Nairobi Steel Fasteners Suppliers and Manufacturers

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire. Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom.[1][2][4] Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.[3] Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on â??Iron Concentrate Particlesâ?? will summarize the progress achieved in the last five years.

Our iron ore pellets and fines are made from magnetite and have high iron ore content â?? pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines. Using pellets instead of sinter (slightly larger pieces of iron ore) in customersâ?? pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customersâ?? ironmaking processes.

HMS Scrap /Heavy Melting Scrap (HMS1 / HMS2) /HMS1 HMS 1&2 Shredded HMS Bundle Steel Scrap Backed by huge industry knowledge, we are presenting a supreme quality range of HMS Scrap (1 & 2) to our highly valued consumers. These range of HMS Scrap are highly acclaimed for its high durability, tensile strength and exhibits superior resistant to adverse conditions. We test each and every product before release by various industrial parameters by our quality analyst. Client purchase these at reasonable rate. HMS 1/2 SCRAP / METAL SCRAP / HEAVY STEEL SCRAP / /Heavy Melting Steel Scrap Metals for sale. We can supply you HMS scraps, HMS 1, HMS 1/2, Used rails scraps. Chemical Composition: C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% We have Used Rails | HMS 1:2 ISRI CODE R50-R65 Composition C - 0.54-0.82%, SI - 0.18-0.40%, MN - 0.60-1.05%, S - 0.04% maximum P - 0.035% maximum AS: - 0.01% Maximum of Mass Share HMS is usually traded as a blend of 1 & 2, either a premium blend (80:20) or lower grade mixes (70:30) and (60:40). C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% Used clean rail, without slag, dross, trash, wood, plastic, oily parts, grease, alloy, prohibited goods, whole sets of machine and usable parts for machines, cast iron, motor turning blocks, engine blocks, war and explosive for armour plated materials, mud or wastes and maximum harmless impurities is less than 0.1%;