Fresh chilled lamb carcasses, frozen carcasses, live lambs, HALAL standards, organic meat.
Medical Ventilator (Model SH300/PA900B/SH200A/) Ventilation specification Tidal volume l:E Monitoring specification VTI, VTE , MV, MVspn Fspn, Frequency, l:E Ppeak, Pmean ,Pplat, Pmin, PEEP Ã¥·³02 Compliance, Resistance P-T, F-T, V-T, P-V loop, V-F loop 20-2500ml Ventilation mode : VCV, VCV +Sigh, PCV, PRVC, SIMV+VCV, SIMV+PCV, SIMV+PRVC ,SPONT (CPAP/PSV) , BIPAP, APRV NIV/CPAP, NIV/PCV 1:10-10:1 lnspiratorytime: 0.1-12 s Pause time Pressure trigger sensitivity Flow trigger sitivity PEEP/CPAP Psupp Pinsp Phigh Plow 02 suction Ins.Hold Exp.Hold Manual ventilation Waveform Freeze: Yes Nebulization C02(optional) ETC02(optional) Optional Air compressor Humifier Support arm 0-50% (PEEP-20 to OcmH20) 1 - 20LPM 0- 50cmH20 0- 70cmH20 5- 70cmH20 21-100% 0- 70cmH20 1 00% 02 ventilation for 2mins 15s Max 15s Max 0-60 minutes adjustable CE
All products 100% free of any chemical.
PRODUCT: LIQUID HELIUM Manufacture: PAO Gazprom, Russia Physicochemical properties of liquid helium: - helium volume fraction, not less than 99.9999% - nitrogen volume fraction, not more than 0.000045% - oxygen volume fraction in total with argon, not more than 0.000015% - hydrocarbon volume fraction, not more than 0.00001% - neon volume fraction, not more than 0.000015% - hydrogen volume fraction, not more than 0.000005% - water vapor volume fraction, not more than 0.000015% Helium is one of the most sought-after noble gases. Due to its inertness, low boiling point and superfluidity, helium is widely used in high-tech industries, such as the rocket and space, nuclear and electronic industries, as well as in metallurgy . The quality of liquid helium complies with Russian TU and all international standarts, including those in the field of environmental safety. Delivery terms: FOB helium HUB Vladivostok, Russia Quantity: 4.000 - 400.000.000 m3 The price of helium for export, the detaileld procedure, the size of the batch, are discussed with the end buyer or his official representative in the presence of a mandate from the buyer.
General Description: Disposable protective shoe covers for chemical and biological protection Technical specifications Product Name : Disposable CPE shoe cover Material : CPE 2.6g/pc machine-made Non-sterile Permeability for air and water vapour Elastic insert (at the ankle level) The ability to retain up to 99% of solid particles larger than 1 micron Material does not form pile and dust Anti-slipping sole Inseam: stitched Size : 36-42 Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling : Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
Product name: Coverall type 4B/5B/6B Elasticated hood around face. Elasticated cuffs and ankles. Elasticated sleeves. Taped seams. Zipper with re-sealable flap protecting leakage through seams. Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards. White color with blue tape Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm Lightweight, do not contain rubber/ latex. Antistatic treated on both sides. Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard) Non-sterile Single Use, disposable Size: M-XL Conforms to standards below: European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards. EN 13034:2005+A1 EN 14605 EN ISO 13982-1 EN 1073-2 EN ISO 13688 EN 1149-5 Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by bloodâ??borne pathogens using bacteriophage Phiâ??X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard) Performance requirement ISO standards: EN 340 General requirements EN ISO 17491-4: 2008 (supersedes: EN 468 mod. Spray aerosol test) EN 14325 Test methods & performance classification EN ISO 3758 (ISO 3758) Textile care symbols EN ISO 13935-2 Seam strength
Product name: Coverall type 3B Elasticated hood around face. Elasticated cuffs and ankles. Elasticated sleeves. Taped seams. Zipper with re-sealable flap protecting leakage through seams. Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards. White color with blue tape Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm Lightweight, do not contain rubber/ latex. Antistatic treated on both sides. Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard) Non-sterile Single Use, disposable Size: M-XL Conforms to standards below: European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards. EN 13034:2005+A1 EN 14605 EN ISO 13982-1 EN 1073-2 EN ISO 13688 EN 1149-5 Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by bloodâ??borne pathogens using bacteriophage Phi X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard) Performance requirement ISO standards: EN 340General requirements EN ISO 17491-4: 2008 (supersedes: EN 468 mod. â?? Spray aerosol test) EN 14325 Test methods & performance classification EN ISO 3758 (ISO 3758) Textile care symbols EN ISO 13935-2 Seam strength
General Description: Spray/aerosol-penetration resistant, biohazard-protective coverall, for use in EVD patient-isolation units for infection prevention and control against viral penetration. Technical specifications Product name: Coverall type 4B/5B/6B Elasticated hood around face. Elasticated cuffs and ankles. Elasticated sleeves. Taped seams. Zipper with re-sealable flap protecting leakage through seams. Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards. White color with blue tape Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm Lightweight, do not contain rubber/ latex. Antistatic treated on both sides. Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard) Non-sterile Single Use, disposable Size: M-XL Conforms to standards below: European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards. EN 13034:2005+A1 EN 14605 EN ISO 13982-1 EN 1073-2 EN ISO 13688 EN 1149-5 Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by blood borne pathogens using bacteriophage Phi X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard) Performance requirement ISO standards: EN 340 General requirements EN ISO 17491-4: 2008 (supersedes: EN 468 mod. Spray aerosol test) EN 14325 Test methods & performance classification EN ISO 3758 (ISO 3758) Textile care symbols EN ISO 13935-2 Seam strength Certificates CE from notified body ISO13485 Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling : Individually packaged in a transparent plastic bag. Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type, coverall performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
Walnut oil, biting almond oil.
Meat beef, Lamb (halal).
Kindle beans, fish.Transportation
Face Mask 3 Ply, Surgical Mask, Kn95, N95, Latex Gloves, Medical Overalls, Mechanical Ventilation.
Leather wear, other fabric garments, raw leather, wet blue skin, crust.Transportation
we would like to offer you to expand your product range with 100% Pure Mountain honey with private labeling. What are main features of Kyrgyz Honey? - Honey collects in a mountain area in altitude of 900-4500 meters above sea level, where is no air pollution - Not mixed with other varieties, flavors and additives - Contains unique herbs Our product range: - Natural honey-white (premium class) - Natural honey-mountain - Natural honey-dark For more information, please do not hesitate to contact me at +996 555 48 08 78(What''s App) or by mail.
Wood, metals.Shipping
Knowing traditions, we protect quality Offer. Jsc maral this oldest tanning and fur enterprise which is engaged in processing of all types of tanning and fur raw materials, including a semi-finished product to wet-blue. Our partners in delivery of a tanned semi-finished product - the usa, italy, south korea, the people's republic of china, turkey, pakistan, india and other countries, the total absence of claims on quality of processing is characteristic. Today delivery price of "wet-blue": From krs (cattle) raw materials on weight: - from 13 to 17 kg at the price of $27, 5 for 1 piece; - from 17 kg to 22 kg at the price of $34 for 1 piece; The area of one semi-finished product is from 22.6 s/f to 28 s/f and above, depending on weight. Price of one foot-1.21 $ Processing power is 3 000 pieces to vet-bl of krs (cattle). Skin thickness 2.6 3.0 mm. Preferably to footwear and furniture Of the skins with percentage (a 20%, b 50 % c 30 %) From materials (sheepskin) we can deliver 18 20 thousand pieces vet-blue in the first month. In the next months up to 40 thousand pieces of "wet-blue" from sheepskin. The average area of "wet-blue" is of sheepskin from 4.8s/f to 6s/f. . Price of one foot-0.6 $ Skin thickness 0.8 1.2 mm., To use for footwear and clothes The price of "wet-blue" of sheepskin is $2.8-3 piece. Of the skins with percentage (a 50%, b 30 % c 20 %) All goods are packed in cellophane. Shipment at own expense. We provide all necessary documents for shipment.
Furniture, home decor, fabrics, bedding.Export and contract manufacturing
Collected in the flowering phase, dried and threshed grass of wild shrub thyme creeping (thyme) - Thymus serpyllum L Uniqueness of our products is that the land plots of our member farmers of cooperative are located in the ideal region for cultivation of organic products. Mountain air, features of climatic conditions of the Issyk Kul oblast enable to grow various kinds of ecologically pure crop production and medical herbs with the high content of biologically active substances. Laboratory analyses of the medical herbs, which are grown by the ACSC Issyk-Kul Organic show that the content of extract of herbs is exceeded by 130% in comparison with herbs from other countries and the content of chemicals in herbs is z
Organic dried valerian roots - valeriana officinalis The rhizomes collected in autumn or in the early spring, exempted from the remains of leaves and stalks, washed from the soil and dried up with roots of the perennial wild-growing and cultivated grassy plant of a valerian medicinal â?? valeriana officinalis l. S. L., family of. Valerian â?? valerianaceae. Uniqueness of our products is that the land plots of our member farmers of cooperative are located in the ideal region for cultivation of organic products. Mountain air, features of climatic conditions of the issyk kul oblast enable to grow various kinds of ecologically pure crop production and medical herbs with the high content of biologically active substances. Laboratory analyses of the medical herbs, which are grown by the acsc yssyk-kol organic show that the content of extract of herbs is exceeded by 130% in comparison with herbs from other countries and the content of chemicals in herbs is 0%. z
Collected at the beginning of the blossoming of tubular flowers and dried flower baskets of cultivated annual herbaceous plant marigold medicinal (calendula officinalis) -Calendula officinalis L., c. Of astroids - Asteraceae. Uniqueness of our products is that the land plots of our member farmers of cooperative are located in the ideal region for cultivation of organic products. Mountain air, features of climatic conditions of the Issyk Kul oblast enable to grow various kinds of ecologically pure crop production and medical herbs with the high content of biologically active substances. Laboratory analyses of the medical herbs, which are grown by the ACSC Issyk-Kul Organic show that the content of extract of herbs is exceeded by 130% in comparison with herbs from other countries and the content of chemicals in herbs is 0%. z
