operating temperature range, making it suitable for use in extreme temperature conditions. This allows laboratory barrels to be used in various applications, including those involving high-temperature reactions or storage of chemicals with varying temperature requirements. 4.Durability: PTFE is a durable material that can withstand repeated use and harsh conditions. Laboratory barrels made from PTFE are designed to last for extended periods, reducing the need for frequent replacements and lowering maintenance costs. 5.Electrical Non-Conductivity: PTFE is an electrical insulator, making it an excellent choice for laboratory barrels that need to be electrically isolated or protected from electrical interference. 6.Easy to Fabricate: PTFE can be easily fabricated into various shapes and sizes, including the large barrels required in laboratories. This flexibility allows for the creation of custom-sized barrels that meet specific laboratory needs.
Advantages of PFA flasks: 1.Excellent Thermal Stability: PFA flasks possess outstanding heat resistance, enabling them to withstand temperatures ranging from -200�°C to +260�°C. This thermal stability is crucial for many high-temperature experiments, such as heating reactions, boiling, and high-temperature solvent extraction. 2.Superior Transparency: PFA flasks exhibit excellent transparency, allowing for clear observation of reaction processes and sample changes. This is crucial for monitoring and recording reactions in chemical experiments, enabling researchers to better understand and analyze the progress and results. 3.Anti-Adhesion Properties: PFA flasks have good anti-adhesion properties, meaning reagents are less likely to adhere to the inner walls. This reduces loss and waste, while maintaining the cleanliness of the flask's interior and preventing any potential contamination from adhering substances. 4.Excellent Electrical Properties: PFA flasks are excellent electrical insulators, effectively isolating electrical currents and reducing interference from electrochemical reactions. 5.Good Mechanical Properties: PFA flasks possess good mechanical strength and abrasion resistance, enabling them to withstand high pressures and impacts. Industries of Application: 1.Laboratory Research: In laboratory environments, PFA flasks are widely used for various chemical reactions and experiments due to their high purity, chemical stability, and ability to withstand extreme temperatures. 2.Semiconductor Manufacturing: The semiconductor industry requires the use of ultrapure water and specialized chemicals. PFA's high purity, corrosion resistance, and high-temperature stability make it an ideal material for ensuring product quality and reliability in this sector. 3.Chemical Industry: PFA is a primary material in the chemical industry, particularly for pipelines that handle corrosive chemicals. Its excellent corrosion resistance allows it to withstand harsh environments and ensure the safety and stability of chemical production processes. 4.Pharmaceutical Industry: PFA is widely used in the pharmaceutical industry for pipelines and equipment that handle drugs and chemical reagents. Its corrosion resistance, non-toxicity, odorlessness, and tastelessness make it an ideal choice for ensuring drug quality and safety. 5.Food and Beverage Industry: PFA flasks and connectors are suitable for the food and beverage industry, where high-purity materials and compliance with food safety standards are crucial. 6.Medical and Biotechnology: PFA connectors are commonly used in medical devices and biotechnology equipment, such as drug delivery systems and laboratory analysis equipment, due to their corrosion resistance and non-toxicity. In summary, PFA flasks offer numerous advantages that make them suitable for a wide range of applications across various industries.
Product advantages: 1. Excellent Chemical Resistance: PFA provides excellent chemical resistance to most acids, bases, salts, organic solvents, and oxidizing agents. This ensures that the laboratory ware can withstand harsh chemical environments without degradation or contamination. 2. Wide Temperature Range: PFA can be used in a wide temperature range from -200�°C to 260�°C, allowing it to handle both low and high-temperature applications in the laboratory. 3. Non-Reactive and Non-Adhesive: PFA's surface is non-reactive and non-adhesive, making it ideal for experiments where sample adherence or contamination is a concern. 4. Good Mechanical Properties: PFA has good mechanical properties, including tensile strength and flexibility, ensuring that laboratory ware made from PFA is durable and reliable. 5. Transparent and Easy to Clean: PFA laboratory ware is often transparent, allowing for easy observation of samples and reactions. Additionally, its smooth surface makes it easy to clean and maintain. 6. Biocompatible: PFA is biocompatible, meaning it is safe for use in experiments involving biological samples and does not pose any health risks. 7. Electrically Insulating: PFA's electrical insulating properties make it suitable for use in electrical experiments and applications where electrical conductivity is a concern. 8. Variety of Forms: PFA can be molded into various forms of laboratory ware, such as flasks, bottles, test tubes, beakers, and funnels, providing flexibility in experimental setup. In summary, PFA's chemical resistance, wide temperature range, non-reactivity, good mechanical properties, transparency, biocompatibility, electrical insulating properties, and variety of forms make it an excellent choice for laboratory ware. web: https://www.njbinglab.com/
PFA series parallel reaction bottle is an efficient and multifunctional chemical reaction device. Its core advantage lies in the use of PFA (soluble polytetrafluoroethylene) material. PFA has excellent high and low temperature resistance and a wide range of operating temperatures. It can maintain stability in extreme environments and ensure a safe and controllable reaction process. In addition, PFA has extremely high chemical stability and can tolerate almost all chemical solvents, effectively preventing cross-contamination and ensuring the purity of reaction results. Its dielectric properties are excellent, and its electrical insulation is not affected by temperature, providing a stable electrical environment for experiments. In terms of structural design, the PFA series parallel reaction tanks are connected in series and parallel, which can flexibly adjust the reaction process and improve reaction efficiency. At the same time, its transparent and colorless appearance makes the reaction process clear at a glance, making it easy to observe and monitor. In summary, the PFA series parallel reaction tank provides strong support for laboratory research with its excellent PFA characteristics and efficient design, and the entire device supports customization.
Application Climate test chambers are commonly used in electronic appliances, military, plastics, hardware, chemical, textile and other industries. Specific test products such as electronic parts, automotive parts, notebooks, batteries, packaging, cosmetics, circuit boards, temperature, moisture meters, etc.If you need more models about our test equipment, please reference our chamber-testingï¼?.ï¼?com JOEO climate chamber manufacturers are available in many pre-designed and customized sizes to meet your exact test requirements, and the models available for environmental chamber testing include a wide range of temperature ramp rates, humidity levels, and many standard and optional features, including temperature cycling, steady-state testing, and rapid rate of change. Other options include access ports, explosion-proof, quiet mode, additional shelving, battery safety options, dry air purge, dehydrated water filtration system and more. Features Climatic Test Chambers manufacturers support customized your specifications Fast Temperature Change Rates Higher airflow rates â?? More efficient testing Multiple airflow options Roll-In style floors for safe and easy loading/unloading Many additional features and options available for� climatic test chamber Refrigeration System Compressors equipped with world famous brand such as Tecumseh (France made), Bitzer or GEA BOCK (Germany made). It applies Denmark DANFOSS and Japanese SAGLNOMIYA solenoid valves to improve the overall reliability of the equipment. MP10 module has motor over-heating protection (with LED indicator), exhaust temperature over-heating protection (requires optional temperature monitoring probe and LED indicator), power indicator, alarm function. Electrical System The overall layout of the circuit cabinet looks very neat and professional. Our circuits are arranged in accordance with UK standards and are equipped with complete circuit diagrams. Each line has a unique code which is clearly defined and easy to locate for troubleshooting. We use electrical components of world famous brands, such as Schneider from France,Carlo Gavazzi from Switzerland,Mitsubishi from Japan,Rainbow from Korea.
Application Environmental chamber manufacturers are� widely used to test the heat resistance, cold resistance, dry resistance, moisture resistance of various materials, JOEO environmental test chambers has a unique design and high-quality materials, whether you are testing aerospace products, electronic instruments, materials, food, medical, electronic and electrical products and various electronic components, JOEO environmental test chamber can give you the perfect solution.If you need more models about our test equipment, please reference our chamber-testingï¼?.ï¼?com What your Most Care with needed ? Environmental test chambers� evaporator no frosting under longtime Low temperature running. Automatic control system refrigerant demand save electricity above 30% High heat load tested samples test environment Realize high temperature ultra-low temperature range control ability Multi-language selection: Chinese, English,Other Language support Customized� Russian, Korean, Japanese, German � multilingual language switching. Environmental test chambers temperature can reach -70C ~ 200C, special optional condition
Application Benchtop temperature chamber can meet certain quality standards and testing specifications ,for example: Daily necessities, cosmetics, electronic components, and medical products .� Most ideal designed for temperature and humidity testing of small samples and specimens used for research, development and quality control.� This dimension are very cute. customer can fit on a personal desk is the most consideration.If you need more models about our test equipment, please reference our chamber-testingï¼?.ï¼?com Feature: Our JOEO Benchtop Temperature Chamber's window is equipped with an anti-sweat electric heater device to prevent water vapor from condensing and water droplets, and high-brightness PL fluorescent lamps keep the interior of the box illuminated;Rectangular multi-layer glass viewing window, which can be used to observe the test items during the test.� With automatic-water supply system, it is convenient to supplement the water supply of the humidification barrel, and it can be recycled and used automatically. High-quality appearance, the body adopts an arc shape, the surface is treated with matte stripes, and the flat non-reaction handle is adopted, which is easy to operate, safe, and reliable. High quality original compressor circulation system adopts the French â??Tecumsehâ??& Germany "Bitzer" brand, which can effectively remove the lubricating oil between the condenser tube and the capillary tube, and the whole series adopts environmentally friendly refrigerants (R23, R404, R507). Double-layer insulation of ess chamber door is tight and airtight, which can effectively isolate internal temperature leakage.� Built-in moving pulley is easy to move and place and has a strong positioning screw to fix the position. Controller has multi-segment program editing and temperature, and humidity can do fast (OUICK) or slope (SLOP) control. Self-developing controller system adopts an imported LCD screen, which can display the measured value, set value, and time at the same time. Announcements: Do not place the sample in the oven heating state, and place the sample in the state of ensuring that the heating is off;� When placing the sample, there should be a certain space around the upper and lower parts to keep the air flow in the box smooth; There is a cooling plate on the heating wire at the bottom of the chamber, and the sample can not be placed on it, so as not to affect the heat flow and lead to heat accumulation; If the sample will have a phase change at high temperature, it must be packed in a tray to avoid contaminating other samples (for example, it will leak oil or change from solid to liquid after heating); Containing flammable and explosive organic volatile solvents or auxiliaries shall not be put into the chamber.
