We provide a variety of chemistry equipment that gives you a blast of experience with chemical reactions and their chemistry. So, get ready to understand the magic that happens in your laboratory. We classify our equipment in subcategories which will help you to conduct your experiments smoothly. They are:- Chemistry Glassware Balance Unit Chemistry instrument Chemistry Model Chemistry plasticware Thermometer and Hygrometer.
GZ Lab Sieve adopt well-qualified new type of energy generator generating multi-dimensions high frequency vibration to ensure high-efficient sieving and testing. According to different materials , customers can set different working time by adjusting time controller so that the analysis errors could be reduced to minimum and therefore guarantee analysis results unanimous.
GB 8410(Chinese Standard) Flammability Test to Motor Vehicle CASfire Technical Co.,Ltd have rich experience to provide GB8 410 Flammability of automotive interior materials. GB8410 Scope This Standard specifies the technical requirements and test methods for the horizontal flammability of automotive interior materials. This Standard applies to the assessment of automotive interior materials. As automotive interior parts (positions, layout and application conditions of the parts, ignition sources, etc.) differ considerably from the test conditions specified in this Standard, this Standard does not apply to the assessment of all the actual flammability of automotive interior materials. GB8410 Technical requirementsï¼? The flammability of interior materials must meet the following technical requirement: The burning rate is not greater than 100 mm/min. GB 8410 Test methodï¼? Fit the sample horizontally on a U-shaped support then ignite the free end of the sample on a flame of the specified height in the combustion box. 15 seconds later, determine whether the flame on the sample goes out or at what time it goes out, the burnt distance of the sample, and the time used in burning this distance. GB 8410 - Relative Standard FMVSS 302 Flammability of Interior materials SAE J369: Flammability of Polymeric Interior Materials Horizontal Test Method TL1010: Flammability ISO 3795:Road vehicles, and tractors and machinery for agriculture and forestry -- Determination of burning behaviour of interior materials DIN 75200:Determination of burning behaviour of interior materials in motor vehicles 95/28/EC: The burning behaviour of materials used in the interior construction of certain categories of motor vehiclesâ??, and is intended to ensure that they meet fire safety standards NF P 92-505: Safety against fire - Building materials - Reaction to fire tests - Test used for thermal melting materials - Dripping test. U.T.A.C 18-502 T1: burning behaviour of materials used in the interior construction of certain categories of motor vehicles BMW N 60121.0: BMW standard DBL 5307: Benz Standard GM L-T06-302G-79: GE Standard Mitsubishi ES-X60410: Oxygen Index VW TL 1010: burning behaviour Volvo STD 5031: burning behaviour Web:http://www.casfire.cn E-mail:info@casfire.cn
ASTM E595-15 Outgassing test - Test Standard ASTM E595 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment ASTM E595-15 Outgassing test - Test Requirement CVCM ï¼?collected volatile condensable materialsï¼?â?¤0.1% TML ï¼?total mass lossï¼?â?¤1% WVR ï¼?the amount of water vapor regainedï¼? Outgassing test ASTM E595 - Test Conditions Pre Condition: 73 F/ 50% RH (24Hours) ; Post Condition: 73 F/ 50% RH (24Hours) This test method describes the test apparatus and related operating procedures for evaluating the mass loss of materials being subjected to 125�°C at less than 7*10â??3 Pa for 24 h. The overall mass loss can be classified into noncondensables and condensables. The latter are characterized herein as being capable of condensing on a collector at a temperature of 25�°C. ASTM E595-15 Outgassing test â?? Brief Many types of organic, polymeric, and inorganic materials can be tested. These include polymer potting compounds,foams, elastomers, films, tapes, insulations, shrink tubings, adhesives, coatings, fabrics, tie cords, and lubricants. The materials may be tested in the â??as-receivedâ?? condition or prepared for test by various curing specifications. More about Outgassing test ASTM E595,please contact us : CASfire Technical Co.,Ltd 8F Building 4, Chinese Academy of Science, No.255 South Duiying Road,Jimei, Xiamen 361021, China Tel: (+86) 0592-3500085 MP: (+86) 18906059211 Email: info@casfire.cn Website: http://www.casfire.cn
TB/T 3237 Chinese Fire test standard for railway vehicles - Standard TB/T 3237 Flame retardant technical specification of decorating materials for multiple unit train TB/T 3237 Chinese Fire test standard for railway vehicles â?? Test Method GB 2406 Oxygen index test UIC 564 Combustion test GB 8323 Smoke density test TB 3237 Part 4.4 Smoke toxicity test TB/T 3237 Chinese Fire test standard for railway vehicles â?? Scope This Standard is applicable to the flame retardant decorating materials for the multiple unit train with an operation speed larger than or equal to 200km/h. This Standard specifies the flame retardant property requirements and test methods for the decorating materials for multiple unit train. TB/T 3237 Chinese Fire test standard for railway vehicles â?? Reference Standard GB/T 2406.2 Plastics - Determination of Burning Behavior by Oxygen Index GB/T 10707 Rubber - Determination of the Burning GB/T 8323.2 Determination of Optical Density by a Single-chamber Test UIC 564-2 Regulations relating to fire protection CASfire Technical Co.,Ltd 8F Building 4, Chinese Academy of Science, No.255 South Duiying Road,Jimei, Xiamen 361021, China Tel: (+86) 0592-3500085 MP: (+86) 18906059211 Email: info@casfire.cn Website: http://www.casfire.cn
- Standard TB/T 3237 Flame retardant technical specification of decorating materials for multiple unit train Test Method GB 2406 Oxygen index test UIC 564 Combustion test GB 8323 Smoke density test TB 3237 Part 4.4 Smoke toxicity test Reference Standard GB/T 2406.2 Plastics - Determination of Burning Behavior by Oxygen Index GB/T 10707 Rubber - Determination of the Burning GB/T 8323.2 Determination of Optical Density by a Single-chamber Test UIC 564-2 Regulations relating to fire protection
Export and import of inputs, raw materials, by-products, products, for research and diagnostic laboratories. I sell raw bloo and serum: SFB, blood, sérum of South American camelids, others, plasma, organs, tissues, glands, and relates, botanical plants for medicine, black maca.
COVID19 DIAGNOSTIC RAPID TEST. NO UPFRONT PAYMENTS, SGS INSPECTION IS PERMITED. 80.000 units on stock, price exworks.
Radiographic Testing (RT) is a method of non-destructive testing where many types of manufactured components can be examined to verify the internal structure and integrity of the specimen. Industrial Radiography can be performed utilizing either X-rays or gamma rays. Both are forms of electromagnetic radiation. The difference between various forms of electromagnetic energy is related to the wavelength. X and gamma rays have the shortest wavelength and this property leads to the ability to penetrate, travel through, and exit various materials such as carbon steel and other metals.
Visual testing (VT) is the oldest and most common nondestructive testing (NDT) techniques. It is typically the first step in the examination process to inspect a variety of product forms including castings, forgings, machined components and weld elements, according to the NDT Training & Test Center. Visual inspection is the process of examination and evaluation of systems and components by use of human sensory systems aided only by mechanical enhancements to sensory input such as magnifiers, dental picks, stethoscopes, and the like. The inspection process may be done using such behaviors as looking, listening, feeling, smelling, shaking, and twisting.
Single Test Kit, rapid to detect an antibiotic residues in milk and dairy product by using fluorescent immunochromatography technology. As soon as 7-10 minutes to results.
* Dimension: L* 1500*850mm * Worktop: Phenolic resin/ Epoxy resin/ Ceramic * Frame: C-type/ H-type * Material: 1.0mm cold-rolled steel with epoxy powder * Accessories --PP sink --Solid brass faucet -- Eyewash --Water baffle -- Regent with temper glass layers --Steel service dropper
* Type: Bench mounted * Material: Full steel * Worktop: Phenolic resin/ Epoxy resin/ Ceramic/ PP * Sash: 6mm temper glass * Underneath cabinet: 2 pcs with 1.0mm cold-rolled steel material * Finish: Epoxy resin powder coating * Accessories Switch for 30W lamp and blower Cup sink& Water system Gas system Waterproof sockets 13A/ 16A
* Type: Bench mounted * Material: Full steel * Worktop: Phenolic resin/ Epoxy resin/ Ceramic/ PP * Sash: 6mm temper glass * Underneath cabinet: 2 pcs with 1.0mm cold-rolled steel material * Finish: Epoxy resin powder coating * Accessories Switch for 30W lamp and blower Cup sink& Water system Gas system Waterproof sockets 13A/ 16A
* Type: Bench mounted * Material: Full steel * Worktop: Phenolic resin/ Epoxy resin/ Ceramic/ PP * Sash: 6mm temper glass * Underneath cabinet: 2 pcs with 1.0mm cold-rolled steel material * Finish: Epoxy resin powder coating * Accessories Switch for 30W lamp and blower Cup sink& Water system Gas system Waterproof sockets 13A/ 16A
* Type: Bench mounted * Material: Full steel * Worktop: Phenolic resin/ Epoxy resin/ Ceramic/ PP * Sash: 6mm temper glass * Underneath cabinet: 2 pcs with 1.0mm cold-rolled steel material * Finish: Epoxy resin powder coating * Accessories Switch for 30W lamp and blower Cup sink& Water system Gas system Waterproof sockets 13A/ 16A
* Type: Bench mounted * Material: Full steel * Worktop: Phenolic resin/ Epoxy resin/ Ceramic/ PP * Sash: 6mm temper glass * Underneath cabinet: 2 pcs with 1.0mm cold-rolled steel material * Finish: Epoxy resin powder coating * Accessories Switch for 30W lamp and blower Cup sink& Water system Gas system Waterproof sockets 13A/ 16A
Our 315mm PP Inspection Chambers allow for easy access to the drainage system for maintenance, inspection, rodding and the removal of debris. PP Inspection Chambers are a simple push-fit assembly and have been designed to offer less labour intensive and more economical alternatives to traditional construction methods. The connections to the PP Inspection Chamber are flexible and allow for a deflection of pipe of 3' in all directions. Our chamber will not leak even if there is ground settlement of 50mm. Our PP Inspection Chambers allow for 5 incoming pipes and one outlet. Connections not used can be sealed by plugs provided.
Uses Sample baking, drying and sample digestion test, is a necessary tool for geological, metallurgical, environmental protection, agriculture, grain and cooking oil, forestry, food, medical and health, biochemical and other laboratories, as well as teaching and research. Sample digestion before chemical analysis of soil, feed, plants, seeds, heavy metals, ore. It is an ideal equipment of sample pretreatment for analytical instruments such as AA, ICP, ICP-MS, and atomic fluorescence. It can also be used for preparation and acid steaming treatment of microwave digestion. Main features 1. Stereo surround heating: The design concept of five-sided heating is the real sense of stereo surround heating. 2. High efficiency of rapid digestion: large amount of sample disposal at one time, heating time is short. Compared with the general hole digestion instrument which only relies on the plane heating radiation facade, it can improve the working efficiency by 60%. 3. Digestion uniformity: the bottom of the test tube and 360 degree heating make the sample heating without blind spots, good stability and uniformity. 4. Precise temperature control: PID adjustment, temperature control accuracy (0.1 C). 5. Good thermal insulation performance: high purity alumina Mullite with high quality and environmental protection ensures the minimum heat loss. 6. Corrosion Resistance: The metal shell is coated with special anti-corrosion professional coatings, which are resistant to various corrosive liquids and gases. 7. Easy to use: The apparent temperature is the sample temperature. 8. Safety of use: Multilayer insulation protection, in case of equipment failure, the alarm will be light and sound and stop work immediately.
Uses Sample baking, drying and sample digestion test, is a necessary tool for geological, metallurgical, environmental protection, agriculture, grain and cooking oil, forestry, food, medical and health, biochemical and other laboratories, as well as teaching and research. Sample digestion before chemical analysis of soil, feed, plants, seeds, heavy metals, ore. It is an ideal equipment of sample pretreatment for analytical instruments such as AA, ICP, ICP-MS, and atomic fluorescence. It can also be used for preparation and acid steaming treatment of microwave digestion. Structure Metal frame, anti-corrosion coating, silicon carbide angular beam, high purity alumina (HPA) combined heating plate. Features Convenient operation, fast heating, doesnt expose wires, no open fire, no fire hazards. Insulation protection, safe and reliable. Gradient temperature control, Max. Temperature 500/700 C. Can be used directly or in combination with silicon carbide plate, so that the temperature uniformity, anti-corrosion have achieved better results.
