Hot-rolled carbon steel billets Origin: Ukraine. TU U 322-00190319-1150-94; Sizes (mm): 125x125, 150x150. Packing: not in bundles; Length is: 90 % fixed, 12000 mm (ª200 mm); 10 % random, 10500 mm - 11700 mm; Admissible deviation in the square side: 150x150 mm (ª5.0 mm); 125x125 mm (ª4.0 mm); Diagonal difference in the billet cross-section should not exceed 0.7 of the sum of maximum deviations in the square side; Concavity or convexity of the billet faces as well as difference in any two sides should not exceed half of the sum of maximum deviations in the square side; Torsion should not exceed the product of 3 degrees/m, but not more than 18 degrees; Curvature should not exceed 1.5 %; Spread of the billet ends in the side or diagonal in the place of cut should not exceed 10 %. Standard Export packing
Steel Billets And Grade 2 Rails.
Brass scrap.
Olive oil , urea , sulfur , aluminum ingots , steel billets and many other commodities.
Metal scrap, copper, AL, PB, ZN, brass.
Copper scrap, stainless steel scrap, stainless steel pipe scrap, aluminum scrap, brass scrap, nickel scrap, titanium scrap, zinc scrap, lead scrap, HMS scrap, LMS bundle scrap.
Petroleum Products, Steel Products, Railway Steel Bars Second Unused Railways, Galvanized Steel Sheets And Coils, Billet Steel, Rebar Steel Wire Rod And Rebar In Coils.
Metal scraps, copper, aluminum, zinc, brass, lead, battery scraps.
Wire rod : 5, 5-14, 0 mm. Packing: in coils of 1100-1500 kg, 1500-2100 kg. The height of a coil is up to 1500 mm, 1750 mm; od - 1250 mm; id - 850 mm. Binding with wire rods diam. 5, 5-7, 0 mm: 4 radial bindings and 1 transverse binding. Wire rod + mm as per gost 30136-95 can be also packed in coils up to 550 kg. Dimensions of a coil: height up to 400 mm; od - 1400-1450 mm; id - 850-900 mm. Binding at 2 places. The wire rod is produced according to the following standarts: Wire rod of carbon steel of ordinary quality as per gost 30136-95 (dstu 2770-94); Steel grade as pergost 380-94 Mass fraction of elements, % C Mn Si S P Cr Ni Cu Steel grade Mechanical properties Ultimate tensilestrength, n/mm2, max Relative contraction, %, min Mass of scale, kg/t, min 1kp 430* 66 10 3kp/ps 540 60 10 Wire rod of low carbon and alloyed steel as per tu 14-15-345-94 (for manufacturing welding wire). Steel grade Mass fraction of elements, % C Mn Si S P Cr Ni Al Max Max Max Max Max Max Max Sv 08 0, 10 0, 35-0, 60 0, 03 0, 04 0, 04 0, 15 0, 30 0, 01 Sv 08a 0, 10 0, 35-0, 60 0, 03 0, 03 0, 03 0, 12 0, 25 0, 01 Steel grade Mechanical properties Ultimate tensilestrength, n/mm2, max Relative contraction, %, min Mass of scale, kg/t, max Sv 08, sv 08a 420 60 10 Wire rod as per american standard astm a 510m.
Steel Bars Reinforcing steel bars as per astm a615, grades 40 and 60; ## 3-10. Packing as per request: mini and master coils weighing f_ 1 t, 20-40 feet long. Chemical composition and mechanical properties as per astm a615. Reinforcing steel bars uder can/csa g 30.18-m92, class 400w, 10m-30m. Packing: in bundles, 6 and 12 m long. Chemical composition and mechanical properties are in accordance with standard can/csa g 30.18-m92. Reinforcing steel bars as per din 488 Packing: mini -coils up to 2 tons with a fixed number of bars in a bundle. Master coils up to 5 tons with a fixed number of bars in a bundle.
Hot-rolled carbon steel bars: GOST 535-88, St. 3KP/3PS, St. 5PS as per GOST 380-94: Shapes (equal and unequal angles): Dimensions (mm): 20x20x3-4, 25x25x3-4, 32x32x3-4, 35x35x3-4, 25x25x2,5, 32x32x2,5, 35x35x2,5, 40x40x3-4, 40x40x5, 45x28x4, 50x32x4, in bundles up to 5 tons, with length up to 12000 mm (ª100 mm). Steel grade Mass fraction of elements, % C Mn Si S P Cr Ni Cu max max max max max 3KP 0,14-0,22 0,30-0,60 max 0,05 0,050 0,040 0,30 0,30 0,30 3PS 0,14-0,22 0,40-0,65 0,05-0,15 0,050 0,040 0,30 0,30 0,30 5PS 0,28-0,37 0,50-0,80 0,05-0,15 0,050 0,040 0,30 0,30 0,30 Steelgrade Mechanical properties Ultimate tensilestrength, N/mm2, min Yield strength,N/mm2, min Elongation,S5, %, min 3KP 360 235 27 3PS 370 245 26 5PS 490 285 20
Wheat Test weight -77 kg/hl min Moisture - 14, 5% max Foreign matter -2% max; Hugberg - 250 sec. Min; Gluten - 24% min (iso); Protein on dry basis (n x 5, 7)-.11, 5% min (iso 5983); Alveograph (w) -160 ed min Bug damaged kernels - 1% max; Total contents of radio nuclides v max. 600 beq/kg, radiation dose on the surface of the goods not to exceed v 0.020 mrh/h. In bulk
Cement, urea, steel bars, steel billets and any other steel products, yellow and white corn, sugar, rice , sorghum, newsprint, any type of mercedes benz comercial vehicles and trucks, trailers.Consulting
Various machinery, brass melting furnaces, industrial feasibility studies.
Copper, aluminium, zinc, brass, alloys.
Iron ore pellets pig iron in containers iron mill scale billet 3sp & 5sp slabs hrc crc rebars zinc dust furnace.
Nickle wire Origin Russia 6 million metre nickle wire Available in Dubai FOB Dubai
Advantages: - High Temperature Resistance: the maximum sustained working temperature is up to 70 Degrees Celsius, the maximum transient temperature is up to 95 Degrees Celsius - Heat Preservation: low thermal conductivity which is only 1/1500 of brass pipe, and 1/250 of steel pipe - Non-toxic: no heavy metal additives, would not be covered with dirt or contaminated by bacterium - Corrosion Resistant: resist chemical matters or electron chemical corrosion - Lower Installation Costs: light weight and ease of installation can reduce installation costs by as much as 50% over metal piping system - Long Life: more than 50 years under normal conditions
High-quality, flexible and affordable piping system Easy to use and reliable White color can be used in either hot or cold water applications THERMOPEX is cross-linked polyethylene tubing designed for use within potable water piping systems. THERMOPEX Pipe provides superior durability, corrosion resistance and flexibility for the most demanding environments .THERMOPEX is available in red, white and blue for the simple identification of cold water, hot water and main water lines. The THERMOPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex. Superior flexibility reduces the number of fittings required for installation which also reduces leak points within piping systems
