Good day! We are ready to supply EN590, Jet-A1. FOB Rotterdam/Fujairah. EN 590 100k, upgradable to 300 Jet A1 from 2 million barrels. We are the direct titleholders of the documents.
D2 is a refinery abbreviation for Gasoil. It is the second distillate from the crude oil, and can be used without reformers and additives Specifications for Gasoil D2 L-0.02/62 / GOST 305-82 COMPONENT UNIT MIN MAX Density at 20C Kg / m�³ 0.870 Colour 2.0 Flash point, PMCC Deg C (�°C) 57 62 Kinematic viscosity at 20C C ST 3.0 6.0 Pour point Deg C (�°C) (*) -10.0 Cloud point Deg C (�°C) (*) -5.0 Mercaptan sulphur 0.01 Acidity, mg / 1000 cm�³ 5 Iodine number g/100g 6 Ash %wt 0.01 Total Sulphur %wt 0.02 0.05 Copper corrosion 3hrsat50 deg C (typical) 1 A CCR on 10% Residues %wt 0.02 Cetane index 45 Distillation range : - 50% Recovered Volume deg C (�°C) 280 - 90% Recovered Volume deg C (�°C 360 Bacteria MBC Fibre / it 500 - Bacteria CFU Fibre / it 1000 (*) Summer from March to October (PP 5.0 degrees C) Summer from March to October (CP 0.0 degrees C) Winter from November to February (PP 10.0 degrees C) Winter from November to February (CP 5.0 degrees C)
EN 590 is the current standard for all automotive diesel fuel sold in the European Union member states and other European countries. This grade of fuel is also called ultra-low sulphur diesel (ULSD) Parameter Unit Minimum Maximum Typical Appearance Clear & bright, Cherry Red, Free from visible sediment. Pass Density at 15°C kg/m³ 0.820 0.860 Kinematic viscosity at 40°C mm²/s 1.5 5.5 3.0 Carbon residue (Ramsbottom on 10% residue) % (m/m) 0.30 0.10 Distillation recovery at 250°C % (v/v) 65 42 Distillation recovery at 350C % (v/v) 85 92 Flash point (PMCC) °C 56 >62 Water content mg/kg 200
Diesel.Trade agent
Diesel En590 10ppm.
Diesel En590, Jet A1.
Diesel en 590 10ppm, jet a1.
General Description: Disposable cap for medical facilities. Technical specifications Product Name : Disposable pp mob cap Material : PP 9-10 GSM/pc machine-made presence of elastic for fixing water resistant air permeability Non-sterile Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling : Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
General Description: Disposable protective shoe covers for chemical and biological protection Technical specifications Product Name : Disposable CPE shoe cover Material : CPE 2.6g/pc machine-made Non-sterile Permeability for air and water vapour Elastic insert (at the ankle level) The ability to retain up to 99% of solid particles larger than 1 micron Material does not form pile and dust Anti-slipping sole Inseam: stitched Size : 36-42 Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling : Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
General Description: Type IIR surgical mask to fully protect the working environment, reduce the risk of infection and protect the respiratory system from potentially contaminated fluids. Technical specifications Product Name: 3PLY Surgical mask type IIR Material: 3-layer non-woven melt-blown fabric Bacteria Filtration level: > 98% Size : 17x9,5 cm; flat style Adjustable nose clip elastic earloops Colour: blue Non-sterile Single use, disposable Splash resistance Medical mask bioburden: 30 CFU/gm Surgical mask conforms to standards: EN14683. The disposable mask box should be marked with the manufacturer's name, EN14683 and CE marking. Surgical mask Certificate CE Registration : ISO13485 Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling: Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
General Description: Spray/aerosol-penetration resistant, biohazard-protective coverall, for use in EVD patient-isolation units for infection prevention and control against viral penetration. Technical specifications Product name: Coverall type 4B/5B/6B Elasticated hood around face. Elasticated cuffs and ankles. Elasticated sleeves. Taped seams. Zipper with re-sealable flap protecting leakage through seams. Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards. White color with blue tape Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm Lightweight, do not contain rubber/ latex. Antistatic treated on both sides. Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard) Non-sterile Single Use, disposable Size: M-XL Conforms to standards below: European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards. EN 13034:2005+A1 EN 14605 EN ISO 13982-1 EN 1073-2 EN ISO 13688 EN 1149-5 Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by blood borne pathogens using bacteriophage Phi X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard) Performance requirement ISO standards: EN 340 General requirements EN ISO 17491-4: 2008 (supersedes: EN 468 mod. Spray aerosol test) EN 14325 Test methods & performance classification EN ISO 3758 (ISO 3758) Textile care symbols EN ISO 13935-2 Seam strength Certificates CE from notified body ISO13485 Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling : Individually packaged in a transparent plastic bag. Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type, coverall performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
General Description: The disposable dressing gown is intended for use in medical institutions during procedures and examination of patients. The assortment includes disposable gowns with a sleeve on an elastic band on buttons or velcro and procedural gowns with a sleeve on a cuff on buttons or Velcro. Technical specifications Product Name : EU certified Isolation Gown Material : PP+PE 42 GSM (Tolerance / + 2gms) Fluid proof fabric Serged sewn seams long sleeves with elastic cuff Back length : 120-140 cm Non-sterile Sizes : M-XL blue color Packaging : 10 pcs per inner bag. 100 pcs per carton Execution standard EN13688 and EN14126 test report by SGS Certificates CE from notified body(SGS) ISO13485 Product Measurements A: Length 120 - / + 3cm B: Width in whole 140 - / + 3cm C: Length of sleeves 59 - / + 2cm D: Depth of sleeves 27 - / + 2cm E: Width of shoulder 22 - / + 2cm F: Length of neck tie 35 -/ + 2cm G: Length of waist tie 180 - / + 5cm Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling : Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
General Description: Non-fluid resistant respirator mask protecting against airborne pathogens. Anti-penetration high filtration mask Technical specifications Product Name: FFP2 Respirator with harness band Material : 4-layer non-woven melt-blown fabric Bacteria Filtration level: > 94 % Air permeability: > 2 mm H2O Shape : foldable without valve Fits most face shapes, without inspiration/expiration air-leakage Adjustable nose bridge strip (4 x 90 mm (w x l) (+/-10%)) Elastic ear straps, both fitting around the ears or optional fitting around the top of the head with support of harness band(included). white colour Non-sterile Single-use, disposable Each mask bares clear identification of (i) protection provided FFP2, (ii) which side to wear up (nose), (iii) manufacturer's name, and (iv) model reference Conforms to standards: EN 149: 2001/FFP2. The disposable respirator should be marked with the manufacturer's name, EN 149: 2001/FFP2 and CE certification number. Certificate CE from notified body ISO13485 Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions: As indicated by supplier Packaging and labelling: Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
Product name: Coverall type 4B/5B/6B Elasticated hood around face. Elasticated cuffs and ankles. Elasticated sleeves. Taped seams. Zipper with re-sealable flap protecting leakage through seams. Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards. White color with blue tape Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm Lightweight, do not contain rubber/ latex. Antistatic treated on both sides. Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard) Non-sterile Single Use, disposable Size: M-XL Conforms to standards below: European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards. EN 13034:2005+A1 EN 14605 EN ISO 13982-1 EN 1073-2 EN ISO 13688 EN 1149-5 Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by bloodâ??borne pathogens using bacteriophage Phiâ??X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard) Performance requirement ISO standards: EN 340 General requirements EN ISO 17491-4: 2008 (supersedes: EN 468 mod. Spray aerosol test) EN 14325 Test methods & performance classification EN ISO 3758 (ISO 3758) Textile care symbols EN ISO 13935-2 Seam strength
Solar grade wafers.
En590 diesel fuel oil [50 ppm / 10 ppm] diesel d2 oil gost 305 82 pet coke light cycle oil [lco] mazut 100 gost 10585 75 bitumen grade 40/50, 60/70 and 80/100 jet fuel [aviation turbine fuel] eastern siberian pacific ocean crude [espo] base oil sn 150 jet fuel [a1] liquidified natural gas [lng] gost 5542 87 liquidified petroleum gas [lpg] gost 20448 90 urea 46% nitogen prilled / granular gasoline 89 92 octane automotive gas oil [ago] cst 280 and 380 fuel oil cst 180 fuel oil gasoline 93 95 octane rebco gost 9965 76 virgin fuel oil.
Fmcg items.International procurement
Disposable nappies.Trading
Baby clothes like rompers, jeans.Ships
