General Description: Disposable protective shoe covers for chemical and biological protection Technical specifications Product Name : Disposable CPE shoe cover Material : CPE 2.6g/pc machine-made Non-sterile Permeability for air and water vapour Elastic insert (at the ankle level) The ability to retain up to 99% of solid particles larger than 1 micron Material does not form pile and dust Anti-slipping sole Inseam: stitched Size : 36-42 Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling : Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
General Description: The disposable dressing gown is intended for use in medical institutions during procedures and examination of patients. The assortment includes disposable gowns with a sleeve on an elastic band on buttons or velcro and procedural gowns with a sleeve on a cuff on buttons or Velcro. Technical specifications Product Name : EU certified Isolation Gown Material : PP+PE 42 GSM (Tolerance / + 2gms) Fluid proof fabric Serged sewn seams long sleeves with elastic cuff Back length : 120-140 cm Non-sterile Sizes : M-XL blue color Packaging : 10 pcs per inner bag. 100 pcs per carton Execution standard EN13688 and EN14126 test report by SGS Certificates CE from notified body(SGS) ISO13485 Product Measurements A: Length 120 - / + 3cm B: Width in whole 140 - / + 3cm C: Length of sleeves 59 - / + 2cm D: Depth of sleeves 27 - / + 2cm E: Width of shoulder 22 - / + 2cm F: Length of neck tie 35 -/ + 2cm G: Length of waist tie 180 - / + 5cm Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling : Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
Medical face masks, 3 and 4 ply medical masks, disposable masks, surgical masks, ffp2 masks, n95, kn95, coverall type 3 4 5 6, isolation gown, shoe cover, head cover, nitrile gloves like cardinals,.Export and import
General Description: Non-fluid resistant respirator mask protecting against airborne pathogens. Anti-penetration high filtration mask Technical specifications Product Name: FFP2 Respirator with harness band Material : 4-layer non-woven melt-blown fabric Bacteria Filtration level: > 94 % Air permeability: > 2 mm H2O Shape : foldable without valve Fits most face shapes, without inspiration/expiration air-leakage Adjustable nose bridge strip (4 x 90 mm (w x l) (+/-10%)) Elastic ear straps, both fitting around the ears or optional fitting around the top of the head with support of harness band(included). white colour Non-sterile Single-use, disposable Each mask bares clear identification of (i) protection provided FFP2, (ii) which side to wear up (nose), (iii) manufacturer's name, and (iv) model reference Conforms to standards: EN 149: 2001/FFP2. The disposable respirator should be marked with the manufacturer's name, EN 149: 2001/FFP2 and CE certification number. Certificate CE from notified body ISO13485 Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions: As indicated by supplier Packaging and labelling: Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
Model No. & Name - FFP2 WITHOUT Valve Non-Sterile Material - EARLOOP TYPE 5 PLY BFE 95% White Color a . FOB Shanghai Price USD/pc - US$1.000 Estimate CIF by Air Price USD/pc - US$1.000 Order Quantity - 50,000 Pcs b . FOB Shanghai Price - US$0.545 USD/pc Estimate CIF by Air Price - US$0.996 USD/pc" Order Quantity - 100,000 Pcs c . FOB Shanghai Price - US$0.535 USD/pc Estimate CIF by Air Price - US$0.991 USD/pc Order Quantity - 200,000 Pcs d . FOB Shanghai Price - US$0.525 USD/pc Estimate CIF by Air Price - US$0.982 USD/pc Order Quantity - 500,000 e . FOB Shanghai Price - US$0.500 USD/pc Estimate CIF by Air Price - US$0.975 USD/pc" Order Quantity - 1,000,000 Pcs Packing - 400pcs/carton G.W:16kg/carton Ctn size(cm) - 55*50*29 Payment Term - 50% T/T in advance,50% before shippment, LC, can be negotiated Vaildity of price - 3 month Delivery Time - 5 - 15 Business Days Depends on the Order
Product name: Coverall type 3B Elasticated hood around face. Elasticated cuffs and ankles. Elasticated sleeves. Taped seams. Zipper with re-sealable flap protecting leakage through seams. Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards. White color with blue tape Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm Lightweight, do not contain rubber/ latex. Antistatic treated on both sides. Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard) Non-sterile Single Use, disposable Size: M-XL Conforms to standards below: European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards. EN 13034:2005+A1 EN 14605 EN ISO 13982-1 EN 1073-2 EN ISO 13688 EN 1149-5 Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by bloodâ??borne pathogens using bacteriophage Phi X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard) Performance requirement ISO standards: EN 340General requirements EN ISO 17491-4: 2008 (supersedes: EN 468 mod. â?? Spray aerosol test) EN 14325 Test methods & performance classification EN ISO 3758 (ISO 3758) Textile care symbols EN ISO 13935-2 Seam strength
Medical Ventilator (Model SH300/PA900B/SH200A/) Ventilation specification Tidal volume l:E Monitoring specification VTI, VTE , MV, MVspn Fspn, Frequency, l:E Ppeak, Pmean ,Pplat, Pmin, PEEP Ã¥·³02 Compliance, Resistance P-T, F-T, V-T, P-V loop, V-F loop 20-2500ml Ventilation mode : VCV, VCV +Sigh, PCV, PRVC, SIMV+VCV, SIMV+PCV, SIMV+PRVC ,SPONT (CPAP/PSV) , BIPAP, APRV NIV/CPAP, NIV/PCV 1:10-10:1 lnspiratorytime: 0.1-12 s Pause time Pressure trigger sensitivity Flow trigger sitivity PEEP/CPAP Psupp Pinsp Phigh Plow 02 suction Ins.Hold Exp.Hold Manual ventilation Waveform Freeze: Yes Nebulization C02(optional) ETC02(optional) Optional Air compressor Humifier Support arm 0-50% (PEEP-20 to OcmH20) 1 - 20LPM 0- 50cmH20 0- 70cmH20 5- 70cmH20 21-100% 0- 70cmH20 1 00% 02 ventilation for 2mins 15s Max 15s Max 0-60 minutes adjustable CE
Specifications: Sl.No Parameters Guaranteed Limit (1) Total Moisture < 5% (2) Proximate analysis Volatile matter 9- 12% Ash 4-6% Inherent moisture < 2 % (3) Ash Fusion temperature Initial deformation temperature Deg. Celcius min. 1200 Hemispherical temperature Deg. Celcius min. 1340 Flow temperature Deg. Celcius min. 1360 (4) Gross Calorific Value Kcal/kg 7850-8200 (5) Hard Grove Grindability Index (HGI) 76 (6) Sulphur 0.2 to 0.5 (7) Oxygen 1.86% (8) Phosphorus 0.05-0.1 (9) Alkali (K2O+Na2O) As on Ash basis 0.42% & 0.88% (10) Size 30 to 80 mm (+) 80 mm (+) 100 mm (11) Fixed carbon 82-88%. 5000 MT to 15000 MT.
Face mask, noncontact thermometers, kn95.Brokers
Lug-type specification: 17.5cmx9.5cm, composed of the mask body +nose clip+mask belt . Storage conditions: Packaging stored in relative humidity less than 80%, a cool, dry and ventilated indoor epoxy ethane residues.no corrosive gas . take mask the elastic hanging above the ear respectively, on both sides of the nose clips will aim at the nose, with hand pinched nose clip molding, folding, and then open mask debugging till to plug the nose mouth, this mask is a disposable product, replace one after wearing 4 hours, and discard it after use.
tem name:Disposable KN95 Masks Style:pp nonwoven, soft cotton, melt blown filter Material: 1st layer:pp 20g 2nd layer:20-25g 3rd layer:PP 20g/ES20g Color:white stand: BFE :99%,PFE :99%, Polypropylene inner and outer facing assures comfortable on the inside and protection on the outside Function:anti-coronavirus / prevent flu / anti smoke / dust Remark suitable for medical person or related personnel, protect against respiratory diseases transmitted in the air.The main functions are as follows: 1. The filtration level of the product for non oil particles is level 1, Greater than or equal to 95%; 2. Suction resistance shall not exceed 343.2pa; 3. The water level on the external surface shall not be lower than level 3; 4. According to the specified experimental method, meet the requirements of microbial indicators; 5. The materials used are not inflammable;
Coal wholesale form Kyrgyz Republic (Central Asia). High quality coal, 6500-7000 kKal/kg. If you order, we provide transportation to Batumi port, Georgia. Additionally we have Anthracite Coal. Packed in Bigbags 1 ton.
N95 mask.
Good day! We are ready to supply EN590, Jet-A1. FOB Rotterdam/Fujairah. EN 590 100k, upgradable to 300 Jet A1 from 2 million barrels. We are the direct titleholders of the documents.
Medical Equipment.
Diesel.Trade agent
Thermal and Steam Coal.
Rapid test: covid 19 rapid test kit, malaria p.f/p.v antigen detection test, syphilis/tp diagnostic test kits, one step urine pregnancy test, igg/igm dengue test kit.
Coal.
Consumables for cardiology, cardiac surgery, urology, contrast agents etc. .
