We propose very high quality kaolin from Ukraine. This type of kaolin is widely used for production of: cement, high quality refractory products, ceramics, bricks, catalysts as well as medical and cosmetic products etc. Chemical composition: Al2O3 from 36 to 44% Fe2O3 from 1.2 to 1.8% SiO2 from 42.6 to 70.2% SO2 from 0.04 to 0.15% TiO2 from 0.13 to 1% MgO from 0.04 to 0.41% CaO from 0.003 to 0.024%. Fraction size is from 100 to 200 mm. Kaolin in bulk. Large amounts
Kaolin Used in ceramics, paper and paint application , will supply in both lumps and powder form' Product origin : India Minimum Order Size and Packgaing details : 25-10000Tons
Al2O3 47%min Fe2O3 1%max TIO2 1.6%max K2O+NA2O 0.5%max Bulk density 2.50G/CM3 min Mullite phase 65 typical
Kaolinite is a clay mineral, part of the group of industrial minerals with the chemical composition Al2Si2O5(OH)4. It is a layered silicate mineral, with one tetrahedral sheet of silica linked through oxygen atoms to one octahedral sheet of alumina octahedra. White, sometimes red, blue or brown tints from impurities
Kaolin also called china clay, is an industrial clay mineral, which is generally used for its whiteness along with other properties. It is an essential ingredient in the manufacturing of porcelain, white-wares, paper, paint, and different types of tiles. Hariom Minechem offer more than 8 grades of kaolin, which is extracted from 3 different mining locations in India. On the other hand, Hariom Minechem also has a range of imported kaolins from various sources around the globe. The company is also the only authorised of the famous Iran China Clay company. We give immense attention to the quality of production of kaolin, in order to remove impurities and preserve its qualities, for which it is used for. Following characteristics can be found in our kaolin: Exceptional fired whiteness High casting rate Good unfired strength Low residue Feel Free to contact us for best quote.
Type : 1: MKN : 13,76 % - TCVN7131-02 2: SiO2 : 47,38% - GKF -10A analytic Machine 3: Al2O3 : 37,27% - GKF -10A analytic Machine 4: Fe2O3 : 0,45% - GKF -10A analytic Machine 5: TiO2 : 0,01% - GKF -10A analytic Machine 6: CaO : 0,11 % - GKF -10A analytic Machine 7: MgO : 0,05% - GKF -10A analytic Machine 8: K2O : 0,76% - GKF -10A analytic Machine 9: Na2O : 0,08% - GKF -10A analytic Machine
kaolin, also called china clay, soft white clay that is an essential ingredient in the manufacture of china and porcelain and is widely used in the making of paper, rubber, paint, and many other products. In its natural state kaolin is a white, soft powder consisting principally of the mineral kaolinite, which, under the electron microscope, is seen to consist of roughly hexagonal, platy crystals ranging in size from about 0.1 micrometers to 10 micrometers or even larger. These crystals may take vermicular and booklike forms, and occasionally macroscopic forms approaching millimeter size are found. Kaolin as found in nature usually contains varying amounts of other minerals such as muscovite, quartz, feldspar, and anatase. In addition, crude kaolin is frequently stained yellow by iron hydroxide pigments. It is often necessary to bleach the clay chemically to remove the iron pigment and to wash it with water to remove the other minerals in order to prepare kaolin for commercial use. When kaolin is mixed with water in the range of 20 to 35 percent, it becomes plastic (i.e., it can be molded under pressure), and the shape is retained after the pressure is removed. With larger percentages of water, the kaolin forms a slurry or watery suspension.
Message: We have a large deposit of good quality Raw or Refined kaolin for sale, at extremely competitive prices. We can supply up to 30,000 tons per month. We have enormous reserves, so there is no problem with supply. Our prices are based on container sales only. We are based in Malaysia. Please email me if you are interested, or have any questions.
Product description, Product introduction: Kaolin is White or light yellow powder, the main components is aluminum silicate (Al2O3,2SiO2,2H2O) Physical properties of Kaolin: Mohs Scale Hardness is from 2 to 2.5,density is 2.6 g/cm3 ,and refractoriness is from 1750 to 1790 degree centigrade.Used as friction materials, Kaolin can improve the process performance of friction materials, reduce the shrinkage rate of products , and improve the friction performance of friction materials in 400-600 , reduce the cost. Kaolin is made by crushed kaolin ore .Kaolin is used in Brake pad Drum brake or clutch, The recommended regular consumption of kaolin is from 2% to 8%. The character of Kaolin: Kaolin is named by the kaolin village in Jingdezhen in China where it was found near China, it is clay or clay rock which is mainly of kaolin clay mineral Kaolinite radial clay minerals including kaolinite, halloysite, di stone, Pearl chinastone, water mica, etc. Kaolinite is of soft and hard kinds.Kaolin has many excellent properties. Such as: water absorption, plasticity, suspended, strong cohesive force, high refractoriness, good insulation and chemical stability, and good sintering performance.Add some kaolin in the composition of friction materials, can reduce the brake noise and reduce the heat recession. Property: A1203: 28% min SiO2: 52.4% min Fe203: 5.18% TiO2: 0.96% K2O: 9.18% Na2O: 9.71% grade: 200mesh,325mesh sieving rate: 97%
Kaolin clay Sio2 70 Al203 20
Raw china clay meta kaolin
JAM SNOW Kaolin Clay has less impurities compare to peers in the market yet effective rates. Get in touch with us for further details.
NMCO Offers 4 Grades Of Kaolin: Product - Kaolin Ore Specification Grade A : (Al2O3 % >32-38), (SIO2 % 45-50), (Fe2O3 % 0.2-0.7), (TiO2 % 1-2) Grade B : (Al2O3 % >30-35), (SIO2 % 47-50), (Fe2O3 % 1-1.5), (TiO2 % 1-2) Grade C : (Al2O3 % 28-30), (SIO2 % 50-56), (Fe2O3 % 1.1-1.3), (TiO2 % 1.5-2.3) Grade D : (Al2O3 % 26-28), (SIO2 % 55-62), (Fe2O3 % 1-1.2), (TiO2 % 1.4-2) Shipping mode - Containerized or Bulk Packing - As per client requirement Monthly capacity - 5000 tons
HIGH QUALITY KAOLIN We have kaolin ground up to 15 microns and with a concentration of aluminum oxide up to 36%. Origin: Egypt. Size: Powder "Per Client request". Raw: Selected quality from the best kaolin quarries in Egypt. Usage: This type of kaolin is used in the manufacture of glaze, white cement, ceramics, porcelain, rubber, rubber, electrical insulators, sanitary ware, refractories, ceramics, and others. All your inquiries or requests will be the subject of our attention and interest. For TDS, Please email us and we'll sent it ASAP.
HIGH QUALITY KAOLIN Origin: Egypt. Size: Powder "Per Client request". Raw: Selected quality from the best kaolin quarries in Egypt. Usage: This type of kaolin is used in the manufacture of glaze, white cement, ceramics, porcelain, rubber, rubber, electrical insulators, sanitary ware, refractories, ceramics, and others. All your inquiries or requests will be the subject of our attention and interest. For TDS, Please email us and we'll sent it ASAP.
PRODUCT : KAOLIN (CHINACLAY) GRADE : VM WHITE FORM : POWDER PACKED : 50KG HDPE BAG APPLICATION : FRIT,GLAZE, ENGOBE, CABEL, DETERGENT
325 Mesh High Alumina, low Fe2O3 Lowest moisture
Selectively mined and refined kaolin clay with minimized yellowness. Best suitable for on surface glazing and surface smooth finishes due to its fine psd even in lumps form.
Semi gloss white kaolin lump/chips for higher heat resistance and decent whiteness for engobes, plateform wares, vitrified glazes.
Product: KAOLIN (Yellow) Description: Kaolin is cream soft, fine grained and platy powder filler sourced from mineral Kaolinite. with alternating plates of silica tetrahedral and aluminum octahedral crystal structure Use/Application: Plastics Paint Rubber Ceramics Adhesives Sealants Shelf Life: Indefinite, but a maximum of 2 years is recommended. Packaging: 50kgs, Laminated Polypropylene bags