Nairobi Iron Alloy Suppliers and Manufacturers

Our iron ore pellets and fines are made from magnetite and have high iron ore content pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines. Using pellets instead of sinter (slightly larger pieces of iron ore) in customers pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customers ironmaking processes.

Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on Iron Concentrate Particles will summarize the progress achieved in the last five years.

Used Rails R50 - R65 Chemical Composition Used Rails; C: 0, 54 - 0,82 Si: 0,18-0,40 Mn: 0, 60-1, 05 S: 0.04 max P: 0,035 max As.: 0, 01 max of Mass share Norms: R-50 GOST7173-75 and R-65 GOST-8165-75 The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m) Used Rail ISRI 27-29 ISRI-CODES; (27) Rail, Steel No.

REFINED SUNFLOWER OIL SPECIFICATIONSREFINED SUNFLOWER OIL SPECIFICATIONSPHYSICAL PROPERTIES Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Refractive index: 1.465-1.475 at 40 deg. C Density: 0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste: Excellent Odor: None - not sensed CHEMICAL SPECIFICATIONS %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value: 190.32 koh/g. Of oil Iodine value: 134.13 (wijs-hanus method) Peroxide: 0.2 meq/KG. Of oil % soap: 0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids): 8-12 % unsaturated fat(-ty acids): 87-91 Feeding energy: 900kcal Iron: < 0.02 mg/lt FATTY ACID COMPOSITION C14:0: 0.06 C16:0: 5.77 C18:0: 4.1 C18:1: 27.3 C18:2: 59.2 C20:0: 0.27 C18:3: 0.25

Model Number Electric Motor Scrap Grade HMS Material Electric Motor Type Electronic Shape Lump Product name Used Electric Motor Scrap Material All Kinds of Electric Motor Al Content (%) 99% Copper Per Motor 2 - 3 Kg per piece Size 5kg to 25kg Alloy Or Not Non-alloy Application Corrosion Resistance Features High Tensile Strength Quality Clean Condition Working/ Non Working

Our sunflower oil are selected light yellow seeds, light flavor and aroma, perfectly suited to today, especially suitable for use in cold sauces and seasonings, making it ideal for light diet consumption, healthy and balanced. REFINED SUNFLOWER OIL SPECIFICATIONSREFINED SUNFLOWER OIL SPECIFICATIONSPHYSICAL PROPERTIES Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Color: Max.1.2 red, Lovibond tintometer 5/20 inch Refractive index: 1.465-1.475 at 40 deg. C Density: 0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste: Excellent Odor: None - not sensed CHEMICAL SPECIFICATIONS %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value: 190.32 koh/g. Of oil Iodine value: 134.13 (wijs-hanus method) Peroxide: 0.2 meq/KG. Of oil % soap: 0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids): 8-12 % unsaturated fat(-ty acids): 87-91 Feeding energy: 900kcal Iron: < 0.02 mg/lt FATTY ACID COMPOSITION C14:0: 0.06 C16:0: 5.77 C18:0: 4.1 C18:1: 27.3 C18:2: 59.2 C20:0: 0.27 C18:3: 0.25 Types of Oil available: -Refined Corn Oil -Refined Sunflower Oil -Refined Soybean Oil -Refined Canola Oil -Refined Cottonseed Oil -Refined Peanut Oil

Olive oil is a liquid fat obtained by pressing whole olives, the fruit of Olea europaea, a traditional tree crop of the Mediterranean Basin, and extracting the oil. It is commonly used in cooking, for frying foods or as a salad dressing. Our sunflower oil are selected light yellow seeds, light flavor and aroma, perfectly suited to today, especially suitable for use in cold sauces and seasonings, making it ideal for light diet consumption, healthy and balanced. REFINED SUNFLOWER OIL SPECIFICATIONSREFINED SUNFLOWER OIL SPECIFICATIONSPHYSICAL PROPERTIES Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Color: Max.1.2 red, Lovibond tintometer 5/20 inch Refractive index: 1.465-1.475 at 40 deg. C Density: 0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste: Excellent Odor: None - not sensed CHEMICAL SPECIFICATIONS %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value: 190.32 koh/g. Of oil Iodine value: 134.13 (wijs-hanus method) Peroxide: 0.2 meq/KG. Of oil % soap: 0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids): 8-12 % unsaturated fat(-ty acids): 87-91 Feeding energy: 900kcal Iron: < 0.02 mg/lt FATTY ACID COMPOSITION C14:0: 0.06 C16:0: 5.77 C18:0: 4.1 C18:1: 27.3 C18:2: 59.2 C20:0: 0.27 C18:3: 0.25 Types of Oil available: -Refined Corn Oil -Refined Sunflower Oil -Refined Soybean Oil -Refined Canola Oil -Refined Cottonseed Oil -Refined Peanut Oil