Please click here to check who's online and chat with them.

Find Verified Metallic Paper Suppliers, Manufacturers and Wholesalers

Top Supplier Cities : -   Tokyo   Japan  
Nov-17-22
 
Good scrap wires need good copper wire recycling machine to process, so do you need it

small copper granulator machine BS-D75 is in running for our Nanjing client. After finish testing, this model BS-D75 wire granulator will be transport
Small capacity, capacity is 50-80kg/h;
Support single-phase electricity, fit for home use.
Sep-29-22
 
mini copper wire granulator machine BS-S05 very well.
Compared with other machines, the BS-S05 small cable wire recycling machine's design has more than two years of development, and we test and run it many times only for the best machine performance, so you can always trust manufacturers.
Jul-26-22
 
BS-D10 small cable granulator is a kind of dry-type copper recycling machine, which is mainly for crushing and separating waste copper particles and plastic skins, so as to achieve the purpose of recycling scrap copper from used waste cable wires.

BS-D10 small wires granulator machine has a small volume and a small output and capacity of processing wires is about 100kg per hour, very suitable for recyclers with few cables or households.
Dry-type small cable granulator does not need to add water for drying and separation, and this copper recycling machine is simple to operate the entire process only requires one worker, which saves both manpower and cost. The dust collection system of the copper granulator machine can effectively collect dust while complying with environmental protection requirements, energy saving, and environmental protection, with zero pollution and zero emissions.

Technical data of this wire granulator machine:
Model: BS-D10 small cable granulator
Processing dimension: Below 20mm
Machine Capacity:100KG/H
Machine weight: 1100KG
Machine size: 2300*1600*2000MM
Motor power: 20KW
Motor voltage: 380V/220V/customized
Jul-14-22
 
Copper wire recycling machine BS-N130 granulates and separates copper and plastic from electric wires, processing capacity is about 600-800kg per hour. After the crushing and separating process, scrap cable wires can be recycled into clean copper rice with a 99.9% high copper separating rate, are you interested

For different kinds of scrap wires, the wire recycling machines capacity is as follows:
1. For 4 6 square wire, capacity can reach 600-800KG/H
2. For 1.5 2.5 square wire, capacity can reach 500-700KG/H
3. For car wire and plug wire, copper content is 45-50%, and capacity can reach 400-60KG/H
4. For mixed wire, copper content 20-30%, capacity can reach 300-500KG/H.


Technology data of copper wires separator recycling machine:
Name: Copper cable wire separator recycling machine
Model: BS-N130
Processing dimension: Below 50mm
Machine Capacity: 600-800KG/H
Machine weight: 5000KG
Machine size: 1200*3500*2250MM
Motor power: 67KW
Motor voltage: 380V/customized
Aug-25-22
 
A car starter pulling machine is used in the final step of car starter dismantling, pulling out the copper winding from the scrap motor stator. After the insulating film melts, the copper wire pulling machine pulls copper wires from never cuts the stator side and complete dismantling and copper recycling of the entire automobile starter.

Technical data of car starter puller machine:
Machine Processing Efficiency: More than 350pcs/h
Machine Weight: 460kg
Package Weight: 500kg
Machine Power: 4KW
18 Metallic Paper Suppliers
Short on time? Let Metallic Paper sellers contact you.
Aug-24-22
 
Car starter heating machine is a kind of motor wrecker machine and is designed for recycling car starter motor. Car starter heating equipment is mainly used for rapid heating, and melting insulating film to cooperate with car starter pulling recycling machine to pull out copper winding wires because rotor copper wire is wrapped with a layer of the insulation film, which has a strong bonding effect.

And this motor wrecker machine needs to be heated quickly by high-frequency heating equipment to melt the insulation film and facilitate copper winding wires pulling out to achieve scrap copper recycling.

Technical data of this car starter recycling machine:
Machine Name: Car starter heating machine
Machine Processing Efficiency: More than 350pcs/h
Machine Weight: 236kg
Package Weight: 270kg
Machine Size: 1.2 1.2 1.35M
Package Size: 1.3 1.3 1.45M
Machine Power: 85KW
Jul-14-22
 
The electric motor puller machine from the a kind of copper recycling machine, used to pull all the copper winding wires from the motor stator.
BSM-30 electric motor puller machine often works together with copper motor cutting machine, better recycling all the copper winding wires from the waste motor stator.

Technology data of copper motor pulling machine:
Machine model: BSM-30
Machine size: 2310*770*950mm
Machine weight: 395kg
Packing size: 2010*820*1050MM
Packing weight: 420kg
Dec-21-22
 
Our D series cheap copper granulator machine is working, and this testing video show you the machine details and the working process.
a professional copper recycling machine provider, and we supply high-quality copper recycling machines and the best services to our clients.
D series copper wire recycling machine has small and medium processing capacity and has cheap prices, economical and practical.

Do you like this model wire granulator
Oct-14-22
 
Is motor worth recycling
Of course, it is worth to recycle copper winding wires from scrap motor.

This new finished ST-400 motor cutting pulling machine is being tested for our Slovenia client.
ST-400 motor cutting pulling machine, one kind of motor recycling machine, mainly used to cut and pull copper winding wires from motor stator.
Processing range(motor diameter) is 90-260mm;
Safe and high efficiency, very popular in Europe copper recycling field
Aug-26-22
 
Large capacity copper cable granulating machine BS-A1100 is our BSGH largest capacity copper wire recycling machine, which can process almost all types of waste cables with a capacity of 1.5-2T per hour.

BS-A1100 copper cable granulator machine adopts an automatic pusher system for feeding scrap wires and forklift loading and feeding electric wires Instead of traditional manual feeding, feeding amount is large at a time and feeding speed is fast.
A fully automatic operating system makes our wires copper recycling machine only need 1-2 skilled workers to operate too quickly and efficiently separate copper and plastic from waste cables so as to let you get the pure copper and pure plastic in the end.

Technology data of copper cable recycling machine:
Model: BS-A1100
Processing capacity: 1.5-2T/H
Separation rate: 99.9%
Machine weight: 17tons
Motor Power: 128KW
Motor Voltage: 380V/220V/customized
Jul-28-22
 
Small copper wire granulator machine BS-D75 is used to separate copper granules and plastic granules from waste cable wires. This new model copper granulator machine has a small capacity and small size, very very fit for home use.

This mini copper wire granulator machine BS-D75 processing capacity is about 50-80kg per hour, has a quick processing speed, and has high work efficiency. If you need a copper wire recycling machine to process wires in your home, this model mini cable granulator machine fits you well.

Technical data of copper wire granulator machine:
Machine Model: BS-D75 copper wire recycling machine
Process Cable Diameter Range: Below 25mm
Machine Capacity: 80-100KG/H
Machine Weight: 1500kg
Machine Size: 1700*1600*2200mm
Motor Power: 18KW

Advantages of small copper recycling machine:
1. Has mini size, mini capacity, and low noise, fit for home use;
2. High copper separating rate, and this model copper recycling machines copper separating rate can reach 99.9%;
3. Has the lowest price because of factory direct sale, fit for wholesale;
4. Automatic, save time and manpower for you;
5. The final product is pure copper and pure plastic, makes lots of money for you;

Do you need to recycle your copper wires
Jul-26-22
 
Bestseller cable granulator machine BS-D20 is used to process waste cables that cannot be processed by a wire stripping machine, including automobile cables, communication cables, scrap wires, electric wires, and other cables diameter within 25mm.
Copper and plastic are vibrated and separated by an air separator and vibrating tables after crushing, which can completely separate copper and plastic, and achieve the purpose of recycling waste cables. Of course, you also can add an electrostatic separation device on a copper wire granulator machine that can make the recovery rate of scrap copper close to 100%, which brings high economic benefits.


Technical data of cable granulator machine:
Model: BS-D20
Processing dimension: Below 20mm
Machine Capacity: 200KG/H
Machine weight: 1600KG
Machine size: 2700*1700*2100mM
Motor power: 28KW
Motor voltage: 380V/220V/customized

Welcome to know more about this small cable granulator machine
Jul-14-22
 
BS-N125 copper wire granulator machine from the BSGH factory is a multifunctional copper recycling machine, that not only can process copper wires and aluminum wires, but also can process small radiators, transformers, fuses, and cable plugs.
As a copper wire granulator machine BS-N125, first crushing the wasted copper wires, then separate the copper and plastic 100% and the separating rate can reach up to 99.9%. Output can be as higher as 3000-4000 kg per day. And you will get pure copper and pure plastic in the end.

Technology data of copper cable granulator machine show for you:
Model: BS-N125
Processing dimension: Below 20mm
Machine Capacity: 300-500KG/H
Machine weight: 3200KG
Machine size: 390*200*225CM
Motor power: 40.5KW
Motor voltage: 380V/customized

If you need to separate and recycle your copper wire, this copper recycling machine fits you well. Are you interested in making money by recycling copper from wires?
Aug-26-22
 
What is twin shaft shredder machine

This is a customized metal shredder with red color, used to cut and shred soft scrap metal, such as scrap copper, scrap aluminum, scrap iron, scrap steel, and so on.

Are you interested in this copper shredder
Equipped with two copper motors, one on each side of the shredder;
High machine quality and good machine performance, also have a long machine life.
Low speed and high torque, low noise and low dust;
PLC control, equipped with an independent electric box, is safe and reliable
Aug-05-22
 
Want to process and recycle your scrap PCB boards
Look here, new finished PCB recycling machine is in hot selling, are you interested

How do you scrap a PCB
This PCB recycling machine from our BSGH factory is useful for you, crushing and separating metal and nonmetal from waste PCB boards.
This PCB separator machine is a kind of multi-function metal recycling machine, not only separating scrap PCB boards but also separating copper and plastic from cable wires.
Has high machine quality and good machine performance;
The processing capacity of this PCB board recycling machine is about 200kg per hour;

The technical data of this PCB separating recycling machine:
PCB processing capacity: 200kg/h
Cable wire processing capacity: 200-300kg/h
Machine size: 2290*1825*2100mm
Motor power:15.99KW
Jul-27-22
 
BS-D60 automatic wire chopper machine can be used to process and recycle waste communication wires, automobile wires, household appliances wires, and other waste cables, etc, crushing scrap wires and completely separating copper and plastic with a 99.99% copper separating rate, and use dust collection device to effectively control overflow of dust to ensure that there is no dust pollution and no pollution to the environment.

As long as your wire diameter is under 25mm, this copper wire chopper recycling machine can process well and you can get the copper rice in the end.

Model: BS-D60 copper wire recycling machine
Process Range: Below 30mm
Machine Capacity: 300-500kg/h
Machine weight: 3.5tons
Machine size: 4000*2000*2250MM
Motor Power: 48KW
Motor Voltage: 380V /Customized
Machine Frequency: 50HZ/Customized

Advantages of this copper wire chopper machine:
1. Factory direct sales, affordable and cost-effective;
2. Belongs to medium-sized BSGH D series copper recycling machine with a processing capacity of 300-500kg/h;
3. Can ensure complete separation of copper and plastic (metal and non-metal);
4. High work efficiency, saving labor;
5. Easy maintenance and easy replacement of wearing parts;
Aug-17-22
 
This new product wire stripping machine is used to strip wires for recycling scrap metal. This wire stripping machine not only can process single-core wires but also can process multi-core wires, very useful and convenient.
Fast processing speed and high working efficiency make this wire stripping machine popular in the copper recycling market, are you

Machine name: wire stripping machine
Processing range: 20-60mm normal cable
Machine size: 900*600*1370mm
Machine weight: 320KG
Motor power: 3KW
Aug-25-22
 
Big capacity radiator recycling line BS-ACP1000 is used to separate copper, aluminum, and iron from the waste radiator. Compared with the ordinary copper and aluminum radiator recycling machine, the biggest advantage of BSGH's new scrap radiator separator recycling line is that it can directly process all kinds of waste radiators without pre-cutting scrap radiators.
Advanced technology and complete process flow ensure the separation and recovery of copper and aluminum and realize the regeneration of metal resources. The separation efficiency of copper and aluminum is greater than 99%, and the separation efficiency of iron is greater than 99%, the dust removal efficiency is greater than 99.9%.

Technical data of radiator recycling machine is as follows:
Model: BS-ACP1000
Application material: All kinds of radiators from the air conditioners, cars, water tanks, and so on
Processing capacity: 2-3T/H
Separate recycling rate: 99%
Dust recycling rate: 99%
Machine Power: About 149.55KW
Machine Size: 27000 8000 5000MM
18 Metallic Paper Suppliers
Short on time? Let Metallic Paper sellers contact you.