SCMTRS10-96 10ul 10ul Pipette Tip Short, Rack 96tips/rack, 50racks/ctn 8.1 49.5 28.5 38 10UL SHORT PIPETTE TIP All of the tips made from 100% polypropylene. Tips are designed to fit the most popular pipettors. 3package can be chosen: Bulk, Rack, Refill. 9 capacity for your demands: 10ul Short, 10ul Long, 200ul, 300ml, 1000ul, 1250ul, 5ml Short, 5ml Long, 10ml
-Brand: Labtek -Model Number: L-VTH series -Function: Temperature, humidity, Combined with Vibration -Volume: 500L ~ 2000L -Temperature range:-70 to 180C -Ramp rate: 1C/min,3C/min,5C/min, 10C/min,15C/min, -Humidity range: 20%RH~98%RH, 10%RH~98%RH for optional -More details, check with sales at labtek-inst dot com -Free design of Temperature Humidity Vibration chamber to cooperate with any existing vibration system -Direct design and manufacture in Chinese factory, 1pc free design, customize at most competitive price.
-Brand: Labtek -Model Number: L-FTH series -Function: Temperature, humidity -Volume: From 400L to 50m3 -Temperature range:65C+150C -Ramp rate: 3C/min,5C/min, 10C/min,15C/min, -Humidity range: 20%RH~98%RH, 10%RH~98%RH for optional -More details, check with sales at labtek-inst dot com -Direct design and manufacture in Chinese factory, 1pc free design, customize at most competitive price.
-Brand: Labtek -Mode: LT-TS3 series -Volume: 70L ~ 300L -Thermal shock temperature range:-65°C+150°C -Temp constancy: within ±0.5 deg C -Temp tolerance: ±2.0°C High temperature zone -Pre-heat temp range: 60°C to 180°C -Rate of rise of temp: 60°C to 180°C within 60 min Ambient temperature zone Low Temperature Zone -Pre-cool temp range: -75°C+20°C -Cooling rate: +20°C -75°C Within 95 min -Recovery time: Within 5 min -More details, check with sales at labtek-inst dot com -Direct design and manufacture in Chinese factory, 1pc free design, customize at most competitive price.
-Brand: Labtek -Mode: LT-TS2 series -Volume: 50L ~ 1000L -Thermal shock temperature range:-65+150°C -Temp fluctuation: within ±0.5 deg C -Temp deviation: Within±2.0°C -More details, check with sales at labtek-inst dot com -Direct design and manufacture in Chinese factory, 1set free design, customize at most competitive price.
Model Number: L-HH series Function: Temperature, High humidity Volume: 100L ~ 1500L Temperature range:-70 ~180 °C Ramp rate: 1 °C/min Humidity range: 20%RH~98%RH Main test points: 85%RH @ 85 °C, 90%RH @ 60 °C
Model Number: L-BT series Function: Temperature, humidity Volume: 40L ~ 64L Temperature range:-70 ~180 °C Ramp rate: 1 °C/min Humidity range: 20%RH~98%RH
Disposable Type : Medical Laboratory Instruments Disposable : Yes Grade : Medical Supply Ability : 1000000 Piece Per Day Price And Quantity Price : 170000-250000 INR/Piece Minimum Order Quantity : 01 Piece Product Specifications Disposable YesDisposable Type : Medical Laboratory Instruments Grade : Medical Trade Information Supply Ability : 1000000 Piece Per Day Delivery Time ; 4 - 5 Days Main Export Market(s) : Africa, Middle East, Western Europe, Eastern Europe, South America, North America, Central America, Australia, Asia Main Domestic Market : All India Product Description Medical Laboratory Instruments are the ones used to either perform an experiment or to take measurements and gather data. We source these from our trusted vendors who have been associated with us for long. Medical Laboratory Instruments stand high on quality, durability, effectiveness, low maintenance, easy installation and optimum performance.
VGB-4B OEM OBM Physics Biology Chemistry custom lab lithium battery electrolyte with vacuum chamber Plexiglass glove box
AGB-1A cheap acrylic lab glove box Inert Gas Operation Lithium Battery Biology Aeronautics Mini Glove Box
Senthil chloroscope is a simple, sturdy compact, portable and easy to operate comparator apparatus to estimate the residual chlorine in water.To estimate the residual chlorine in water.Ideally suited for both large and small users of water treated with chlorine. Senthil chloroscope is extensively used in municipal, panchayat and rural water systems, hospitals railways, defence establishments, factories, laboratories, farms, dairies and other field applications. Senthil chloroscope is a simple, sturdy compact, portable and easy to operate comparator apparatus to estimate the residual chlorine in water. Ideally suited for both large and small users of water treated with chlorine. Chloroscope is an instrument used to check the residual chlorine in drinking water. In this test, a chlorinated water sample is taken in a glass tube after the required contact period. To this, a stipulated quantity of chemical reagent is added. The color formed is observed after a few minutes. The formation of yellow color normally indicates the presence of chlorine (either combined or free) in the water. The more yellow the color, the greater is the chlorine residual. The amount of residual chlorine can be ascertained by comparing the colour developed in the glass tube with the standard color film kept in test kit. This test, is therefore, very simple and does not require much technique or time. Senthil chloroscope is extensively used in municipal, panchayat and rural water systems, hospitals railways, defence establishments, factories, laboratories, farms, dairies and other field applications. INSTRUCTIONS: Remove the top lid. Fill the left-side test tube with untreated water and insert it on color disc side. Fill the right-side test tube with the water treated with chlorine solution or tablet. Add 3 or 4 drops of Senthil Reagent (orthotolidine) from the special dropper bottle. Shake well and replace it on the right-side. Close the top cover and view against light. Compare the colour of the water being tested with the standard colour discs. Note the reading of the matching disc. This value indicates the residual chlorine in PPM in the treated water. KEY chlorine test kit,chlorine test kit for drinking water/water chlorine test kit / chlorine test kit for water / chlorine test kit price / ph and chlorine test kit / tap water chlorine test kit chlorine test kiT pool chlorine test kit dayschlorine test kit for drinking water free chlorine test kit fas dpd chlorine test kit drinking water chlorine test kit chlorine test kit aquarium water chlorine test kit pool chlorine test kit instructions residual chlorine test kit
Laboratory Accessories
Laboratory Interiors
Beaker is made up of Boroscillicte Glass3.3 And is transparent in color With Graduation.
DTSL Temperature and Humidity Verification Chamber is used to examine some dedicated devices like hair temperature and humidity indicator(meter),dry and wet blub temperature and humidity meter,digital temperature and humidity meter,temperature and humidity transmitter and so on.The device is accurately measured by the temperature and humidity sensor and controlled by the industrial programmable controller,which can realize the automatic adjustment of the humidity in the temperature and humidity check box.With high control and test accuracy,it provides continuous,reproducible humidity measurement for scientific research and product testing. Product Function HD touch screen high resolution capacitive screen, clear display, multi-touch support, in line with customer touch operation habits Wifi control remote setting of temperature and humidity, starting and stopping equipment, reading current temperature and humidity values and fluctuation status of mobile phone / pad Status Tip Real-time calculation and display of temperature and humidity fluctuation, stable state prompt, U disk insertion detection, wifi connection prompt Curve display temperature and humidity curve real-time display, support touch zoom translation operation, one-click screenshot save curve to U disk Data record temperature and humidity data automatically saved to xls format, one key exported to U disk Timing boot with timing boot function, can achieve the equipment before work timing boot, immediately after work, no need to wait. Multi-point calibration: support temperature and humidity sensor multi-point calibration, temperature sensor indication can be segmented multi-point correction to ensure consistency with the standard device. Segmental control: temperature and humidity are controlled by piecewise PID, fast and stable , zero overshoot, fast and stable humidity from 40 RH to 60 RH only 15 minutes Fan speed regulation: inner cavity main circulation fan, using frequency conversion speed regulation control, through touch screen, set fan speed; Multiple protection alarms: constant temperature tank overheating protection, liquid level alarm; rehydration tank water shortage warning; compressor overheating alarm, start and stop protection function Communication expansion: with network interface, wifi interface, USB interface, RS-232 interface, can communicate with the PC, to achieve data reading, system settings.
Description: Orbital Shaker-Incubator is a compact bench top ShakerIncubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program. Seven interchangeable platforms allow it mix and culture samples in flask, petri dish, tubes, Elisa plates, and etc. Built in microprocessor thermo controller provides constant temperature control in the incubator chamber. It is extremely easy to operate, with very straightforward setup of temperature, speed and time. Features: 1.Instantly display operation information(time, temperature and speed) on the LCD screen. 2.Gentle and reliable shaking with direct brushless DC motor. 3.Running safely �¢??-heating and shaking will be automatically stopped once the lid is open. 4.Seven interchangeable platforms can be chosen for variety demands. 5.Auto restart in case of power failure. 6.Over-heating protection device is included. 7.Built-in temperature calibration function. 8.Compact, only 421mmx320mm(DXW) Parameters: Temperature setting range 0C ~60C Temperature control range RT.+5C ~6C Time range 1min ~ 99h59min/ Temp. accuracy �±0.5C(@37C) Display accuracy 0.1C Temp. uniformity �±0.5C(@37C) Shaking range 50~300rpm Orbit 20mm Platform dimension 230x230mm Internal chamber height 182mm Load capacity 4.0kg Heating time �¢?�¤15min(from 25�?�°C to 60�?�°C) Auto resume to run Yes Power 350W Voltage AC220V/50-60HZ Fuse 250V 3A 20 Dimension(mm) 421x320x338 Weight(kg) 18.5 Optional Platforms Type Description PF-1 Platform with clamps for 5 250ml conical flask PF-2 Platform with clamps for 9 100ml conical flask PF-3 Platform with clamps for 10 50ml tube PF-4 Platform with clamps for 18 15ml tube PF-5 Platform with spring holder PF-6 Platform for 4pcs Elisa plates or deep-well plates PF-7 Flat platform for 5pcs petri dishes
The Strain viewer ( Ref.PSV-202) has been designed to observe and analyze the internal stress of preform and other plastic products . Detecting object 1. Preform ( Color and colorless types ) 2. Other transparent plastic products Plastic molds , plastic bottle , cosmetic bottle , beverage bottle, plastic tray, plastic film ., etc Specifications Analyzer : diameter 100mm Viewing field: 200mm*200mm Measuring height :236mm Overall size: 310*285*350mm Voltage: 24VDC( with a AC/DC adaptor ) Light source: White fluorescent lamp Weight:8KG Measuring Principle The internal stress plastic products has a birefringent characteristic. In other words, if there is stress inside of these types of products, light from he polarized lamp will be divided into different units, which produce optical interference phenomenon(ripple patterns) in turn. Under white-light lamp, you can see aubergine ripples, which is caused by the presence of stress. From the observation of colored patterns, you can see stress distribution directly, then evaluate and improve the annealing process. The inspection of plastic molds is more complex as the colored patterns cased by stress is irregular. A similar situation may occur with glass products, which is called stress stretching. For example, a qualified mold will have a large amount of stress released by tension. The role of full-wave plate : The full-wave plate increases or decreases the full wavelength of a phase difference, thereby forming a colored pattern, which is easier to analyze.
Measuring Principle The internal stress of glass and plastic products has a birefringent characteristic. In other words, if there is stress inside of these types of products, light from he polarized lamp will be divided into different units, which produce optical interference phenomenon(ripple patterns) in turn. Under white-light lamp, you can see aubergine ripples, which is caused by the presence of stress. From the observation of colored patterns, you can see stress distribution directly, then evaluate and improve the annealing process. The inspection of plastic molds is more complex as the colored patterns cased by stress is irregular. A similar situation may occur with glass products, which is called stress stretching. For example, a qualified mold will have a large amount of stress released by tension. The role of full-wave plate : When testing glass samples without the full-wave plate, usually only black or gray shadow patterns can be seen. The full-wave plate increases or decreases the full wavelength of a phase difference, thereby forming a colored pattern, which is easier to analyze.
Function 1.Observe stress distribution in transparent plastic, glass products and optical crystals 2.Measure retardation caused by internal stress in glass and optical crystals Detecting object 1. transparent glass products with complex construction. such as : penicillin bottle, ampoule , mobile phone cover, light tube, light bulb,solar glass ,automobile glass,sapphire, glass container , glass handicraft 2. transparent plastic samples plastic bottle , cosmetic bottle , beverage bottle, contact lenses, plastic tray plastic film 3. optical crystals such as quartz , SiC, calcium fluoride Detecting methods Sensitive Color Method and Senarmont Method Specification Model PSV-413 Size W291 D384 H388mm Measuring range 0-280nm Weight 11Kg Viewing field W200 D200mm Measure height Max259mm Light Source Warm white LED light 10W Power DC 12V(with a AC/ DC adapter) Others: 1.Polarizing light field intensity : 120cd/m2 (10W LED lamp) 2.Polarization degree of the polarizing material: 99% 3.Polarization field: 200*200mm 4.Instrument structure: a 1/4 wave plate in the analyzer and a full-wave plate in the polarizer (wavelength 565nm). Slow axis of the plate is at 90 to the polarization plane .5.A dial on the Analyzer is used to measure the rotating angle (range: 0-180 )
Principle : Polarization interference Specifications : Viewing field: 200* 200 mm Overall size: 300*335*330 mm Main voltage:220 V AC Measuring space height : 234.5 mm Light source: LED ( White and Sodium light) Gross Weight : 10KG Packed in 1 carton : 45*45*32cm Application area This Polariscope is designed to observe and analyze the distribution of internal strain in transparent plastic preforms. It has been widely used in the quality control of various plastic rough processing products and finished bottles. Features 1.Defects invisible to the naked eyes such as crystallization or other common defects become visible ; 2.When the plastic preform is placed on the Polarizer at a 45 angle, the colored birefringent stripes at the edge of the preform can be observed; 3.When the plastic preform is placed on the polarizer at a 0 or 90 angle, black birefringence stripes in the central part of the preform will be displayed; 4. In addition to white light, Sodium light is also used to test colored preforms or finished bottles; 5. Besides , this Strain Viewer provides 12 kinds of defect analysis functions. 12 kinds of colored defect comparison pictures will be attached to instruct related improvements in preform production process.
