ac induction motor stepless speed regulation, no brushes, no sparks, long life.
ptfe sealing system, high vacuum degree, high evaporation rates and recovery rates.
high quality borosilicate glass materials, good physical and chemical properties.
easy visual operation with digital speed and temperature display.
pid temperature controller for accurate temperature control.
Evaporatorâ is heated by water bath (oil bath) to form thin film under the negative pressure condition, evaporate, then condenseâ and recycle the solvent simultaneously. The apparatus are particularly suitable for the heat-sensitivity materialâ??s condensation, crystallization, separation, recovery and so on. It is an important instrument for scientific research, pilot and production in biological pharmacy, chemical engineering and food industries etc.
Rotary evaporator is a device widely used in chemical laboratories for the efficient and gentle removal of solvents from samples by evaporation. These machines are most often used to separate solvents of low boiling points, such as n hexane or ethyl acetate, from compounds which are solid at room temperature and pressure. Careful application also allows removal of a solvent from a sample containing a liquid compound, if there are minimal co-evaporation and a sufficient difference in boiling points at the chosen temperature and reduced pressure.
Rotary evaporator is a device widely used in chemical laboratories for the efficient and gentle removal of solvents from samples by evaporation. These machines are most often used to separate solvents of low boiling points, such as n hexane or ethyl acetate, from compounds which are solid at room temperature and pressure. Careful application also allows removal of a solvent from a sample containing a liquid compound, if there are minimal co-evaporation and a sufficient difference in boiling points at the chosen temperature and reduced pressure.
Evaporator is a specially designed instrument for the evaporation of solvent (single-stage or straight distillation) under vacuum condition. The evaporator consists of a heating bath with a rotating flask, in which the liquid is distributed as a thin film over the hot wall surfaces and can evaporate easily. The evaporation rate is regulated by the heating bath temperature, the size of flask, the pressure of distillation and the speed of rotation.
4939 Laboratory Equipments Instruments Suppliers
Short on time? Let Laboratory Equipments Instruments sellers contact you.
EN 45545-2 Compliant Smoke & FTIR Analyzer | KDM Global
KDM Global presents a high-precision Smoke and FTIR Toxic Gas Analyzer that combines optical smoke density measurement and multi-gas FTIR analysis in one advanced system. Fully compliant with EN 45545-2 Annex C, ISO 5659-2, and ASTM E662, this equipment is specially designed for fire testing of materials used in railway interiors, metro coaches, cables, and polymer-based components.
This dual-function setup is ideal for railway OEMs, testing laboratories, and material R&D centers needing to assess both smoke generation and toxic gas emission during material combustion, especially to classify according to Hazard Levels HL1, HL2, and HL3 under EN 45545-2.
Key Features
EN 45545-2 Annex C Compliant
Designed to meet the fire safety testing requirements for materials used in passenger rail vehicles.
Smoke Density Chamber (ISO 5659-2)
Measures optical smoke density under radiant heat exposure at 25 and 50 kW/m² with a sealed test chamber and photometric detection.
FTIR-Based Gas Detection (NF X70-100)
Real-time analysis of critical toxic gases including CO, CO-, HCl, HCN, NO, NO-, and SO- using Fourier Transform Infrared Spectroscopy.
ASTM E662 Support
Capable of performing both flaming and non-flaming smoke and gas emission testing for plastics and cable materials.
Toxicity Index Calculation
Software calculates the Conventional Index of Toxicity (CIT) for classification of materials according to EN 45545-2 performance levels.
User-Friendly Software
Advanced control interface with automated test sequences, gas concentration tracking, spectral display, and data logging.
Toxic Gas & Smoke Analysis Machine - ASTM E662, FTIR Based | KDM Global
KDM Global offers a state-of-the-art Toxic Gas & Smoke Analysis Machine that combines FTIR-based gas detection with smoke density measurement, fully compliant with ASTM E662, EN 45545-2 Annex C, and NF X70-100 standards. This advanced system is engineered for precise analysis of toxic gas emissions and optical smoke density during the combustion of railway, cable, plastic, and construction materials.
It is a critical component in any fire testing laboratory seeking to evaluate materials for low smoke and low toxicity performance, especially for compliance with railway safety classifications under EN 45545-2 Hazard Levels HL1, HL2, and HL3.
Core Capabilities
- Smoke Density Testing - ASTM E662 Mode
Measures specific optical density of smoke in flaming and non-flaming modes
Controlled radiant heat exposure chamber with adjustable heat flux
Accurate analysis of smoke evolution during material decomposition
- FTIR-Based Toxic Gas Detection - NF X70-100 Protocol
Real-time, multi-component gas analysis via Fourier Transform Infrared Spectroscopy
Simultaneous detection and quantification of:
Carbon Monoxide (CO)
Carbon Dioxide (CO-)
Hydrogen Chloride (HCl)
Hydrogen Cyanide (HCN)
Nitric Oxide (NO)
Nitrogen Dioxide (NO-)
Sulphur Dioxide (SO-)
Generates concentration profiles and calculates the Conventional Index of Toxicity (CIT)
- Fully Integrated System
Combines smoke and gas analysis in a single platform
Controlled combustion, gas sampling, and FTIR analysis in one workflow
Built-in calibration gas ports and automatic system diagnostics
- Advanced Control & Reporting Software
Real-time spectral acquisition, gas quantification, and curve plotting
Automatic CIT calculation as per EN 45545-2
User-friendly interface for test configuration, result logging, and report generation
Target Industries & Applications
Railway and Metro Coach Manufacturing - HL1/HL2/HL3 material certification
Cable & Wire Producers - Testing of sheaths, insulation, and jackets for LSHF applications
Plastic & Polymer Manufacturers - Material development and flammability assessment
Building Material Suppliers - Smoke and toxicity compliance for construction products
Fire Testing Laboratories - Type approval, R&D, and third-party certification testing
Standards Covered
ASTM E662 - Smoke and gas emission testing
NF X70-100 - FTIR toxic gas analysis protocol
EN 45545-2 Annex C - Toxicity compliance for railway interiors
ISO 5659-2 - Optional integration for smoke chamber-based tests
Supports interoperability with Cone Calorimeter (ISO 5660) for extended fire behavior evaluation
FTIR Smoke Density Tester - ISO 5659 + EN 45545-2 Fire Test Equipment | KDM Global
KDM Global offers the advanced FTIR Smoke Density Tester designed for combined smoke generation and toxic gas emission analysis in accordance with ISO 5659-2 and EN 45545-2 Annex C. This integrated system enables accurate fire behavior testing of materials used in railway coaches, metros, electrical cables, and polymer products, supporting compliance with international fire safety standards.
This system is widely used by railway OEMs, fire testing laboratories, certification bodies, and research institutions for qualifying materials under Hazard Levels HL1, HL2, and HL3 as specified in EN 45545-2.
Key Features
ISO 5659-2 Compliant Smoke Chamber
Measures optical smoke density under controlled radiant heat at 25 kW/m² and 50 kW/m².
EN 45545-2 Annex C FTIR Toxic Gas Analysis
Real-time detection of toxic gases such as CO, CO-, HCl, HCN, NO, NO-, SO- using FTIR spectroscopy as per NF X70-100 standard.
ASTM E662 Support
Capable of non-flaming and flaming mode testing for cable jackets, polymers, and plastics.
Fully Integrated Software
Automated gas quantification, spectral data logging, smoke curve generation, and CIT (Conventional Index of Toxicity) calculation.
Dual-Function Setup
One compact unit handles both smoke and toxicity evaluation-space-efficient and cost-effective.
Applications
Fire safety qualification of railway interior materials (EN 45545-2 HL1/HL2/HL3)
Metro coach lining, insulation, and seating material testing
Electrical wire, cable sheath, duct, and foam product fire testing
Plastic and polymer component R&D and compliance verification
Type approval and third-party certification lab usage
Compliance Standards
EN 45545-2 (Annex C) - Toxicity testing for railway interiors
ISO 5659-2 - Smoke density testing for materials
ASTM E662 - Smoke emission testing from plastics
NF X70-100 - FTIR gas analysis protocol
Optional integration with Cone Calorimeter (ISO 5660-1)
Why Choose KDM Global?
Manufacturer of ISO, EN, ASTM compliant fire testing equipment
Expert in railway and metro fire testing solutions
Smoke & FTIR Toxic Gas Analyzer - EN 45545-2, ISO 5659, ASTM E662 | KDM Global
KDM Global offers a high-precision Smoke & FTIR Toxic Gas Analyzer engineered for comprehensive fire safety testing of materials used in railway, metro, cable, and polymer industries. Designed to comply with EN 45545-2 Annex C, ISO 5659-2, and ASTM E662, this integrated system evaluates both optical smoke density and toxic gas emissions during combustion.
This equipment is ideal for OEMs, certification labs, and R&D centers requiring accurate data to determine the Conventional Toxicity Index (CIT) and to meet Hazard Level (HL1, HL2, HL3) classification for railway interior materials.
- Key Features
EN 45545-2 Compliant
Fully meets Annex C requirements for measuring smoke and toxic gases from burning materials.
Dual Function System
Combines ISO 5659-2 smoke density testing with FTIR-based toxic gas analysis in one setup.
FTIR Gas Detection (NF X70-100 Standard)
Real-time identification and quantification of key gases:
CO, CO-, HCl, HCN, NO, NO-, SO-
Radiant Heat Exposure
Supports 25 and 50 kW/m² heat flux modes to simulate real fire conditions.
Advanced Software
Includes spectral analysis, auto gas calculation, graph plotting, and CIT evaluation.
Standards Supported
EN 45545-2 (Annex C) - Railway fire safety
ISO 5659-2 - Smoke density under radiant heat
ASTM E662 - Smoke generation and toxicity from plastics
NF X70-100 - FTIR gas analysis protocol
Supports integration with ISO 5660 Cone Calorimeter (optional)
EN 45545-2 Fire Testing Lab Setup & Equipment Solutions - KDM Global
KDM Global specializes in complete EN 45545-2 fire testing laboratory setup and certified equipment solutions, designed to meet the rigorous fire safety requirements for railway and metro applications. Our turnkey lab setup services ensure that your testing facility complies with international fire testing standards, enabling accurate testing and certification of materials used in rail vehicle interiors.
Whether you are an OEM, railway component manufacturer, or certification lab, we provide everything from infrastructure planning and machine manufacturing to installation, calibration, and training.
- What We Offer
Complete Turnkey Lab Setup
Civil & electrical layout planning
Exhaust, ventilation, and safety system integration
BIS & EN 45545-2 documentation support
Standard-Compliant Equipment Supply
Our in-house manufactured machines cover all key EN 45545-2 Annex C requirements:
Smoke Density Chamber - ISO 5659-2: Measures optical smoke density at 25 and 50 kW/m².
FTIR Toxic Gas Analyzer - EN 45545-2 Annex C, ASTM E662, NF X70-100: Detects CO, CO-, HCl, HCN, NO, NO-, SO-.
Cone Calorimeter - ISO 5660-1: Measures heat release rate, ignition time, and smoke production.
Oxygen Index Apparatus - ISO 4589-2: Determines oxygen concentration required to support combustion.
UL 94 Flammability Tester - Horizontal and vertical burn tests for plastic and polymer materials.
Glow Wire & Needle Flame Tester - IEC 60695 standard testing for electrical components.
Installation, Calibration & Training
NABL-traceable calibration certificates
On-site installation and test validation
Operator training, SOP handover, and lab start-up support
High-Performance Railway Flammability Testing Equipment EN 45545-2 Certified | KDM Global
KDM Global offers a complete range of EN 45545-2 Certified Railway Flammability Testing Equipment designed for high-performance fire safety evaluation of railway coach materials. Our systems are engineered for accurate measurement of heat release, smoke density, toxicity, surface spread of flame, and ignitability, as required by European railway fire standards.
Whether you're a rolling stock manufacturer, testing laboratory, or government compliance body, our fire testing solutions help you meet the Hazard Level HL1 to HL3 requirements under EN 45545-2.
Our Railway Fire Testing Equipment Includes:
ISO 5660 Cone Calorimeter for Heat Release Rate (HRR), Smoke Production, and Mass Loss
ISO 5659 Smoke Density Tester with optional FTIR gas analyzer for toxic gas measurement
Single Flame Source Tester (ISO 11925-2) for ignitability evaluation
ISO 9239 Radiant Panel Test Apparatus for flooring material fire performance
NCD 1409 Toxicity Chamber for smoke toxicity under controlled combustion
Customised Machines designed for non-standard samples and integrated test setups
Designed for Fire Testing Laboratories & OEMs
KDM Global supports complete fire testing lab setup for the railway industry. From individual equipment supply to full lab design, utility layout, calibration, and operator training, we provide end-to-end solutions.
Compliant with ISO, EN, and ASTM railway fire standards
Modular or integrated configurations available
Ideal for R&D labs, certification centers, and in-house QA testing
Custom-built machines and lab automation available on request
Why Choose KDM Global?
EN 45545-2 Certified Equipment for all relevant Annexes and Test Methods
Customised Fire Testing Machines for railway interior components
Full support for Fire Testing Lab Setup, including utilities and layout
Indian manufacturing with global standard compliance
After-sales support, AMC, and calibration services across India
Complete Railway Flammability Testing Equipment - EN 45545-2 Fire Safety Solutions | KDM Global
KDM Global offers a comprehensive suite of Railway Flammability Testing Equipment built to meet the stringent safety requirements of EN 45545-2. Our complete solutions are designed for the fire testing of railway interior materials, ensuring compliance with hazard levels HL1, HL2, and HL3 across all key test parameters including flammability, smoke generation, heat release, and toxic gas emission.
Integrated Fire Testing System for Railways
Our railway fire testing equipment range covers all essential tests required under EN 45545-2:
ISO 5660 Cone Calorimeter: Measures heat release rate (HRR), total smoke production, and combustion behavior of interior materials.
ISO 5659-2 Smoke Density Tester: Simulates low-visibility conditions and quantifies optical smoke density.
FTIR Gas Analyzer (NCD 1409 Compliant): Identifies and measures toxic gases such as CO, CO , HCN, HCl, NOx.
ISO 11925-2 Small Flame Ignitability Tester: Evaluates ignition behavior of vertically mounted samples under a small flame.
EN 1363/BS 476 Fire Resistance Chambers: Tests full-scale panels and constructions for fire propagation and insulation integrity.
Applications
Interior paneling, seat materials, floor finishes, cable insulation, coatings, and foams used in passenger coaches, metros, and locomotives.
Used by railcar manufacturers, fire testing laboratories, regulatory bodies, and component suppliers.
Why KDM Global?
All systems are calibrated, automated, and designed for long-term precision testing.
Expert support, installation, and standard-compliance training included.
Built to ensure conformity with EN 45545-2 fire protection requirements.
Railway Coach Interior Flammability Testing Equipment - EN 45545-2 Standard Compliant | KDM Global
KDM Global offers advanced Railway Coach Interior Flammability Testing Equipment designed in full compliance with EN 45545-2 the key European standard for fire safety in railway applications. Our solutions help ensure that materials used in rail coach interiors meet fire hazard classification levels HL1 to HL3, enabling manufacturers and labs to test for ignitability, heat release, smoke generation, and toxic gas emission with accuracy and repeatability.
Complete Testing Coverage for Coach Interiors
ISO 5660 Cone CalorimeterMeasures heat release rate (HRR), smoke production, and mass loss of interior materials such as wall panels, seats, and flooring.
ISO 5659-2 Smoke Density Chamber Assesses optical smoke density to simulate low-visibility emergency scenarios.
FTIR Gas Analyzer (NCD 1409 Compliant) Detects and quantifies hazardous gases like CO, CO, HCN, HCl, NOx, and others.
ISO 11925-2 Small Flame Ignitability Tester Determines how quickly materials ignite under a direct flame.
EN 1363/BS 476 Fire Resistance Chambers Evaluate fire containment and propagation in full-scale assemblies.
Applications
Coach interior panels, insulation foams, electric wire coverings, floor laminates, and seat upholstery
R&D and regulatory compliance testing
Railcar manufacturers, suppliers, and test laboratories
OEM quality control & safety validation
Why Choose KDM Global?
All systems come with standard compliance documentation, automated data logging, and real-time analysis.
Installation, training, and calibration support provided across India and internationally.
Trusted by railway OEMs, fire safety labs, and certification agencies.
EN 45545-2 Flammability Testing Equipment -Certified Systems for Railway Fire Safety | KDM Global
KDM Global provides advanced EN 45545-2 Flammability Testing Equipment engineered to assess the fire behavior of materials used in railway vehicle interiors. Designed for compliance with European railway safety standards, our equipment supports testing for flammability, heat and smoke release, and toxic gas emission, aligned with Hazard Levels HL1, HL2, and HL3.
Our systems are widely used by rolling stock manufacturers, research labs, testing authorities, and OEM suppliers to meet mandatory fire safety protocols under EN 45545-2.
Key Equipment Modules
Cone Calorimeter (ISO 5660) - Measures heat release rate, mass loss, and smoke production
Smoke Density Chamber (ISO 5659-2) -Assesses optical density and visibility in smoke-filled environments
FTIR Gas Analyzer (NCD 1409 Compliant) - Detects toxic gases such as CO, CO, HCl, HCN, and NOx
ISO 11925-2 Flammability Tester- Evaluates material resistance to small flame ignition
BS 476/EN 1363 Fire Resistance Systems - Validates performance of wall panels, doors, and barriers
R&D laboratories and government fire test facilities
Certification and third-party compliance testing
OEM quality control and production assurance
Compliance & Support
All KDM Global systems are built for high-accuracy testing, full data acquisition, and long-term reliability. We offer on-site installation, calibration services, maintenance contracts, and operator training to ensure full utilization and regulatory adherence.
EN 45545-2 Railway Flammability Testing Equipment Flame, Smoke & Toxicity Tester | KDM Global
KDM Global offers a high-performance range of EN 45545-2 Railway Flammability Testing Equipment designed to evaluate the fire safety performance of materials used in railway coaches and infrastructure. Our integrated systems test for flammability, heat release, smoke production, and toxic gas emission, ensuring compliance with Hazard Levels HL1, HL2, and HL3.
All equipment meets the European railway fire standard EN 45545-2, and is suitable for testing seat covers, insulation, cables, flooring, wall panels, and other interior components used in passenger rail systems.
Key Equipment in the Testing Suite
ISO 5660 Cone Calorimeter Measures Heat Release Rate (HRR) and Smoke Production
ISO 5659-2 Smoke Density Chamber Analyzes smoke visibility and optical density
FTIR Toxicity Analyzer (NCD 1409) Quantifies toxic gas emissions like CO, CO, HCl, HCN
ISO 11925-2 Ignitability Tester Assesses reaction to small flame exposure
BS 476 & EN 1363 Fire Resistance Testers â?? Measures fire propagation and structural integrity
HL1-HL3 compliance validation for European rail operators
Third-party pre-certification and R&D
Routine quality assurance for OEMs and railway part suppliers
Why Choose KDM Global?
KDM Global delivers precisely engineered flammability testing equipment backed by calibration, AMC support, and training. Our systems are known for accurate measurement, user-friendly interface, and long service life. We help rail OEMs, testing labs, and manufacturers meet international safety requirements efficiently and affordably.
Railway Fire & Flammability Testing Equipment (EN 45545-2) | KDM Global
KDM Global offers a comprehensive range of Railway Fire & Flammability Testing Equipment engineered to comply with the stringent requirements of EN 45545-2, the European standard for railway fire safety. Our solutions are designed to evaluate the flammability, smoke generation, heat release, and toxic gas emissions of materials used in railway vehiclesâ??including seating, wall panels, flooring, insulation, and cabling.
This integrated testing suite enables manufacturers, testing labs, and rail suppliers to certify products against hazard levels HL1, HL2, and HL3, based on operational categories and design classifications. From small flame ignition to smoke density and toxic gas analysis, KDM Global delivers reliable equipment to support full compliance.
Core Applications
Railway interior material compliance (HL1 to HL3)
Component safety validation for seating, ducting, partitions, insulation, and cables
Pre-certification testing before third-party approvals
In-house R&D and QA programs for OEMs and testing labs
Why KDM Global?
KDM Global is a trusted manufacturer of EN 45545-compliant fire testing solutions. Our systems are designed for ease of use, accurate measurement, and long-term performance, backed by on-site calibration, AMC, and technical support. With decades of experience in fire safety engineering, we help clients meet global railway safety standards effectively and affordably.
Heat & Smoke Release Flammability Testing Equipment â?? ISO 5660, EN 45545-2 Compliant | KDM Global
KDM Global offers advanced Heat & Smoke Release Flammability Testing Equipment designed for precise measurement of fire behavior in materials used across railways, construction, plastics, and automotive industries. This system combines the capabilities of the ISO 5660 Cone Calorimeter with optional FTIR integration to evaluate heat release rate (HRR), smoke production, and toxic gas emissions during combustion.
Engineered in compliance with ISO 5660 and EN 45545-2, this flammability testing system provides critical fire reaction data such as time to ignition, peak HRR, total heat release, and mass loss rate, which are essential for ensuring product safety in fire-critical applications. It plays a vital role in meeting hazard level requirements (HL1, HL2, HL3) for railway interior materials.
Core Features
Adjustable cone heater: 0-100 kW/m heat flux range
High-sensitivity load cell: Monitors material degradation
Exhaust system with oxygen analyzer: Measures heat release by oxygen depletion
Photometric smoke density system: Quantifies visibility reduction
Optional FTIR analyzer for toxic gas detection (CO, CO, HCN, etc.)
Automated data acquisition with user-friendly reporting software
Compliance & Use Cases
Fully compliant with ISO 5660, EN 45545-2, and ASTM E1354
Widely used in railway component testing, construction fire safety evaluations, and product certification labs
Ideal For
Rail coach interiors: Panels, foams, cables, flooring
Construction & insulation materials: Wallboards, polymers
Plastic and rubber: Consumer & industrial fire safety testing
Automotive interiors: Safety compliance for components
Why Choose KDM Global?
KDM Global is a leading manufacturer of fire and flammability testing equipment, delivering customized, internationally certified solutions. Our systems are known for reliability, precision, and ease of use backed by calibration, maintenance, and support services.
ISO 5660 Cone Calorimeter Flammability Testing Equipment -Heat Release Rate System | KDM Global
The ISO 5660 Cone Calorimeter from KDM Global is a precision-engineered flammability testing system used to evaluate the heat release rate (HRR), mass loss, smoke production, and ignition behavior of materials under controlled radiant heat exposure. It is one of the most widely accepted instruments in fire testing, ideal for evaluating the reaction-to-fire performance of construction products, polymers, electrical cables, railway interiors, and more.
Built to meet ISO 5660-1 standards, this equipment utilizes the oxygen consumption principle to accurately measure the amount of heat released during combustion. It is essential for industries that require detailed combustion profiles, including building materials, railway transport, aerospace, automotive, and plastics manufacturing.
Key Features
Advanced cone heater with programmable heat flux up to 100 kW/m�²
Precision load cell for mass loss rate measurements
Exhaust gas analysis via oxygen and CO/CO ensors
Smoke density chamber with laser photometric detection
Time to ignition, peak HRR, and total heat release (THR) calculations
Fully automated software for real-time monitoring and reporting
Standards & Compliance
Complies with ISO 5660-1: Reaction to fire tests Heat release, smoke production, and mass loss rate
Supports EN 45545-2, ASTM E1354, and other international fire testing protocols
Essential for meeting HL1 to HL3 fire safety levels for railway materials
Why KDM Global?
As a trusted manufacturer of high-precision fire testing equipment, KDM Global offers complete solutions with calibration, maintenance, and technical support. Our cone calorimeter systems are in use across certified laboratories, manufacturing units, and R&D centers globally.
Cone Calorimeter with FTIR -Flammability & Smoke Toxicity Testing Equipment (ISO 5660, 5659-2, NCD 1409) | KDM Global
KDM Global Cone Calorimeter with FTIR is an advanced, multi-functional flammability testing system designed to measure heat release rate, smoke production, and toxic gas emissions. Fully compliant with ISO 5660, ISO 5659-2, and NCD 1409, it offers a complete solution for railway, building materials, plastics, and industrial applications where safety and compliance are critical.
This integrated system combines cone calorimetry and FTIR-based gas analysis in a single platform, enabling accurate fire reaction assessment under controlled heat flux conditions. The unit uses oxygen consumption calorimetry to determine HRR, while real-time FTIR spectroscopy detects gases such as CO, CO HCN, and NO
Standards & Compliance
ISO 5660: Heat release and combustion analysis
ISO 5659-2: Smoke density and optical visibility testing
NCD 1409: Toxic gas analysis with FTIR
EN 45545-2: Railway fire safety compliance (HL1-HL3)
Key Features
Cone heater (up to 100 kW/m) for precise heat flux control
Real-time gas detection with FTIR analyzer
Optical smoke density measurement per ISO 5659-2
Integrated load cell for mass loss rate tracking
Fully automated software with live graphing and data export
Calibrated sampling and exhaust system for repeatable results
Construction materials: Insulation, panels, and flooring
Plastics and polymers: Reaction to fire and gas output
Electrical components: Fire hazard and flammability rating
Why Choose KDM Global?
Our cone calorimeter system with FTIR is engineered for high-accuracy, multi-standard compliance testing. We offer full setup, calibration, and after-sales support to meet your fire testing needs.
Advanced Fire Testing Equipment- Multi-Standard Systems for Railways, Buildings & Electricals
KDM Global provides Advanced Fire Testing Equipment engineered to meet a wide range of international flammability and fire resistance standards. These systems are designed for testing construction materials, railway components, electrical products, polymers, textiles, and more, ensuring compliance with industry regulations across transportation, infrastructure, and manufacturing sectors.
Our multi-standard fire testing setups support various test types including ignitability, heat release, smoke production, toxicity, and surface spread of flame, combining versatility with accuracy and repeatability.
Compliant Fire Testing Standards
EN 45545-2 -Railway fire safety testing (HL1 to HL3 levels)
BS 476 Part 6/7 - Surface spread and fire propagation testing
EN 1363-1 - Fire resistance of building components
ISO 11925-2 / ISO 9239-1 - Flammability of building materials
ISO 5660 / ISO 5659-2 - Cone calorimeter and smoke density analysis
NCD 1409 / FTIR -Toxic gas detection for smoke toxicity
UL 94 / ISO 4589 - Flammability of plastics and oxygen index measurement
System Features
Modular Design - Combine multiple tests in one integrated solution
Cone Calorimeter Compatibility - ISO 5660 compliant with optional FTIR and gas collection
Smoke Density & Visibility Chambers - For EN 45545-2 and ISO 5659-2
Benefits for B2B Buyers
One-stop solution for multi-standard fire testing
Designed for EN, ISO, ASTM, UL, and BS standards
Customizable systems based on industry needs
Reduces testing time and increases lab throughput
Delivered with calibration kits, training, and support
Pair With These KDM Global Systems
Cone Calorimeter with FTIR - ISO 5660 + Toxicity analysis
BS 476 Fire Testing Furnace - Structural fire resistance testing
Smoke Visibility Chamber - EN 45545-2 smoke density testing
ISO 11925-2 Flame Tester - For small flame ignitability
KDM Global stands for reliable, standards-compliant flammability testing equipment backed by expert installation, calibration, and lifetime technical support.
4939 Laboratory Equipments Instruments Suppliers
Short on time? Let Laboratory Equipments Instruments sellers contact you.
