PRODUCT: LIQUID HELIUM Manufacture: PAO Gazprom, Russia Physicochemical properties of liquid helium: - helium volume fraction, not less than 99.9999% - nitrogen volume fraction, not more than 0.000045% - oxygen volume fraction in total with argon, not more than 0.000015% - hydrocarbon volume fraction, not more than 0.00001% - neon volume fraction, not more than 0.000015% - hydrogen volume fraction, not more than 0.000005% - water vapor volume fraction, not more than 0.000015% Helium is one of the most sought-after noble gases. Due to its inertness, low boiling point and superfluidity, helium is widely used in high-tech industries, such as the rocket and space, nuclear and electronic industries, as well as in metallurgy . The quality of liquid helium complies with Russian TU and all international standarts, including those in the field of environmental safety. Delivery terms: FOB helium HUB Vladivostok, Russia Quantity: 4.000 - 400.000.000 m3 The price of helium for export, the detaileld procedure, the size of the batch, are discussed with the end buyer or his official representative in the presence of a mandate from the buyer.
All products 100% free of any chemical.
Product name: Coverall type 4B/5B/6B Elasticated hood around face. Elasticated cuffs and ankles. Elasticated sleeves. Taped seams. Zipper with re-sealable flap protecting leakage through seams. Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards. White color with blue tape Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm Lightweight, do not contain rubber/ latex. Antistatic treated on both sides. Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard) Non-sterile Single Use, disposable Size: M-XL Conforms to standards below: European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards. EN 13034:2005+A1 EN 14605 EN ISO 13982-1 EN 1073-2 EN ISO 13688 EN 1149-5 Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by bloodâ??borne pathogens using bacteriophage Phiâ??X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard) Performance requirement ISO standards: EN 340 General requirements EN ISO 17491-4: 2008 (supersedes: EN 468 mod. Spray aerosol test) EN 14325 Test methods & performance classification EN ISO 3758 (ISO 3758) Textile care symbols EN ISO 13935-2 Seam strength
Product name: Coverall type 3B Elasticated hood around face. Elasticated cuffs and ankles. Elasticated sleeves. Taped seams. Zipper with re-sealable flap protecting leakage through seams. Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards. White color with blue tape Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm Lightweight, do not contain rubber/ latex. Antistatic treated on both sides. Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard) Non-sterile Single Use, disposable Size: M-XL Conforms to standards below: European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards. EN 13034:2005+A1 EN 14605 EN ISO 13982-1 EN 1073-2 EN ISO 13688 EN 1149-5 Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by bloodâ??borne pathogens using bacteriophage Phi X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard) Performance requirement ISO standards: EN 340General requirements EN ISO 17491-4: 2008 (supersedes: EN 468 mod. â?? Spray aerosol test) EN 14325 Test methods & performance classification EN ISO 3758 (ISO 3758) Textile care symbols EN ISO 13935-2 Seam strength
General Description: Spray/aerosol-penetration resistant, biohazard-protective coverall, for use in EVD patient-isolation units for infection prevention and control against viral penetration. Technical specifications Product name: Coverall type 4B/5B/6B Elasticated hood around face. Elasticated cuffs and ankles. Elasticated sleeves. Taped seams. Zipper with re-sealable flap protecting leakage through seams. Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards. White color with blue tape Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm Lightweight, do not contain rubber/ latex. Antistatic treated on both sides. Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard) Non-sterile Single Use, disposable Size: M-XL Conforms to standards below: European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards. EN 13034:2005+A1 EN 14605 EN ISO 13982-1 EN 1073-2 EN ISO 13688 EN 1149-5 Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by blood borne pathogens using bacteriophage Phi X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard) Performance requirement ISO standards: EN 340 General requirements EN ISO 17491-4: 2008 (supersedes: EN 468 mod. Spray aerosol test) EN 14325 Test methods & performance classification EN ISO 3758 (ISO 3758) Textile care symbols EN ISO 13935-2 Seam strength Certificates CE from notified body ISO13485 Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling : Individually packaged in a transparent plastic bag. Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type, coverall performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
Medical face masks, 3 and 4 ply medical masks, disposable masks, surgical masks, ffp2 masks, n95, kn95, coverall type 3 4 5 6, isolation gown, shoe cover, head cover, nitrile gloves like cardinals,.Export and import
General Description: Disposable protective shoe covers for chemical and biological protection Technical specifications Product Name : Disposable CPE shoe cover Material : CPE 2.6g/pc machine-made Non-sterile Permeability for air and water vapour Elastic insert (at the ankle level) The ability to retain up to 99% of solid particles larger than 1 micron Material does not form pile and dust Anti-slipping sole Inseam: stitched Size : 36-42 Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling : Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
Furniture, home decor, fabrics, bedding.Export and contract manufacturing
Knitwear and Garments .Exporting and Stitching
Sport goods, clothes, bed sheets and bed clothes.Exporting
Wool.
Non Woven Meltblown Fabrics.
Towels.Transporters
Garments and turkish shoes.
Fruits, garments, medical and surgical instruments.
Leather wear, other fabric garments, raw leather, wet blue skin, crust.Transportation
Saddle Textiles And Horse Equipment.
Cotton yarn.
Wool bellies.
Wool and denim fabric.
